INSTRUCTION MANUAL
Light Kit for Ferrari F40 10248
[Game of Bricks Logo]
Thank You
For purchasing this product. To give you the perfect hidden-line effect, we use severely thin aviation-grade wire with high tension and pressure tolerance. However, due to its thin nature, be careful not to cut through it as it might be susceptible to shearing during installation. Always be careful not to press brick pieces down on the wire.
Let's Get Started
If you face any challenges, please feel free to reach out via support@gameofbricks.eu. Please note that we offer 2 years of free light kit maintenance.
Step 1: Front Lighting Installation
This step details the installation of LED lights and the routing of wires for the front section of the Ferrari F40 model.
Components: 15cm Bit Light (White), 15cm Bit Light (Warm White).
Procedure:
- Prepare and insert small LED lights (white and warm white) into designated brick locations within the front compartment of the LEGO model.
- Carefully route the thin wires through the model's structure, ensuring they are not pinched or damaged.
- Install components around the windshield area, managing wires to maintain a clean look.
- Connect various LED strips and wires to the front assembly, preparing for the final connection.
- The final images for this step show the front of the model with the headlights illuminated.
Step 2: Rear Lighting Installation
This step focuses on installing LED strip lights for the rear lights of the Ferrari F40 model.
Components: Red Strip Lights, Warm White Strip Lights.
Procedure:
- Prepare the red and warm white LED strip lights.
- Insert the LED strip lights into the rear section of the model, specifically around the tail light areas.
- Carefully route the wires through the rear chassis and connect them to the respective light assemblies.
- The final images for this step show the rear of the model with the tail lights illuminated.
Final Connection
Connect the light kit to the battery box. Installation is now complete. If using an alternative power source, ensure its maximum voltage does not exceed 6V.