BILLY Bookcase
Assembly Instructions
Brand: IKEA
Safety Warning
WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent tip-over, this furniture must be used with the wall attachment device(s) provided.
Screws and plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.
Assembly Preparation
Recommended tools for assembly:
- Screwdriver
- Hammer
- Ruler
It is recommended that two people assemble this furniture.
Assemble on a soft surface, such as a carpet, to avoid scratching the furniture.
If you are unsure about any step or require assistance, please contact IKEA.
Parts List
Please check that you have all parts before starting assembly.
| Part Description | Part Number | Quantity |
|---|---|---|
| Dowel | 101351 | 16x |
| Cam Lock Screw | 118331 | 12x |
| Cam Lock | 151705 | 6x |
| Screw | 151706 | 6x |
| Shelf Support Pin | 119081 | 12x |
| Screw | 131372 | 16x |
| Wall Bracket | 109041 | 2x |
| Screw for Wall Bracket | 100823 | 4x |
| Shelf | 153548 | 5x |
| Wall Attachment Bracket | 106989 | 2x |
Step 1
Insert 16 dowels (101351) into the pre-drilled holes on the side panels.
[Diagram shows dowels being inserted into the edges of two long panels.]
Step 2
Screw 12 cam lock screws (118331) into the corresponding holes on the top and bottom panels.
[Diagram shows cam lock screws being screwed into panels.]
Step 3
Connect the side panels to the bottom panel. Insert 4 cam locks (151705) into the large holes on the side panels and turn them clockwise to secure the connection.
[Diagram shows side panels being attached to the bottom panel, with arrows indicating insertion and turning of cam locks.]
Step 4
Attach the other side panel to the bottom panel. Secure with 4 cam locks (151705).
[Diagram shows the second side panel being attached and secured with cam locks.]
Step 5
Attach the central vertical divider. Insert the divider into the slots on the bottom panel. Secure it by inserting and turning 4 cam locks (119081) from the underside of the bottom panel.
[Diagram shows the central divider being placed and secured from underneath using cam locks.]
Step 6
Place the top panel onto the assembled sides and central divider. Ensure it aligns correctly.
[Diagram shows the top panel being placed on top of the structure.]
Step 7
Secure the top panel by inserting and turning 6 cam locks (151705) into the large holes on the side panels and central divider.
[Diagram shows cam locks being inserted and turned to secure the top panel.]
Step 8
Slide the back panel into the grooves on the back of the unit.
[Diagram shows the thin back panel being slid into the rear grooves.]
Step 9
Secure the back panel using 6 screws (151706).
[Diagram shows screws being driven through the back panel into the frame.]
Step 11: Attach Wall Brackets
Attach the two wall brackets (109041) to the top of the assembled unit using 2 screws (100823) for each bracket. Total 4 screws (100823) used.
[Diagram shows wall brackets being screwed onto the top rear edge of the bookcase.]
Step 12: Final Reinforcement
Insert 16 screws (131372) into the designated holes on the side panels for structural reinforcement.
[Diagram shows screws being inserted into the side panels of the bookcase.]
Step 13: Insert Shelves
Insert the 12 shelf support pins (119081) into the desired holes on the inside of the side panels and central divider. Place the 5 shelves (153548) onto the support pins.
[Diagram shows shelves being placed onto shelf support pins inside the bookcase.]
Securing to the Wall
IMPORTANT: To prevent furniture tip-over, this unit MUST be secured to the wall using the provided wall attachment brackets (106989) and appropriate wall fixings (not included).
Follow these steps:
- Position the bookcase in its desired location against the wall.
- Mark the wall through the holes in the wall attachment brackets (106989) located at the top of the bookcase.
- Move the bookcase away from the wall.
- Drill holes in the wall at the marked locations. Insert appropriate wall plugs/anchors if necessary, depending on your wall type.
- Move the bookcase back into position.
- Secure the bookcase to the wall by driving appropriate screws through the wall attachment brackets (106989) and into the wall fixings.
Always use screws and plugs that are suitable for your wall material. If you are uncertain, seek professional advice.
[Diagrams on page 2 and 10 illustrate the importance of wall attachment and show the general concept.]
