SMÅGÖRA Shelving Unit
Assembly Instructions
⚠️ Important Safety Information
Children have died from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
The screw(s) and plug(s) supplied can be used with most solid and hollow walls. For solid wood use the screw(s) without plug(s). Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Parts Included
- 18x Dowels (Part #101345)
- 2x Cam locks (Part #103693)
- 4x Springs (Part #107716)
- 18x Screws (Part #118331)
- 18x Cam lock nuts (Part #119252)
- 4x Foot/Base protectors (Part #122628)
- 2x Wall bracket part 1 (Part #115753)
- 2x Wall bracket part 2 (Part #115754)
Assembly Steps
Step 1
Insert 16 screws (118331) into the pre-drilled holes of the main panels. Use a screwdriver ?.
Visual: Shows two long panels being laid flat, with hands inserting screws into holes. A close-up shows a screw being inserted into a panel.
Step 2
Attach side panels to the base panel using 8 dowels (101345) and screws. Insert dowels into the side panels, then attach them to the base. Use a screwdriver ?.
Visual: Shows the base panel and two side panels being assembled. Hands are shown inserting dowels and then securing panels with screws. A close-up shows dowels being inserted into holes.
Step 3
Insert 8 dowels (101345) into the side panels. Attach the internal shelf supports.
Visual: Shows hands inserting dowels into the side panels. Then, internal shelf supports are attached.
Step 4
Attach the back panels. Insert cam lock nuts (119252) into the designated holes on the side panels. Insert the cam lock screws into the back panels and then connect them. Rotate the cam locks (119252) with a screwdriver ? to secure the back panels.
Visual: Shows back panels being attached. A close-up shows a cam lock nut being inserted and then a cam lock screw being inserted and turned to secure.
Step 5
Slide the top panel into place, aligning it with the side panels. Push down firmly.
Visual: Shows the top panel being lowered onto the assembled structure with arrows indicating downward motion.
Step 6
Insert the shelves into the unit.
Visual: Shows a shelf being slid into one of the compartments.
Step 7
Secure the top panel by inserting cam lock nuts (119252) into the side panels and turning them to lock onto the cam lock screws from the top panel.
Visual: Shows cam lock nuts being inserted and turned to secure the top panel.
Step 8
Attach the foot protectors (122628) to the bottom corners of the unit. Use a hammer ? gently if needed.
Visual: Shows hands attaching rectangular foot protectors to the bottom of the unit. A close-up shows the attachment mechanism.
Step 9 (Wall Mounting Preparation)
Mandatory Wall Attachment: This furniture MUST be secured to the wall with the provided wall attachment device(s) to prevent tip-over accidents. Attach the wall brackets (115753 and 115754) to the top rear of the unit using screws (107716). Ensure the brackets are correctly oriented.
Visual: Shows the unit with wall brackets being attached to the top rear. A close-up shows the spring mechanism (107716) being used to attach the bracket.
Step 10 (Wall Mounting Hardware)
Mark the wall for the wall attachment points. Use a level ?. Drill holes and insert appropriate wall plugs (use plugs suitable for your wall type). Attach the wall mounting hardware (103693) to the wall.
Visual: Shows a level being used on the wall, then drilling, inserting plugs, and attaching wall mounting hardware. A close-up shows the cam lock mechanism for wall attachment.
Step 11 (Final Wall Attachment)
Lift the unit and hook the wall brackets (attached to the unit) onto the wall mounting hardware. Secure by turning the cam locks (103693) to lock the unit to the wall.
Visual: Shows the unit being lifted and attached to the wall hardware. A close-up shows the cam lock being turned to secure.
Step 12 (Safety Check)
Ensure the unit is securely attached to the wall. ⚠️ Failure to secure the furniture to the wall can result in serious injury or death from tip-over. Do not allow children to climb on the furniture.
Visual: Shows the assembled unit with a warning icon. A second diagram shows the unit tipping over, crossed out with a red X.
