Instruction Manual

Thank You

Thank you for purchasing this product. To achieve the perfect hidden-line effect, we use severely thin aviation-grade wire with high tension and pressure tolerance. However, due to its thin nature, be careful not to cut through it as it might be susceptible to shearing during installation. Always be careful not to press brick pieces down on the wire.

Let's Get Started

If you face any challenges, please feel free to reach out via support@gameofbricks.eu. Please note that we offer 2 years of free light kit maintenance.

Step 1 (Bag 1)

Step 1: Preparation

The first step involves preparing the components from Bag 1. This includes a classic version of the light kit components, which are typically thin wires with LED lights attached.

Installation Details:

• The images show the initial assembly of the LEGO set, including the Quinjet and the Ant-Man figure.
• Thin wires are shown being carefully routed through specific LEGO bricks.
• A close-up shows a small LED light being inserted into a LEGO brick, with the wire carefully positioned.
• The process involves attaching lights to various parts of the Quinjet, such as the cockpit and wings.
• The images demonstrate routing wires through internal structures to maintain a clean aesthetic.
• Attention is given to securing wires without pinching them, especially when closing LEGO assemblies.
• Specific instructions are provided for attaching lights to the base structure and the Ant-Man figure's accessories.
• The 'same installing method for both side' is indicated for symmetrical parts of the model.

Step 2 (Bag 2)

Step 2: Adding Lights to Characters and Effects

This step focuses on integrating lights into the character figures and special effect elements, such as the energy blasts.

Installation Details:

• Bag 2 contains components for character lighting and effects.
• The images show the Ant-Man and the Wasp figures being fitted with small LED lights.
• The blue energy blast effects are shown with integrated lights.
• Wires are carefully fed through the figures and effects to connect to the main wiring harness.
• Specific attention is paid to the placement of lights to enhance the visual impact of the characters and their abilities.

Step 3 (Bag 3)

Step 3: Illuminating the Hangar and Base

This stage involves adding lights to the main structure, including the hangar and the surrounding base elements.

Installation Details:

• Bag 3 contains LED strips and wires for illuminating larger sections of the model.
• The images show LED strips being attached to the tower structures and the main hangar building.
• Wires are routed along the base of the model, often concealed within the brickwork.
• Close-ups illustrate the connection of wires to specific LEGO elements, ensuring secure placement.
• The 'same installing method for both side' is mentioned for symmetrical lighting installations.
• Particular focus is placed on lighting up the interior and exterior details of the hangar.

Step 4 (Bag 4)

Step 4: Finalizing Character and Vehicle Lighting

This step completes the lighting for the remaining characters and any additional vehicle components.

Installation Details:

• Bag 4 includes components for additional character details and possibly secondary vehicles or accessories.
• The images show the final placement of lights on figures like Captain America and Iron Man (if applicable to the set).
• Wires are meticulously routed to connect these components to the power source.
• The 'same installing method for both side' is reiterated for any mirrored components.
• Detailed close-ups show the precise insertion of LEDs and the management of wires.
• The images guide the user in connecting lights to the legs and arms of the figures, as well as any handheld accessories.

Step 5

Step 5: Connecting Power and Completion

The final step involves connecting the entire light kit to the power source and ensuring all connections are secure.

Installation Details:

• This step shows the USB power cable and the main connector block.
• The images illustrate connecting the main wiring harness to the USB power adapter.
• The final assembled model with all lights illuminated is shown, confirming successful installation.
• Important Note: If you choose to use a power source other than the provided battery box, ensure the maximum voltage does not exceed 6V.