Hulala Home NSCL1244 Nightstand

Thank You For Choosing Our Furniture

If you have any questions or concerns, please do not hesitate to reach out to us.

Call us: +1(833)324-2464

Email: AMZCustomerservice@hulalahome.com

NOTE: This brochure contains IMPORTANT safety info. Please read and keep it for future reference.

Maintenance and Warning

1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
2. Carefully check that you have all the parts before beginning assembly.
3. Keep fittings out of children's reach and keep children well away from construction area.
4. We suggest you retain these instructions for future reference.
5. Keep furniture away from heat sources.
6. Do not clean furniture with harsh cleaner or polishes.
7. Do not use detergents, solvents, abrasives, spray packs, or leather cleaner.
8. Use non-color mild soap with warm water to clean spills (Mix 1:11 soap to water).
9. Do not place furniture under direct sunlight; material will possibly fade over time.
10. Do not use on-site dry cleaning machines.
11. Children should not climb or jump on the furniture.
12. Do not write on furniture that is not protected by a padded barrier.
13. Not for commercial use, only for residential use.

Exploded Diagram

The main unit is labeled 'A'. The four legs are labeled 'B'.

Tools needed: Screwdriver (not pictured, but implied by assembly steps), Hammer (not pictured, but implied by assembly steps).

Assembly time: Around 30 min

People required: Two persons

Parts List

• Part A: Main unit (x1)
• Part B: Legs (x4)

Hardware List

• Hardware #1: Bag of screws and other small parts (x2)
• Hardware #2: Screws (x16)

Tool List

• Tool #3: Screwdriver (x1)
• Tool #4: Allen wrench (x1)

Hardware Spare List

• Hardware #2: Screws (x1)

Assembly Instructions

Step 1

Attach the legs (B) to the main unit (A) using screws (#2) and the Allen wrench (#4). Ensure 16 screws (#2) are used in total for this step.

Step 2

The nightstand is now assembled with its legs attached.

Step 3

Use screws (#2) to attach bracket (1) to the top panel (A). Tighten the screws (#2) with the screwdriver (#3). Two brackets (1) are used, each secured by two screws (#2). A total of 4 screws (#2) are used in this step.

Step 4

Wall Mounting Instructions:

1. Mark the position on the wall corresponding to the location of bracket (1) on panel A. Drill and insert the expandable screw (4) using a hammer. (Note: Expandable screws and hammer are not provided).
2. Assemble bracket (1) to the wall. Align the hole in bracket (1) with the expandable screw (4). Use screw (3) to attach it, tightening screw (3) with screwdriver (#3). Two brackets (1) are used, each secured by two screws (3). A total of 4 screws (3) are used in this step.

Step 5

Let the plastic belt (5) pass through bracket (1) and pull tightly. Two plastic belts (5) are used, each passing through a bracket (1).

Warranty

1. Hulala Home strives to offer high-quality products and to satisfy each customer with product or service as needed.
2. A 30-day warranty is provided starting from the time the item is received. Each customer must provide a record of their order, such as the order number or item receipt. Items out of the warranty period may still be eligible for support.
3. Replacement parts can be purchased from Hulala Home if they are available.

Are you having difficulty with assembly or missing parts? Please send an email with your order number to AMZCustomerservice@hulalahome.com.

For returns, please check the return policy with the retailer or marketplace where the product was purchased.

Thank you for your purchase. Enjoy your new furniture piece!