Cudy 4G LTE Router Quick Installation Guide

Quick Installation

Step 1: Install Antennas

Install the cellular antennas. Ensure they are securely attached to the router.

Diagram shows a Cudy router with two external cellular antennas being attached to the sides.

Step 2: Install SIM Card

Insert a nano SIM card into the SIM1 slot with the gold contacts facing down until you hear a click. The router does not support SIM hot-swapping; ensure the router is powered off before inserting or removing the SIM card.

Diagram shows a nano SIM card being gently slid into the SIM1 slot on the router.

Note 1: Do not use SIM hot-swapping. Power off the router before inserting or removing the SIM card to prevent damage.

Note 2: If both SIM1 and SIM2 slots are used, the router will automatically select one. For first-time use, it's recommended to insert only one SIM card.

Step 3: Connect Power Adapter

Connect the provided power adapter to the router.

Diagram shows a power adapter being plugged into the router's power port.

Step 4: Power On the Router

Press the power button to turn on the router. Allow 2-5 minutes for the router to start up.

Diagram shows a finger pressing the power button on the router.

Step 5: Check LED Status

Observe the LED indicators. When the LED turns solid blue or purple, the router is connected to the cellular network. If the LED turns solid red, it indicates a potential issue that may require router customization.

Note: For some ISP SIM cards (e.g., Verizon), it may take an additional 2-5 minutes to establish an internet connection.

Customize the Router

Access the router's web management interface to configure settings.

Step 1: Connect to the Router

Connect your computer to the Cudy router via an Ethernet cable or Wi-Fi. The network name (SSID) and password are printed on the bottom of the router.

Image displays Wi-Fi network name (Cudy-XXXX, Cudy-XXXX-5G) and password (XXXXXXXX) details typically found on a router label.

Step 2: Launch Web Browser

Open a web browser and enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Log in using 'admin' as the password.

Screenshot of the Cudy router login page, showing fields for username (default 'admin') and password.

Step 3: Enter SIM PIN (If Required)

If your SIM card is locked with a PIN, a prompt will appear. Enter your PIN and click 'Save & Apply'. Wait approximately 15 seconds for the connection to establish.

Screenshot of the router's interface prompting for a SIM card PIN entry with 'Save & Apply' button.

Step 4: Verify Cellular Status

Check the cellular information on the status page. A 'Connected' status indicates a successful internet connection.

Screenshot of the router's status page displaying network connection details, including cellular status ('Connected' or 'Not connected') and data usage.

Step 5: Quick Setup or Further Configuration

If the internet is not connected, or if you wish to customize the router further, click 'Quick Setup' and follow the on-screen instructions.

Notes:

• If unsure about APN parameters, contact your internet provider.
• For other issues, contact Cudy technical support at support@cudy.com.
• Visit https://www.cudy.com/faq for frequently asked questions.

Enjoy your internet connection!

LED and Button Status

Understanding the status indicators for your Cudy router:

Note on LED Colors:

• Purple/Blue Solid: Connected to cellular network.
• Red Solid: Indicates a potential issue, refer to router customization guide.
• Purple/Blue Blinking: System startup or upgrade in progress.
• Wi-Fi LEDs: Indicate Wi-Fi status (enabled/disabled/pairing).
• LAN LED: Indicates network connection status (no connection, internet connection, 2G/3G/4G, 5G).

How to Upgrade Firmware

1. Download the latest firmware from https://www.cudy.com/download.
2. Unzip the downloaded firmware file.
3. Connect your computer to the Cudy router via Wi-Fi or Ethernet.
4. Open a web browser and navigate to http://cudy.net/ or http://192.168.10.1/.
5. Log into the web management page.
6. Navigate to 'Advanced Settings' > 'Firmware'.
7. Choose the unzipped firmware file to upload.
8. Wait 2-5 minutes for the router to restart and complete the upgrade.
9. The process is now complete.

Screenshot of the router's firmware upgrade interface, showing options to browse and upload firmware files, and a list of connected mesh units with firmware versions.

Need Help?

Common Questions:

1. Q: What should I do if I cannot access the web management page?
   A:
   • If your computer has a static IP address, change its settings to obtain an IP address automatically.
   • Ensure http://cudy.net/ or http://192.168.10.1/ is entered correctly in the web browser.
   • Try using a different web browser.
   • Reboot your router and try again.
   • Disable and then re-enable your active network adapter.
2. Q: How do I restore the router to its factory default settings?
   A:
   • With the router powered on, press and hold the RESET button for 6 seconds, then release it. Wait for the router to reset.
   • Alternatively, log into the web management page, go to 'Advanced Settings' > 'Reset', click 'Perform Reset', and wait for the process to complete.
3. Q: What can I do if I encounter other problems?
   A:
   • Find answers at https://www.cudy.com/faq.
   • Contact Cudy technical support via email: support@cudy.com.
   • Contact Cudy technical support via Skype: support@cudy.com.

Compliance Information

FCC Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WEEE Directive

According to the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU), this product must not be disposed of as normal household waste. Instead, it should be returned to the place of purchase or taken to a public collection point for recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health. For more information, please contact your local authority or the nearest collection point. Improper disposal of this type of waste may result in penalties according to national regulations.

EU Declaration of Conformity

Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.cudy.com/ce.