Safavieh PAT7092 3-Seater Outdoor Bench
Model: PAT7092
Product Dimensions: 76.38" W x 29.52" D x 25.0" H
Notice
- Please make sure that you have all parts indicated and they are in good condition before you begin assembly of this item. Refer to the part list and hardware list below for guidance.
- This item should be assembled on a soft surface to prevent scratching the finish during assembly.
- This item may require periodic tightening.
- If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com.
Preparation
- Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 10 minutes.
- Tools Required for Assembly (included): Allen Key
Part List and Hardware List
| Piece | Description | Quantity | Piece | Description | Quantity |
|---|---|---|---|---|---|
| A | Left Leg Panel | 1X | CSH1 | Left Seat Cushion | 1X |
| B | Left Backrest Panel | 1X | CSH2 | Middle Seat cushion | 1X |
| C | Left Support Bar | 1X | CSH3 | Right Seat Cushion | 1X |
| D | Left Middle Leg Panel | 1X | CSH4 | Back Cushion | 3X |
| E | Right Leg Panel | 1X | HW1 | Allen Bolt: M6x0.5x30 mm | 8X |
| F | Right Backrest Panel | 1X | HW2 | Insert Nut | 10X |
| G | Right Support Bar | 1X | HW3 | Allen Bolt: M6x0.5x45 mm | 8X |
| H | Right Middle Leg Panel | 1X | HW4 | Screws M6x0.5x60 mm | 4X |
| I | Left Seat Panel | 1X | HW5 | Allen Bolt: M6x0.5x100 mm | 2X |
| J | Right Seat Panel | 1X | HW6 | Screws M6x0.5x35 mm | 4X |
| HW7 | Screws M6x0.5x45 mm | 4X | |||
| HW8 | Allen key | 2X |
Assembly Instructions
- Step 1: Attach the Left Backrest Panel (B) to the Left Leg Panel (A) using Bolts (HW1), Insert Nuts (HW2), and the Allen Key (HW8).
- Step 2: Attach the Left Support Bar (C) to the Left Leg Panel (A) using Bolts (HW3) and the Allen Key (HW8).
- Step 3.1: Attach the Left Middle Leg Panel (D) to the Left Backrest Panel (B) using Screws (HW4) and the Allen Key (HW8).
- Step 3.2: Attach the Left Middle Leg Panel (D) to the Left Support Bar (C) using Bolts (HW3) and the Allen Key (HW8).
- Step 4: Attach the Right Backrest Panel (F) to the Right Leg Panel (E) using Bolts (HW1), Insert Nuts (HW2), and the Allen Key (HW8).
- Step 5: Attach the Right Support Bar (G) to the Right Leg Panel (E) using Bolts (HW3) and the Allen Key (HW8).
- Step 6.1: Attach the Right Middle Leg Panel (H) to the Right Backrest Panel (F) using Screws (HW4) and the Allen Key (HW8).
- Step 6.2: Attach the Right Middle Leg Panel (H) to the Right Support Bar (G) using Bolts (HW3) and the Allen Key (HW8).
- Step 7 & 8: Connect the assembled left side frame to the assembled right side frame. Use Bolts (HW5) and Insert Nuts (HW2) secured with the Allen Key (HW8) for one connection point (Step 8.1), and Bolts (HW1) and Insert Nuts (HW2) secured with the Allen Key (HW8) for another connection point (Step 8.2).
- Step 9: Attach the Seat Panels (I) and (J) to the frame using Screws (HW6), Screws (HW7), and the Allen Key (HW8). Note: Insert Screws (HW7) from the inside to the outside of the Seat Panels (I) and (J).
- Step 10: Turn the assembled 3-seater bench upright.
- Step 11: Place the Right Seat Cushion (CSH3), Middle Seat Cushion (CSH2), Left Seat Cushion (CSH1), and the Back Cushions (CSH4) onto the bench.
- Step 12: Your bench is ready to be used.
Care and Maintenance
Outdoor Furniture Care
Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with a small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
Upholstery Care
To prevent overall soiling, frequent vacuuming or light brushing is recommended. Cushions and pillows should be turned on a weekly basis. Down-filled cushions should be brushed rather than vacuumed. Spot clean, using a mild water-free solvent or dry cleaning product. Only a professional cleaner should undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining.
