Care and Maintenance
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with a small brush or vacuum.
Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
Notice
- Please make sure that you have all parts indicated before you begin assembly of this item.
- This item should be assembled on a soft surface to prevent scratching the finish during assembly.
- This item may require periodic tightening.
Part List and Hardware List
| PIECE | DESCRIPTION | PICTURE | QUANTITY |
|---|---|---|---|
| A | Frame leg | [Leg piece] | 2X |
| B | Top Frame table | [Flat table top piece] | 1X |
| C | Cross bar | [Cross-shaped support piece] | 2X |
| D | Cross bar | [Cross-shaped support piece] | 1X |
| E | Screw -1 (6x60mm) | [Screw] | 12X |
| H | Allen key | [L-shaped tool] | 1X |
Preparation
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key.
Assembly Steps
Step 1
Attach top frame (A) to (C),(D), use Allen key (H) to tighten screws (E).
[Diagram: Two frame legs (A) are connected by cross bars (C, D) and secured with screws (E) using an Allen key (H).]
Step 2
Attach (A), (C),(D) to (B), use Allen key (H) to tighten screws (E).
[Diagram: The assembled base structure is attached to the top frame table (B) using screws (E) and the Allen key (H).]
Step 3
Complete.
[Diagram: The fully assembled outdoor bench.]
