Cudy LT500D AC1200 Wi-Fi Mesh 4G LTE Router Quick Installation Guide

Getting Started

This guide provides step-by-step instructions for setting up your Cudy 4G LTE router.

Step 1: Prepare Your Router

Install any detachable antennas on the router.

Insert your Nano SIM card into the SIM slot until you hear a clicking sound. Ensure the SIM card is correctly oriented.

Step 2: Connect Power

Connect the power adapter to the router and plug it into a power outlet. Wait for the system LED to turn solid, indicating the router is powered on.

Step 3: Check Network Connection Status

The system LED indicates the cellular network connection status:

• Solid Blue/Purple: Router is connected to the cellular network.
• Solid Red: Router is not connected to the cellular network. Continue to configure the router.

Step 4: Connect to the Router

Method A: Via Wi-Fi

On your device (computer, smartphone, tablet), find the Wi-Fi network named (SSID) and enter the Password printed on the bottom of the router.

Method B: Via Ethernet Cable

Turn off the Wi-Fi on your device. Connect your device to one of the router's LAN ports using an Ethernet cable.

Router Configuration

Step 5: Configure Your Router

Open a web browser on your connected device. Enter the router's default IP address or gateway (e.g., http://cudy.net/) in the address bar.

Follow the on-screen setup wizard. This typically involves:

• Login: Enter the admin username and password (default credentials are often found on the router's label).
• PIN Entry: If your SIM card is locked, you will be prompted to enter the PIN code. You have a limited number of attempts. Contact your mobile carrier for assistance if needed.
• Quick Setup: Configure essential settings such as Timezone, Cellular (APN Profile), and Wireless (2.4G SSID, 5G SSID, Password).
• Save & Apply: Confirm your settings.

Once configured, you can enjoy your internet connection.

LED Indicator Status Summary