Don Abokan hulɗa, Masu siyarwa, ISVs da Abokan Hulɗa
Duniya
Siga: Aiki-kawai
Za a nuna samfuran da aka san suna samuwa don siyarwa
Kuna buƙatar samar da sabuntawa ko canji?
Tuntuɓar mailto:pgw786@zebra.com
For Internal Use by
PartnerConnect Member Only
Mallaka da Sirri. ZEBRA da mai salo shugaban Zebra alamun kasuwanci ne na Zebra Technologies Corp., masu rijista a yankuna da yawa a duniya.
Duk sauran alamun kasuwanci mallakin masu su ne. ©Zebra Technologies Corp. da/ko masu haɗin gwiwa. An kiyaye duk haƙƙoƙi.
KC50 Technical Accessory Guide
NOTE: Wannan takarda don magana gabaɗaya ce kawai. Hanyar mafita da PMBs masu alaƙa yakamata a yi amfani da su don samun samfur, farashi, da zaɓin mafita na ƙarshe.
* Zebra baya yarda ko musamman shawarar kowane samfura, na'urorin haɗi, ko kayan aiki na ɓangare na uku. ZEBRA TA KARE KOWANE DA DUKAN ALhaki, gami da WANI GARANTI KO WANI GARANTI, KO BAKI KO RUBUTU, DON IRIN WADANNAN KYAKKYAWAR BANGAREN JAM'I NA UKU, KAYAN KYAUTA, KO HARDWARE. Abokin ciniki ya yarda cewa BABU WANI WAKILI DA ZEBRA YA YI GAME DA INGANTATTUN KAYAYYA, KAYAN KAYA, KO HARDWARE DOMIN NUFIN NUFIN ABUBAKAR.
Kayan sadarwa
| Lambar Sashe | Hoto | Bayani | Bayanan kula | Abubuwan da ake buƙata |
| Saukewa: CBL-TC5X-USBC2A-01 |  |
USB-C USB | ►Used to communicate with KC50 via the USB-C port. ►USB-A to USB-C connector |
|
| CBL-TC2X-USBC-01 |  |
USB-C USB | ►Used to communicate with KC50 via the USB-C port. ►USB-A to USB-C connector ►Cable length is 5 ft. (1.5M) |
|
| CBL-EC5X-USBC3A-01 |  |
USB-C zuwa kebul na USB-C | ►USB-C to USB-C cable ►Cable length is 1m (approx 3.2 ft.). ►Supports USB 3.0 and USB Fast Charge ►Cable is also used to connect KC50 to TD50. |
Z-Flex Accessories
| Lambar Sashe | Hoto | Bayani | Bayanan kula | Abubuwan da ake buƙata |
| ZFLX-SCNR-E00 |  |
Scanner | ►Uses SE4720 scan engine. ►Connects to USB-C port on side of KC50 ►Captive screws secure scanner to KC50. |
|
| ZFLX-LTBAR-200 |  |
Hasken Bar | ►Two sided light bar ►Connects to USB-C port on side of KC50 ►RGB colors ►Captive screws secure light bar to KC50. |
Secondary Displays
| Lambar Sashe | Hoto | Bayani | Bayanan kula | Abubuwan da ake buƙata |
| Saukewa: TD50-15F00 |  |
TD50 15″ Touch Screen Monitor | ►Provides a secondary touch screen monitor. ►Connects to USB-C port on rear of KC50 via USB-C to USB-C cable. Cable provides both power and data/communications. ►15″ size, full HD display. |
►USB-C Cable (CBL-EC5X-USBC3A-01) |
| CBL-EC5X-USBC3A-01 | |
USB-C zuwa kebul na USB-C | ►USB-C to USB-C cable ►Cable length is 1m (approx 3.2 ft.). ►Supports USB 3.0 and USB Fast Charge |
Misc
| Lambar Sashe | Hoto | Bayani | Bayanan kula | Abubuwan da ake buƙata |
| KT-MC18-CKEY-20 |  |
Release Tool/Key | ►Used to release the access panels on the rear of the KC50 (i.e. Z-Flex port covers and VESA mounting covers). ►Pack of 20 keys |
Zaɓuɓɓukan hawa
Havis Stands
| Lambar Sashe | Hoto | Bayani | Bayanan kula | Abubuwan da ake buƙata |
| 3PTY-SC-2000-CF1-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Countertop Height Base, Single Monitor
|
►Stand allows mounting of one KC50 for single-screen facing applications. ►Height of stand positions center of KC50 display around 16 in. (410mm) ►Stand can be further lengthened by adding Riser Box or Printer Box. ►Base of stand measures approx. 10.25 x 10.25 in. (258 x 258 mm). |
  |
| 3PTY-SC-2000-CF2-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Countertop Height Base, Back-to-Back Monitor |
►Stand allows mounting of one KC50 and one TD50 monitor for dual-screen facing applications. ►Height of stand positions center of primary display around 16 in. (410mm) and center of secondary display around 14 in. (352 mm). ►Stand can be further lengthened by adding Riser Box or Printer Box. ►Base of stand measures approx. 10.25 x 10.25 in. (258 x 258 mm). |
  |
| 3PTY-SC-2000-PB1-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Pedestal Base, Single Monitor |
►Stand allows mounting of one KC50 for single-screen facing applications. ►Height of stand positions center of KC50 display around 41.25 in. (1047 mm). ►Stand can be further lengthened by adding Riser Box or Printer Box. This is typically done to create a floor to eye level walk-up kiosk solution. ►Base of stand measures 15 x 16 in. (381 x 406 mm). |
  |
| 3PTY-SC-2000-PB2-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand, Pedestal Base, Back-to-Back Monitor |
►Stand allows mounting of one KC50 and one TD50 monitor for dual-screen facing applications. ►Height of stand positions center of primary display around 41.25 in. (1047 mm) and center of secondary display around 40 in. (1013 mm). ►Stand can be further lengthened by adding Riser Box or Printer Box. This is typically done to create a floor to eye level walk-up kiosk solution. ►Base of stand measures 15 x 16 in. (381 x 406 mm). |
  |
Havis Riser Options for Stands
| Lambar Sashe | Hoto | Bayani | Bayanan kula | Abubuwan da ake buƙata |
| 3PTY-SC-2000-R1-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand Riser | ►Riser extends the height of Kiosk Stands with Countertop Base or Pedestal Base. ►Adds additional 10.6 in (269 mm) height. |
  |
| 3PTY-SC-2000-PE-02
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Printer Enclosure | ►Enclosure extends the height of Kiosk Stands with Countertop Base or Pedestal Base. ►Adds additional 10.6 in (269 mm) height. ►Compatible with Epson T-88VII receipt printer with additional printer models being validated. ►Door with magnetic latch provides convenient access to printer for paper reloading or maintenance. |
  |
Additional Havis Stand Accessories
| Lambar Sashe | Hoto | Bayani | Bayanan kula | Abubuwan da ake buƙata |
| 3PTY-SC-2000-PA-01
NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service. |
 |
Havis Kiosk Stand Payment Mounting Bracket | ►Allows payment devices to mounted to side of kiosk. ►Payment device holder (i.e. bucket) may need to be ordered separately from Havis website. |
Power Cords/ Power Supplies
Note: There are two ways to power the KC50, either AC power or via 802.3at/802.3bt PoE (Power over Ethernet). POE requires Premium KC50 config.
AC Power Supply options
| Lambar Sashe | Hoto | Bayani | Bayanan kula | Abubuwan da ake buƙata |
| Saukewa: PWR-BGA24V78W4WW |  |
Tushen wutan lantarki | ►100-240V AC input, 24V 3.25A, 78W DC output | AC Line Cord (23844-00-00R ko ƙayyadaddun sigar ƙasa) |
| Saukewa: 23844-00-00R |  |
AC Layin Igiyar | ►This AC Line Cord is for use in North America. See the AC Line Cords by Country TAG don kwatankwacin igiyoyin layi don amfani da su a wasu ƙasashe. |
PoE (Power over Ethernet) Power Supply options
Premium config versions of the KC50 support Class 4, 6 and 8 POE power classes
TIP: To prevent any POE accessory power limitations use a Class 8 802.3bt power supply.
The power supplies listed below have been validated by Zebra Engineering to function with KC50
| Class Power | Power from PSE | Power delivered to PD | |
| Type 1802.3af | Darasi na 1 | 4W | 3.84 W |
| Darasi na 2 | 7W | 6.49 W | |
| Darasi na 3 | 15.4 W | 13 W | |
| Type 2 802.3at | Darasi na 4 | 30 W | 25.5 W |
| Type 3 802.3bt | Darasi na 5 | 45 W | 40 W |
| Darasi na 6 | 60 W | 51 W | |
| Type 4 802.3bt | Darasi na 7 | 75 W | 62 W |
| Darasi na 8 | 90 W | 71.3 W |
| Lambar Sashe | Hoto | Bayani | Bayanan kula | Abubuwan da ake buƙata |
| Saukewa: PD-9601GC
(Kungiyoyi 3)* |
 |
Microchip 90W PoE Power Supply | ►Used to power KC50 via Power over Ethernet (PoE). ►Provides 90W output (802.3bt Class 8) |
|
| PD-9501GC/SP
(Kungiyoyi 3)* |
 |
Microchip 60W PoE Power Supply | ►Used to power KC50 via Power over Ethernet (PoE). ►Provides 60W output (802.3bt Class 6) ►Includes surge suppression |
|
| PD-9001GR/SP
(Kungiyoyi 3)* |
 |
Microchip 30W PoE Power Supply | ►Used to power KC50 via Power over Ethernet (PoE). ►Provides 30W output (802.3at Class 4) ►Includes surge suppression |
KC50 TAG
Sirrin Zebra. Don amfanin ciki na mai karɓa kawai
Kwanan Sabunta Takardu: 10/2/24
NOTE: Items highlighted in grey may not be orderable/available
Takardu / Albarkatu
 |
ZEBRA KC50 Android Kiosk Computer [pdf] Jagorar mai amfani CBL-TC5X-USBC2A-01, CBL-TC2X-USBC-01, ZFLX-SCNR-E00, ZFLX-LTBAR-200, TD50-15F00, KT-MC18-CKEY-20, 3PTY-SC-2000-CF1-01, KC50 Android Kiosk Computer, KC50, Android Kiosk Computer, Kiosk Computer, Computer |
