Get Connected with Your Cudy 4G LTE Router
This guide provides essential steps for a quick and easy setup of your Cudy LT500 4G LTE AC1200 Dual Band Wi-Fi Router. Follow these instructions to insert your SIM card, power up the device, and establish an internet connection.
Key Features and Setup Steps:
- SIM Card Insertion: Properly insert your Micro SIM card into the designated slot.
- Power Connection: Connect the power adapter and turn on the router. Allow approximately 2 minutes for the device to initialize.
- LED Status Indicators: Understand the meaning of the System LED colors (Blue for 4G/WAN connection, Purple for 2/3G, Red for no connection or issues).
- Router Customization: Connect to the router via Ethernet or Wi-Fi using the default network name and password found on the router's label. Access the management page at http://cudy.net/ or http://192.168.10.1/.
- PIN Code Entry: If your SIM card is PIN-locked, enter the PIN code when prompted during the initial setup.
- Troubleshooting: Refer to the guide for common issues and solutions, including accessing the management page and resetting the router to factory defaults.
For detailed information and support, please visit the Cudy website or contact their technical support team at support@cudy.com.
