Game of Bricks Light Kit for Winter Village Bakery 10216

Thank You

Thank you for purchasing this product. Game of Bricks uses thin aviation-grade wire for a hidden-line effect, offering high tension and pressure tolerance. Due to its thin nature, please be careful not to cut through it, as it may be susceptible to shearing during installation. Always ensure brick pieces are not pressed down directly onto the wire.

Let's Get Started

If you encounter any challenges, please feel free to reach out via support@gameofbricks.eu. Game of Bricks offers 2 years of free light kit maintenance.

Step 1 (Bag 1)

The first step involves unpacking Bag 1, which contains initial LED lights and wiring. The process begins by integrating these components into the main structure of the Winter Village Bakery. Wires are carefully routed through pre-existing gaps or channels within the LEGO bricks to ensure they remain hidden. LED lights are then positioned in specific locations, such as the front windows, to illuminate the interior. Subsequent images show the assembly of the building's walls and roof, with wires being managed to avoid obstruction by new brick placements.

Step 2 (Bag 2)

Bag 2 contains further lighting elements. This step focuses on adding lights to the exterior of the bakery, potentially for decorative lamps or accent lighting. Wires are routed along the exterior surfaces or through small openings. The assembly continues, with new brick layers being added over the concealed wires. Attention is paid to connecting these new lights to the main wiring harness.

Step 3 (Bag 3)

With Bag 3, the installation progresses to more detailed lighting placements. Wires are guided towards specific features, possibly including the roofline or side facades. The images demonstrate connecting these wires to existing LEDs or preparing them for future connections. Careful placement of bricks is crucial to secure the wires and maintain the model's integrity.

Step 4 (Bag 4)

Bag 4 provides components for additional lighting, likely for external accessories. This step involves assembling smaller elements, such as a street lamp or a cart, and integrating their respective LED lights and wires. The wires from these accessories are then routed back to connect with the main power distribution. The images show the assembly of these external features and the careful management of their associated wiring.

Step 5 (Bag 5)

The final set of components comes from Bag 5. This step typically involves lighting a separate, connected scene, such as an icy pond or a small market stall. The components are assembled, and LED lights are placed within this scene. Wires are routed from this separate area to join the main wiring system. The images illustrate the assembly of the scene and the integration of its lighting elements, followed by connecting these to the overall light kit.

Final Connection

Connect the assembled light kit wiring harness to the battery box. Once connected, the installation is complete. If using an alternative power source, ensure its maximum voltage does not exceed 6V.