ITEM NO. ZBEXH0473 Bench
Thank you for purchasing the Bench. Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation of this product. At HULALA home, we are committed to making great products possible. From our in-house Design Team to our Buyers, we work together to bring great designs to life. Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety, and quality of the products we sell. We are all committed to designing and developing products to the highest industry standards. We hope you are happy with your product and welcome any feedback or comments you may have.
Parts List
Diagram description: A line drawing shows the components for the bench.
| Part | Description | Quantity |
|---|---|---|
| A | Seat | x1 |
| B | Side Leg | x2 |
Part A is depicted as a segmented seat cushion. Part B is shown as a U-shaped leg structure.
Hardware List
Diagram description: Line drawings illustrate the hardware components.
| Item | Description | Quantity |
|---|---|---|
| 1 | Bolt M8*50mm | x8 |
| 2 | Spring Washer | x8 |
| 3 | Flat Washer | x8 |
| 4 | Allen Key | x1 |
| 5 | Felt Mat | x4 |
The hardware includes bolts, washers (spring and flat), an Allen key for tightening, and felt mats for the base of the legs.
Spare List
Diagram description: Line drawings show individual spare parts.
| Item | Description | Quantity |
|---|---|---|
| 1 | Bolt M8*50mm | x1 |
| 2 | Spring Washer | x1 |
| 3 | Flat Washer | x1 |
| 5 | Felt Mat | x1 |
Spare parts include one bolt, one spring washer, one flat washer, and one felt mat.
Note: Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment.
Assembly Instructions
STEP 1
Attach the Side Legs (B) to the Seat (A). Use eight (8) Bolts (1), eight (8) Spring Washers (2), and eight (8) Flat Washers (3). Insert the bolts through the designated holes in the seat and legs, securing them with washers. Use the Allen Key (4) to tighten the bolts. The diagram illustrates the alignment of parts and the tightening process. Note: Fully tighten the bolts in sequence after all bolts are properly connected.
Diagram description for Step 1: Shows the Seat (A) and Side Legs (B). It illustrates inserting Bolts (1) with Spring Washers (2) and Flat Washers (3) through holes, and using the Allen Key (4) to tighten them. A carton is shown in the background.
STEP 2
Connect the two main sections of the Seat (A) together. Ensure the Side Legs (B) are correctly positioned on each side. The diagram shows the two halves of the seat being joined.
Diagram description for Step 2: Shows the two halves of the Seat (A) being brought together, with the Side Legs (B) already attached to each half.
STEP 3
Attach the Felt Mats (5) to the bottom of each Side Leg (B). Use four (4) Felt Mats in total. A magnified view shows the mat being applied to the base of the leg.
Diagram description for Step 3: Shows the bench from the side and bottom. Four Felt Mats (5) are indicated to be attached to the base of the Side Legs (B). A close-up view shows a Felt Mat.
STEP 4
The assembly is now complete. The final diagram shows the fully assembled ZBEXH0473 Bench.
Diagram description for Step 4: Shows the completed bench, standing upright.
MAINTENANCE AND WARNING
- Keep furniture away from heat.
- Do not clean furniture with harsh cleansers or polish. Do not use detergents, solvents, abrasives, spray packs, or leather cleaner. Use non-colored mild soap with warm water for cleaning spills (Mix 1:10 soap to water).
- Do not place furniture under direct sunlight, as the material may fade over time.
- Do not use on-site dry cleaning machines.
- Children should not climb or jump on the furniture.
- Do not write on furniture without a padded barrier to protect the surface.
- Not for commercial use; for residential use only.
- The maximum load is 400 LBS.
⚠️ Warning: Please adhere to these maintenance and safety guidelines.
WARRANTY
HULALA home strives to offer high-quality products and aims to satisfy each customer with product or service as needed. A 30-day warranty is provided starting from the time the item is received. Each customer must provide a record of their order, such as the order number or item receipt. For items out of the warranty period, replacement parts may still be available for purchase from HULALA home.
For assembly difficulties or missing parts, please send an email with your order number to customerservice@hulalahome.com.
For returns, please check the return policy with the retailer or marketplace where the item was purchased. Thank you for your purchase. We hope our furniture piece enhances your life!
