VILTO Shelving Unit

Safety Warnings

• ⚠️ Children have died from furniture tipover. To reduce the risk of furniture tipover:
• Always install the provided anti-tip device.
• Never place a TV on this product.
• Never allow children to stand, climb, or hang on any drawers, doors, or shelves.
• Never open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

Parts List

• 8x Dowels (101350)
• 12x Screws (157436)
• 4x Bolts (157732)
• 1x Allen Key (100092)
• 4x Shelf Support Rails (121030)
• 1x Anti-Tip Bracket (157084)
• 1x Screw for Bracket (157433)
• 2x Washers for Bracket (157424)
• 2x Back Panels (implied)
• 4x Shelves (implied)
• 2x Side Panels (implied)

Assembly Instructions

Step 1: Assemble Frame Rails

Attach the first two shelf support rails (121030) to the inside of the two side panels using 2x screws (157436) and the Allen key (100092) for each rail. (Total 4 screws, 2 rails).

Step 2: Attach Remaining Frame Rails

Attach the next two shelf support rails (121030) to the side panels in the same manner. (Total 4 screws, 2 rails).

Step 3: Prepare Shelves

Insert 8 dowels (101350) into the pre-drilled holes on the ends of the four shelves.

Step 4: Insert Shelves

Carefully slide the shelves into the assembled frame, resting them on the support rails and aligning the dowels.

Step 5: Attach Back Panels

Slide the back panels into the grooves on the rear of the unit. Secure them using 4x screws (157436) and the Allen key (100092).

Step 6: Attach Feet

Screw the 4x bolts (157732) into the designated holes at the bottom of the unit.

Step 7: Level the Unit

Adjust the feet by screwing them in or out to ensure the unit is stable and level on the floor.

Step 8: Install Anti-Tip Device

Attach the bracket (157084) to the top rear of the shelving unit using 1x screw (157433) and 1x washer (157424). Secure the other end of the anti-tip strap to a wall stud using appropriate hardware (not included). Ensure the unit is securely fastened to the wall to prevent tipping. ⚠️