Safavieh PAT7008 Outdoor Chair Assembly Instructions
Model #: PAT7008
Product Dimensions: 23.2" W x 26.4" D x 32.5"H
Notice
Please ensure all parts are indicated and in good condition before beginning assembly. Refer to the part list and hardware list for guidance. This item should be assembled on a soft surface to prevent scratching the finish. Periodic tightening may be required. For assistance, contact the Customer Care team by emailing customersupport@safavieh.com.
Preparation
- Before beginning assembly, verify all parts are present by comparing them with the part contents list and hardware contents list.
- Do not attempt to assemble the product if any part is missing or damaged.
- Estimated Assembly Time: 10 minutes.
- Tools Required for Assembly (included): Allen Key.
Part List and Hardware List
Parts
| Piece | Description | Quantity |
|---|---|---|
| A | Leg Frame | 2X |
| B | Seat frame | 1X |
| C | Back Frame | 1X |
| CSH1 | Seat Cushion | 1X |
| CSH2 | Back Cushion | 1X |
Hardware
| Piece | Description | Quantity |
|---|---|---|
| HW1 | Screw: M6 x0.5 x80 mm | 2X |
| HW2 | Screw: M6 x0.5 x60 mm | 6X |
| HW3 | Allen key 4 | 1X |
Assembly Instructions
Step 1
Attach leg frame (A) to back frame (C) using screws (HW1) and tighten with the Allen key (HW3). Connect leg frame (A) with seat frame (B), tightening with the Allen key (HW3).
Step 2
Tighten screws (HW2) with the Allen key (HW3) to attach the back frame (C). Complete.
Step 3
Place Seat Cushion (CSH1) and Back Cushion (CSH2) on the chair. The chair is ready to be used.
Care and Maintenance
- Store outdoor furniture indoors or cover well when not in use.
- Dust regularly with a small brush or vacuum.
- Clean spills immediately before they harden or stain with a slightly damped sponge.
Important Warnings
⚠️ Weight Capacity: 220 lbs
⚠️ Warning: Do not stand on chair.
⚠️ Warning: Do not over torque bolts / screws.
