Safavieh Outdoor
Model# PAT7008
Outdoor Bench Assembly and Care Guide
Product Dimensions: 46.85" W x 26.38" D x 32.38" H
Care and Maintenance
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with a small brush or vacuum.
Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
Notice
- Please make sure that you have all parts indicated before you begin assembly of this item.
- This item should be assembled on a soft surface to prevent scratching the finish during assembly.
- This item may require periodic tightening.
Part List and Hardware List
| PIECE | DESCRIPTION | PICTURE | QUANTITY |
|---|---|---|---|
| A | Leg Frame | [Diagram of a leg frame] | 2X |
| B | Seat Frame | [Diagram of a seat frame] | 1X |
| C | Back frame | [Diagram of a back frame] | 1X |
| D | Screw -1 6x80mm | [Diagram of a screw (6x80mm)] | 2X |
| E | Screw -1 6x60mm | [Diagram of a screw (6x60mm)] | 8X |
| H1 | Allen key | [Diagram of an Allen key] | 1X |
Preparation
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
Assembly Steps
Step 1
Attach leg frame (A) to back frame (C), use screws-1 (D), tighten with allen key (H1). Use screw -1 (E) to connect leg frame (A) with seat frame (B), tighten with allen key (H1).
Step 2
Tighten screw-1 (E) with allen key (H1) to attach seat frame (B) and back frame (C).
