Introduction
Please read this instruction manual carefully before attempting to install.
Important Information & Safety Warnings
Installation Requirements: ??? We recommend 1 or more people to install.
Assembly Time: ⏱️ The expected assembly time is 1 hour.
Safety: ?? Not intended for use by children.
Safety: ?❌ Keep away from fire or other heat sources.
Recommendation: ?✔️ We recommend wearing protective gloves.
Assembly Tip: ⚠️ Please follow the instruction manuals and use a pad to avoid damage during assembly.
Incorrect Handling: A person is shown holding a tool, with a trash can nearby, and a box. The product box is open, and another figure looks unhappy. This indicates an incorrect approach.
Correct Handling: A person is shown holding a tool, with the product box open. The product is placed on a protective pad on the floor, and another figure looks happy. This indicates the correct approach.
Parts List
| Part | Description | Quantity |
|---|---|---|
| ① | Back Panel | x1 |
| ② | Left Side Panel | x1 |
| ③ | Seat Base | x1 |
| ④ | Back Cushion Support | x1 |
| ⑤ | Left Front Leg | x1 |
| ⑥ | Right Front Leg | x1 |
| ⑦ | Left Armrest | x1 |
| ⑧ | Right Armrest | x1 |
| A | Bolt | x14 |
| B | Washer | x14 |
| C | Allen Key | x1 |
| D | Washer/Nut | x14 |
Assembly Instructions
General Tightening Note: ⚠️ Half tighten screws initially. ⚠️ Fully tighten all screws only after assembly is complete.
Step 1
Attach the Seat Base (3) and Left Front Leg (5) and Left Armrest (7) to the Back Panel (1). Use Bolts (A) with Washers (B) and Washers/Nuts (D). Ensure parts are aligned correctly as shown in the diagram.
Diagram Description: Shows part (1) with holes. Legs (5) and armrest (7) are being attached to it using bolts (A), washers (B), and nuts (D). Arrows indicate the direction of attachment. A warning icon shows half-tightening screws with a checkmark for correct and a cross for incorrect.
Step 2
Attach the Right Front Leg (6) and Right Armrest (8) to the Seat Base (3) and Left Side Panel (2). Use Bolts (A) with Washers (B) and Washers/Nuts (D). Ensure parts are aligned correctly as shown in the diagram.
Diagram Description: Shows part (3) and (2) with holes. Legs (6) and armrest (8) are being attached using bolts (A), washers (B), and nuts (D). Arrows indicate attachment direction. A warning icon shows half-tightening screws with a checkmark for correct and a cross for incorrect.
Step 3
Attach the Back Cushion Support (4) to the assembled structure, aligning it with the designated points on parts (2) and (3). An arrow indicates the downward direction of attachment.
Diagram Description: Shows the main chair frame. Part (4) is being lowered into place onto the top of the chair structure.
Step 4
The armchair is now fully assembled.
Diagram Description: Shows the completed armchair.
Care Instructions
Upholstered Furniture Care
If the product becomes stained, use a specific upholstery cleaner sprayed onto the stain. Gently wipe with a soft towel. Avoid scrubbing vigorously to prevent pilling.
General Product Care
- Use a soft, clean cloth or sponge to gently wipe the outer surface to remove dust and dirt.
- Avoid using chemical cleaners or harsh solvents to prevent damage to the appearance.
- Inspect fittings (bolts, screws, nuts, etc.) every 3 months and re-tighten them every 6 months.
- Avoid direct sunlight.
If the product shows structural damage or poses a safety hazard, stop using it until it is repaired.
Customer Support & Contact
If you are not entirely satisfied with your purchase, please follow these steps:
- Go to Your Orders.
- Find your order in the list.
- Select Problem with order.
- Choose your topic from the list displayed.
- Select Contact seller.
US Contact:
YAHEE TECHNOLOGIES CORP
Address: 1532 S VINEYARD AVE ONTARIO CA 91761
UK Contact:
Monumart Limited
Address: Europa House, Europa Way, IP15DL, Ipswich.
Additional Information
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.
Manufacturer:
Made in PRC for Yahee GmbH
Yahee GmbH
Höpfigheimer Straße 11, 74321 Bietigheim-Bissingen
E-Mail: info@yaheetech.shop
