SMÅGÖRA Shelving Unit

Important Safety Information

¡ADVERTENCIA! Niños han muerto por vuelco de muebles. Para evitar que este mueble vuelque, debe usarse con el dispositivo de fijación a la pared suministrado. Los tornillos y tacos suministrados son adecuados para la mayoría de paredes sólidas y huecas. Use tornillos sin tacos en madera maciza. Use tornillos y tacos apropiados para sus paredes. En caso de duda, busque asesoramiento profesional. Lea y siga cuidadosamente cada paso de las instrucciones.

Parts Included

• 18x Dowels (Part No. 101345)
• 2x Feet (Part No. 122628)
• 4x Cam Lock Screws (Part No. 103693)
• 2x Cam Locks (Part No. 107716)
• 2x Brackets (Part No. 115753)
• 18x Screws (Part No. 118331)
• 18x Cam Lock Fittings (Part No. 119252)
• 4x Long Screws (Part No. 115754)
• 2x Caps/Covers (Part No. 110646)

Assembly Steps

1. Step 1: Prepare Base Panel

   Insert 16 screws (Part No. 118331) into the pre-drilled holes on the base panel.

2. Step 2: Attach Side Panels

   Insert 8 dowels (Part No. 101345) into the base panel. Attach the two side panels to the base using 8 cam lock screws (Part No. 118331) and 8 cam lock fittings (Part No. 119252).

3. Step 3: Attach Middle Shelf

   Insert 8 dowels (Part No. 101345) into the side panels. Attach the middle shelf using 8 cam lock screws (Part No. 118331) and 8 cam lock fittings (Part No. 119252).

4. Step 4: Attach Top Panel

   Insert 8 cam lock fittings (Part No. 119252) into the top panel. Attach the top panel to the side panels using 8 cam locks (Part No. 107716).

5. Step 5: Install Back Panel

   Slide the back panel into the grooves on the side and top/bottom panels.

6. Step 6: Place Shelves

   Position the remaining shelves into their designated slots.

7. Step 7: Secure Shelves

   Secure the shelves using 8 cam lock fittings (Part No. 119252) and 8 cam locks (Part No. 107716).

8. Step 8: Attach Feet

   Attach the 2 feet (Part No. 122628) to the bottom of the unit using 4 long screws (Part No. 115754).

9. Step 9: Attach Wall Mounting Brackets

   Attach the 2 brackets (Part No. 115753) to the top back of the unit using 4 cam lock screws (Part No. 103693) and 4 cam locks (Part No. 107716).

10. Step 10: Attach Decorative Top

    Attach the decorative top piece using 2 screws (Part No. 118331).

11. Step 11: Cover Cam Locks

    Cover the visible cam locks with the 2 caps/covers (Part No. 110646).

Wall Mounting Instructions

Important: To prevent tipping, this furniture must be secured to the wall with the supplied fixing devices. Use appropriate wall fixings for your wall type (not included). Follow these steps to securely attach the unit to the wall.

1. Step 12: Position Unit

   Place the assembled unit against the wall in the desired location.

2. Step 13: Mark Wall

   Using the attached brackets as a guide, mark the screw positions on the wall.

3. Step 14: Secure to Wall

   Drill holes in the wall at the marked positions and insert appropriate wall anchors. Attach the unit to the wall by screwing through the brackets into the wall anchors. Ensure screws are of appropriate length for your wall type.

4. Step 15: Final Check

   Ensure the unit is stable and securely fastened to the wall.