Bakeng sa Associates, Resellers, ISVs le Alliance Partners
Lefatšeng ka bophara
Phetolelo: Active-Feela
E tla bontša feela lihlahisoa tse tsebahalang hore lia rekisoa
Na u hloka ho fana ka ntlafatso kapa phetoho?
Ikopanye mailto:pgw786@zebra.com
For Internal Use by
PartnerConnect Member Only
Mong'a le Lekunutu. ZEBRA le setaele sa Zebra head ke matshwao a kgwebo a Zebra Technologies Corp., a ngodisitsweng dibakeng tse ngata lefatsheng ka bophara.
Matshwao a mang kaofela ke thepa ya beng ba ona. ©Zebra Technologies Corp. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
KC50 Technical Accessory Guide
ELA HLOKO: Tokomane ena ke ea litšupiso tse akaretsang feela. Tsela ea Tharollo le li-PMB tse amanang le tsona li lokela ho sebelisoa bakeng sa ho fumaneha ha lihlahisoa, litheko, le khetho ea ho qetela ea tharollo.
* Zebra ha e buelle kapa ha e khothalletse leha e le efe ka ho toba lihlahisoa tsa mokha oa boraro, lisebelisoa, kapa hardware. ZEBRA E HLOKOMELA MOLATO O MANG LE MANG KAOFELA, HO kenyeletswa TIISETSO EFE KAPA E FELENG KAPA E FIHLWENG, E KA BA E KA MORWA KAPA E NGOLWA, BAKENG SA LIHLAHISO TSE JOANG LA MOKHATLO OA BORARO, LITLHOKOMELISO KAPA HARDWARE. MOREKI O A RUA HORE HA HO BOEMELI E ETSOANG KE ZEBRA MABAPI LE HO TSHWANELA HA LIHLAHISO, LITLHAKANISO, KAPA SEBELE SEEMENG SA MOTHO OA BORARO.
Likhoele tsa Puisano
| Nomoro ea Karolo | Setšoantšo | Tlhaloso | Lintlha | Lintho Tse Hlokehang |
| CBL-TC5X-USBC2A-01 |  |
Cable ea USB-C | ►Used to communicate with KC50 via the USB-C port. ►USB-A to USB-C connector |
|
| CBL-TC2X-USBC-01 |  |
Cable ea USB-C | ►Used to communicate with KC50 via the USB-C port. ►USB-A to USB-C connector ►Cable length is 5 ft. (1.5M) |
|
| CBL-EC5X-USBC3A-01 |  |
thapo ya USB-C ho isa ho USB-C | ►USB-C to USB-C cable ►Cable length is 1m (approx 3.2 ft.). ►Supports USB 3.0 and USB Fast Charge ►Cable is also used to connect KC50 to TD50. |
Z-Flex Accessories
| Nomoro ea Karolo | Setšoantšo | Tlhaloso | Lintlha | Lintho Tse Hlokehang |
| ZFLX-SCNR-E00 |  |
Scanner | ►Uses SE4720 scan engine. ►Connects to USB-C port on side of KC50 ►Captive screws secure scanner to KC50. |
|
| ZFLX-LTBAR-200 |  |
Leseli Bar | ►Two sided light bar ►Connects to USB-C port on side of KC50 ►RGB colors ►Captive screws secure light bar to KC50. |
Secondary Displays
| Nomoro ea Karolo | Setšoantšo | Tlhaloso | Lintlha | Lintho Tse Hlokehang |
| TD50-15F00 |  |
TD50 15″ Touch Screen Monitor | ►Provides a secondary touch screen monitor. ►Connects to USB-C port on rear of KC50 via USB-C to USB-C cable. Cable provides both power and data/communications. ►15″ size, full HD display. |
►USB-C Cable (CBL-EC5X-USBC3A-01) |
| CBL-EC5X-USBC3A-01 | |
thapo ya USB-C ho isa ho USB-C | ►USB-C to USB-C cable ►Cable length is 1m (approx 3.2 ft.). ►Supports USB 3.0 and USB Fast Charge |
Tse ling
| Nomoro ea Karolo | Setšoantšo | Tlhaloso | Lintlha | Lintho Tse Hlokehang |
| KT-MC18-CKEY-20 |  |
Release Tool/Key | ►Used to release the access panels on the rear of the KC50 (i.e. Z-Flex port covers and VESA mounting covers). ►Pack of 20 keys |
Mounting Options
Havis Stands
| Nomoro ea Karolo | Setšoantšo | Tlhaloso | Lintlha | Lintho Tse Hlokehang |
| 3PTY-SC-2000-CF1-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Countertop Height Base, Single Monitor
|
►Stand allows mounting of one KC50 for single-screen facing applications. ►Height of stand positions center of KC50 display around 16 in. (410mm) ►Stand can be further lengthened by adding Riser Box or Printer Box. ►Base of stand measures approx. 10.25 x 10.25 in. (258 x 258 mm). |
  |
| 3PTY-SC-2000-CF2-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Countertop Height Base, Back-to-Back Monitor |
►Stand allows mounting of one KC50 and one TD50 monitor for dual-screen facing applications. ►Height of stand positions center of primary display around 16 in. (410mm) and center of secondary display around 14 in. (352 mm). ►Stand can be further lengthened by adding Riser Box or Printer Box. ►Base of stand measures approx. 10.25 x 10.25 in. (258 x 258 mm). |
  |
| 3PTY-SC-2000-PB1-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Pedestal Base, Single Monitor |
►Stand allows mounting of one KC50 for single-screen facing applications. ►Height of stand positions center of KC50 display around 41.25 in. (1047 mm). ►Stand can be further lengthened by adding Riser Box or Printer Box. This is typically done to create a floor to eye level walk-up kiosk solution. ►Base of stand measures 15 x 16 in. (381 x 406 mm). |
  |
| 3PTY-SC-2000-PB2-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Pedestal Base, Back-to-Back Monitor |
►Stand allows mounting of one KC50 and one TD50 monitor for dual-screen facing applications. ►Height of stand positions center of primary display around 41.25 in. (1047 mm) and center of secondary display around 40 in. (1013 mm). ►Stand can be further lengthened by adding Riser Box or Printer Box. This is typically done to create a floor to eye level walk-up kiosk solution. ►Base of stand measures 15 x 16 in. (381 x 406 mm). |
  |
Havis Riser Options for Stands
| Nomoro ea Karolo | Setšoantšo | Tlhaloso | Lintlha | Lintho Tse Hlokehang |
| 3PTY-SC-2000-R1-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand Riser | ►Riser extends the height of Kiosk Stands with Countertop Base or Pedestal Base. ►Adds additional 10.6 in (269 mm) height. |
  |
| 3PTY-SC-2000-PE-02
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Printer Enclosure | ►Enclosure extends the height of Kiosk Stands with Countertop Base or Pedestal Base. ►Adds additional 10.6 in (269 mm) height. ►Compatible with Epson T-88VII receipt printer with additional printer models being validated. ►Door with magnetic latch provides convenient access to printer for paper reloading or maintenance. |
  |
Additional Havis Stand Accessories
| Nomoro ea Karolo | Setšoantšo | Tlhaloso | Lintlha | Lintho Tse Hlokehang |
| 3PTY-SC-2000-PA-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand Payment Mounting Bracket | ►Allows payment devices to mounted to side of kiosk. ►Payment device holder (i.e. bucket) may need to be ordered separately from Havis websebaka. |
Power Cords/ Power Supplies
Note: There are two ways to power the KC50, either AC power or via 802.3at/802.3bt PoE (Power over Ethernet). POE requires Premium KC50 config.
AC Power Supply options
| Nomoro ea Karolo | Setšoantšo | Tlhaloso | Lintlha | Lintho Tse Hlokehang |
| EA-PWR-BGA24V78W4WW |  |
Phepelo ea motlakase | ►100-240V AC input, 24V 3.25A, 78W DC output | AC Line Cord (23844-00-00R kapa mofuta o ikhethileng oa naha) |
| 23844-00-00R |  |
Mohala oa AC Line | ►This AC Line Cord is for use in North America. See the AC Line Cords by Country TAG bakeng sa likhoele tse bapisoang ho sebelisoa linaheng tse ling. |
PoE (Power over Ethernet) Power Supply options
Premium config versions of the KC50 support Class 4, 6 and 8 POE power classes
TIP: To prevent any POE accessory power limitations use a Class 8 802.3bt power supply.
The power supplies listed below have been validated by Zebra Engineering to function with KC50
| Sehlopha sa Matla | Power from PSE | Power delivered to PD | |
| Type 1802.3af | Sehlopha sa 1 | 4W | 3.84 W |
| Sehlopha sa 2 | 7W | 6.49 W | |
| Sehlopha sa 3 | 15.4 W | 13 W | |
| Type 2 802.3at | Sehlopha sa 4 | 30 W | 25.5 W |
| Type 3 802.3bt | Sehlopha sa 5 | 45 W | 40 W |
| Sehlopha sa 6 | 60 W | 51 W | |
| Type 4 802.3bt | Sehlopha sa 7 | 75 W | 62 W |
| Sehlopha sa 8 | 90 W | 71.3 W |
| Nomoro ea Karolo | Setšoantšo | Tlhaloso | Lintlha | Lintho Tse Hlokehang |
| PD-9601GC
(Mokha oa boraro) * |
 |
Microchip 90W PoE Power Supply | ►Used to power KC50 via Power over Ethernet (PoE). ►Provides 90W output (802.3bt Class 8) |
|
| PD-9501GC/SP
(Mokha oa boraro) * |
 |
Microchip 60W PoE Power Supply | ►Used to power KC50 via Power over Ethernet (PoE). ►Provides 60W output (802.3bt Class 6) ►Includes surge suppression |
|
| PD-9001GR/SP
(Mokha oa boraro) * |
 |
Microchip 30W PoE Power Supply | ►Used to power KC50 via Power over Ethernet (PoE). ►Provides 30W output (802.3at Class 4) ►Includes surge suppression |
KC50 TAG
Qwaha Lekunutu. Bakeng sa ts'ebeliso ea kahare ea moamoheli feela
Letsatsi la Nchafatso ea Litokomane: 10/2/24
NOTE: Items highlighted in grey may not be orderable/available
Litokomane / Lisebelisoa
 |
ZEBRA KC50 Android Kiosk Computer [pdf] Bukana ea Mosebelisi CBL-TC5X-USBC2A-01, CBL-TC2X-USBC-01, ZFLX-SCNR-E00, ZFLX-LTBAR-200, TD50-15F00, KT-MC18-CKEY-20, 3PTY-SC-2000-CF1-01, KC50 Android Kiosk Computer, KC50, Android Kiosk Computer, Kiosk Computer, Computer |
