Manuals+ Q&A

Product questions answered from manuals and real user problems

Find setup steps, compatibility notes, troubleshooting help, maintenance guidance, and answers tied back to Manuals+ documents.

nt que ma trottinette s'allume avec une clé , les boutons de controles ne marchent plus mais l'affichage est allumé losque la clé est tournée . De quoi cela vient il svp ? merci beaucoup pour votre réponse 2026-06-26 13:44:15 1 answer

Why are the control buttons not working on my iScooter iX4 even though the display turns on with the key?

Based on the iScooter iX4 manual and the symptoms described, here are the potential causes and troubleshooting steps for your control panel issue:Communication Fault (Error E10): Check your display for an E10 error code. This indicates a communication fault between the controller...

Related manual

Peter 2026-06-26 13:08:08 1 answer

How do I open the device to change the battery?

To change the battery on your VAN RYSEL KIT202 sensor, follow these steps:Locate the battery cover on the back of the sensor.Use a small coin or a similar flat tool to turn the battery cover counter-clockwise from the locked position to the...

Related manual

Anonymous 2026-06-26 12:45:17 1 answer

Is the Ring RJS010 Lithium Jump Starter compatible with hybrid vehicles?

The instruction manual for the Ring RJS010 Lithium Jump Starter does not explicitly list or exclude hybrid vehicles. However, it provides the following critical guidance regarding vehicle compatibility:Check Manufacturer Instructions: The manual states that modern vehicles contain extensive electronic systems and you...

Related manual

Hector Meneses 2026-06-26 12:44:16 1 answer

Does the XTOOL IP500-DJC automotive scanner perform relearn functions?

Yes, the XTOOL IP500-DJC supports various relearn and calibration functions, which are listed under its "Special Functions" and "Bi-Directional Controls."According to the manual, the tool can perform several specific relearn and initialization tasks, including:Throttle Reset: Resets the throttle body to adjust for...

Related manual

Rolf Mink 2026-06-26 12:11:34 1 answer

I would like to buy the set with one input, as I have an AV receiver with two HDMI outputs. My TV is an LG 65OLED G6LW68. The set up to 65 inches would be my choice, but I don't see how long the LED strip is, because I want to go to the outer edge of the TV. Can I then choose the larger version, from 70 inches LED strip? Or will there be problems with the electronics that are matched to the strip? I would appreciate a response.

The provided manual for the FANCYLEDS FSB1P2.1 HDMI 2.1 Fancy Sync Box does not specify the exact length of the LED strips included with different size kits, nor does it explicitly state whether a larger LED strip (e.g., for 70 inches or...

Related manual