Tow-Trust Towbars
Important: Please read General Notes overleaf before fitting [wrench]
Issue 2
TV360SN VAUXHALL ANTARA 2007>
Parts List
| Item | Qty | Description | Item | Qty | Description |
|---|---|---|---|---|---|
| A | 1 | Crossmember | F | 2 | M12 x 110 Grade 10.9 Bolts & Nyloc Nuts |
| B | 1 | ACS5 / 9205 Swan Neck | G | 2 | 15mm Spacer Plates |
| C | 2 | Handed Side Arms | H | 12 | M12 x 40 Bolts & S/P Washers |
| D | 1 | VASP8 L/H Socket Plate | J | 4 | 12 x 25 Flat Washers |
| K | 4 | 12 x 40 Flat Washers | |||
| L | 8 | 12 x 30 Flat Washers |
Installation Steps
- Remove the Towing eye from the left hand chassis member (This is not refitted with the Towbar assembly).
- Locate all Towbar mounting points and clear off any mastic / under seal. (If necessary tap out to clean threads).
- Using item H with item L loosely bolt items C to all mounting points on each correct chassis member.
- Using item H with item K bolt item A to the underside of each side arm (items C).
- Using item F with item J and item G bolt item D and item B to item A.
- Fully tighten all nuts and bolts ensuring Towbar is rigid and secure.
Diagram Description
The diagram illustrates the assembly of the Tow-Trust TV360SN towbar for the Vauxhall Antara. It shows an exploded view of the main components, including the crossmember (A), swan neck (B), side arms (C), and socket plate (D). Various bolts (H, F) and washers (J, K, L) are depicted, along with spacer plates (G), indicating their connection points to the vehicle chassis and the towbar structure. The diagram guides the user on how to attach the towbar parts using the provided hardware.
Notes
- Recommended Torque Setting for M12 Grade 10.9 -139 Nm. (For other Torque Settings see notes overleaf.)
- Nose load limits and vehicle manufacturer's trailer / caravan weight limits must be observed.
