За соработници, препродавачи, ISV и партнери од Алијансата
Глобална
Верзија: Само активна
Ќе се прикажуваат само производи за кои се знае дека се достапни за продажба
Треба да обезбедите ажурирање или промена?
Контакт mailto:pgw786@zebra.com
For Internal Use by
PartnerConnect Member Only
Сопственост и доверлив. ZEBRA и стилизираната глава на Зебра се заштитни знаци на Zebra Technologies Corp., регистрирани во многу јурисдикции ширум светот.
Сите други трговски марки се сопственост на нивните соодветни сопственици. ©Zebra Technologies Corp. и/или нејзините филијали. Сите права се задржани.
KC50 Technical Accessory Guide
ЗАБЕЛЕШКА: Овој документ е само за општа референца. Solutions Pathway и поврзаните PMB треба да се користат за достапност на производи, цени и избор на финално решение.
* Зебра не поддржува ниту конкретно препорачува ниту една производи, додатоци или хардвер од трета страна. ЗЕБРА ОДГОВАРА СЕКАКВА И СЕКАКВА ОДГОВОРНОСТ, ВКЛУЧУВАЈЌИ СИ ИЗРАЗНИ ИЛИ ИМПЛИЦИРАНИ ГАРАНЦИИ, УСНИ ИЛИ ПИСМЕНИ, ЗА ТАКВИ ПРОИЗВОДИ, ДОДАТОЦИ ИЛИ ХАРДВЕР НА ТРЕТИ ЛИЦА. КЛИЕНТОТ ПРИЗНАВА ДЕКА ЗЕБРА НЕ ПРЕТСТАВУВА НИКАКО ЗА ПОДОБРУВАЊЕТО НА ПРОИЗВОДИ, ДОДАТОЦИ ИЛИ ХАРДВЕР НА ТРЕТИ ЛИЦА ЗА НАМЕНАТА НАМЕНА НА КЛИЕНТОТ.
комуникациски кабли
| Број на дел | Слика | Опис | Белешки | Потребни артикли |
| CBL-TC5X-USBC2A-01 |  |
USB-C кабел | ►Used to communicate with KC50 via the USB-C port. ►USB-A to USB-C connector |
|
| CBL-TC2X-USBC-01 |  |
USB-C кабел | ►Used to communicate with KC50 via the USB-C port. ►USB-A to USB-C connector ►Cable length is 5 ft. (1.5M) |
|
| CBL-EC5X-USBC3A-01 |  |
USB-C кон USB-C кабел | ►USB-C to USB-C cable ►Cable length is 1m (approx 3.2 ft.). ►Supports USB 3.0 and USB Fast Charge ►Cable is also used to connect KC50 to TD50. |
Z-Flex Accessories
| Број на дел | Слика | Опис | Белешки | Потребни артикли |
| ZFLX-SCNR-E00 |  |
Скенер | ►Uses SE4720 scan engine. ►Connects to USB-C port on side of KC50 ►Captive screws secure scanner to KC50. |
|
| ZFLX-LTBAR-200 |  |
Лесна лента | ►Two sided light bar ►Connects to USB-C port on side of KC50 ►RGB colors ►Captive screws secure light bar to KC50. |
Secondary Displays
| Број на дел | Слика | Опис | Белешки | Потребни артикли |
| TD50-15F00 |  |
TD50 15″ Touch Screen Monitor | ►Provides a secondary touch screen monitor. ►Connects to USB-C port on rear of KC50 via USB-C to USB-C cable. Cable provides both power and data/communications. ►15″ size, full HD display. |
►USB-C Cable (CBL-EC5X-USBC3A-01) |
| CBL-EC5X-USBC3A-01 | |
USB-C кон USB-C кабел | ►USB-C to USB-C cable ►Cable length is 1m (approx 3.2 ft.). ►Supports USB 3.0 and USB Fast Charge |
Разно
| Број на дел | Слика | Опис | Белешки | Потребни артикли |
| KT-MC18-CKEY-20 |  |
Release Tool/Key | ►Used to release the access panels on the rear of the KC50 (i.e. Z-Flex port covers and VESA mounting covers). ►Pack of 20 keys |
Опции за монтирање
Havis Stands
| Број на дел | Слика | Опис | Белешки | Потребни артикли |
| 3PTY-SC-2000-CF1-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Countertop Height Base, Single Monitor
|
►Stand allows mounting of one KC50 for single-screen facing applications. ►Height of stand positions center of KC50 display around 16 in. (410mm) ►Stand can be further lengthened by adding Riser Box or Printer Box. ►Base of stand measures approx. 10.25 x 10.25 in. (258 x 258 mm). |
  |
| 3PTY-SC-2000-CF2-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Countertop Height Base, Back-to-Back Monitor |
►Stand allows mounting of one KC50 and one TD50 monitor for dual-screen facing applications. ►Height of stand positions center of primary display around 16 in. (410mm) and center of secondary display around 14 in. (352 mm). ►Stand can be further lengthened by adding Riser Box or Printer Box. ►Base of stand measures approx. 10.25 x 10.25 in. (258 x 258 mm). |
  |
| 3PTY-SC-2000-PB1-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Pedestal Base, Single Monitor |
►Stand allows mounting of one KC50 for single-screen facing applications. ►Height of stand positions center of KC50 display around 41.25 in. (1047 mm). ►Stand can be further lengthened by adding Riser Box or Printer Box. This is typically done to create a floor to eye level walk-up kiosk solution. ►Base of stand measures 15 x 16 in. (381 x 406 mm). |
  |
| 3PTY-SC-2000-PB2-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Pedestal Base, Back-to-Back Monitor |
►Stand allows mounting of one KC50 and one TD50 monitor for dual-screen facing applications. ►Height of stand positions center of primary display around 41.25 in. (1047 mm) and center of secondary display around 40 in. (1013 mm). ►Stand can be further lengthened by adding Riser Box or Printer Box. This is typically done to create a floor to eye level walk-up kiosk solution. ►Base of stand measures 15 x 16 in. (381 x 406 mm). |
  |
Havis Riser Options for Stands
| Број на дел | Слика | Опис | Белешки | Потребни артикли |
| 3PTY-SC-2000-R1-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand Riser | ►Riser extends the height of Kiosk Stands with Countertop Base or Pedestal Base. ►Adds additional 10.6 in (269 mm) height. |
  |
| 3PTY-SC-2000-PE-02
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Printer Enclosure | ►Enclosure extends the height of Kiosk Stands with Countertop Base or Pedestal Base. ►Adds additional 10.6 in (269 mm) height. ►Compatible with Epson T-88VII receipt printer with additional printer models being validated. ►Door with magnetic latch provides convenient access to printer for paper reloading or maintenance. |
  |
Additional Havis Stand Accessories
| Број на дел | Слика | Опис | Белешки | Потребни артикли |
| 3PTY-SC-2000-PA-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand Payment Mounting Bracket | ►Allows payment devices to mounted to side of kiosk. ►Payment device holder (i.e. bucket) may need to be ordered separately from Havis webсајт. |
Power Cords/ Power Supplies
Note: There are two ways to power the KC50, either AC power or via 802.3at/802.3bt PoE (Power over Ethernet). POE requires Premium KC50 config.
AC Power Supply options
| Број на дел | Слика | Опис | Белешки | Потребни артикли |
| PWR-BGA24V78W4WW |  |
Напојување | ►100-240V AC input, 24V 3.25A, 78W DC output | AC Line кабел (23844-00-00R или верзија специфична за земја) |
| 23844-00-00 Р |  |
Кабел за наизменична струја | ►This AC Line Cord is for use in North America. See the AC Line Cords by Country TAG за споредливи жици за користење во други земји. |
PoE (Power over Ethernet) Power Supply options
Premium config versions of the KC50 support Class 4, 6 and 8 POE power classes
TIP: To prevent any POE accessory power limitations use a Class 8 802.3bt power supply.
The power supplies listed below have been validated by Zebra Engineering to function with KC50
| Класа на моќност | Power from PSE | Power delivered to PD | |
| Type 1802.3af | Класа 1 | 4W | 3.84 W |
| Класа 2 | 7W | 6.49 W | |
| Класа 3 | 15.4 W | 13 W | |
| Type 2 802.3at | Класа 4 | 30 W | 25.5 W |
| Type 3 802.3bt | Класа 5 | 45 W | 40 W |
| Класа 6 | 60 W | 51 W | |
| Type 4 802.3bt | Класа 7 | 75 W | 62 W |
| Класа 8 | 90 W | 71.3 W |
| Број на дел | Слика | Опис | Белешки | Потребни артикли |
| PD-9601GC
(трета страна) * |
 |
Microchip 90W PoE Power Supply | ►Used to power KC50 via Power over Ethernet (PoE). ►Provides 90W output (802.3bt Class 8) |
|
| PD-9501GC/SP
(трета страна) * |
 |
Microchip 60W PoE Power Supply | ►Used to power KC50 via Power over Ethernet (PoE). ►Provides 60W output (802.3bt Class 6) ►Includes surge suppression |
|
| PD-9001GR/SP
(трета страна) * |
 |
Microchip 30W PoE Power Supply | ►Used to power KC50 via Power over Ethernet (PoE). ►Provides 30W output (802.3at Class 4) ►Includes surge suppression |
KC50 TAG
Зебра доверливо. Само за внатрешна употреба на примачот
Датум на ажурирање на документот: 10
NOTE: Items highlighted in grey may not be orderable/available
Документи / ресурси
 |
ZEBRA KC50 Android Kiosk Computer [pdf] Упатство за корисникот CBL-TC5X-USBC2A-01, CBL-TC2X-USBC-01, ZFLX-SCNR-E00, ZFLX-LTBAR-200, TD50-15F00, KT-MC18-CKEY-20, 3PTY-SC-2000-CF1-01, KC50 Android Kiosk Computer, KC50, Android Kiosk Computer, Kiosk Computer, Computer |
