GOOLOO TITAN 2000A SERIES JUMP STARTER

Introduction

Thank you for choosing a GOOLOO jump starter. To ensure a good user experience, personal safety, and property security, please read all instructions carefully before using this product. Keep this manual for easy reference.

Charge It First! While reading, you can begin charging your GP2000 using your mobile phone charger and the included Type-C cable.

Parts and Functional Description

• Indicator Lights: ? [Battery Level] indicators show charging status and remaining power.
• Power Switch: [Power Button] to turn the unit on/off and check battery status.
• LED Flashlight: ? LED Flashlight for illumination.
• Jumper Cable Socket In/Out: ? Socket for connecting the smart jumper cable.
• Type-C 15W Port: ? USB-C (15W) for charging the unit.
• Quick Charge Output Port: ⚡ USB-A (Quick Charge) for fast charging devices.
• 5V/2.1A Output Port: ⚡ USB-A (5V/2.1A) for standard charging.

For more information about GOOLOO products, visit: www.gooloo.com

Operation Instructions

Battery Indicator

Press the power switch to check the battery power. The indicators will blink one by one during charging. Solid indicators show the current battery level (e.g., 1 solid indicator = 25%, 4 solid indicators = 100%). All indicators turn off automatically when charging is complete.

How to Charge the GP2000

This unit can be charged using the included Type-C cable and a 5V wall charger (phone charger) or car charger (chargers not included). For faster input charging, use a QC3.0 compatible wall or car charger.

How to Start a Vehicle

Ensure the unit is over 50% charged (at least 2 battery indicators lit). If not used for over two months, charge it first.

1. Connect the smart jumper cable fully into the unit's jumper cable socket. Ensure the two indicators on the jumper cable are off.
2. Connect the red clamp to the positive (+) battery terminal and the black clamp to the negative (-) battery terminal of the vehicle.
3. Check the indicator lights on the jumper cable and follow the instructions:
   • ? Solid Green Light: Indicates correct connection and circuit readiness. You can start the vehicle directly.
   • ? Solid Red Light with Beeping ?: Indicates an incorrect connection. Re-correct the battery clamps as per step 2. Wait for the ? Solid Green Light before starting the vehicle.
   • ? Blinking Green Light: Indicates the vehicle battery voltage is too low. Press the "BOOST" button on the jumper cable. The light should turn solid green. Start the vehicle immediately within 30 seconds.
   • No Lights On, No Beeping: Indicates the vehicle battery may be damaged. Ensure correct connection, then press the "BOOST" button on the jumper cable. Wait for the ? Solid Green Light, then start the vehicle immediately within 30 seconds.
4. Start the vehicle when the ? Solid Green Light is on and solid.
5. Once the vehicle has started, remove the jumper cable from the jump starter and the vehicle battery.

15V/10A DC Output

This port can power 12V devices.

• Cigarette Lighter Socket Output: Connect 12V devices using the included Cigarette Lighter Socket Adapter.
• 5.5*2.1mm DC Output: Connect 12V devices compatible with this DC port size. Check device specifications for 12V DC input compatibility.

Protection Mode: The 15V/10A DC port has Short Circuit / Overload Protection. If the load power exceeds 150W, the unit will shut off automatically. Resolve the short circuit or overload issue and recharge the unit to reset.

How to Charge Your Phone or Tablet

1. Plug the charging cable into the USB-A port (either Quick Charge or 5V/2.1A) and your device.
2. Press the power switch. The unit will identify your device and charge it automatically. The battery indicators will light up during charging.

How To Turn On/Off The LED Flashlight

• Long press the power switch for 3 seconds to start the LED light.
• Press the power switch slightly to cycle through 3 modes: Normal, Strobe, SOS. Press again to turn it off.

Package Content

Technical Specifications

Troubleshooting

If there are any other problems, please contact GOOLOO customer service directly at contact@gooloo.com. They aim to solve problems within 24 hours.

Toxic and Harmful Substances

The '0' indicates that the content of harmful substances in all homogeneous materials is lower than the prescribed limit of the standard 2002/95/EC/RoHS.

Frequently Asked Questions (FAQ)

Q1: What is the operating temperature of this unit and how should it be stored?

A: This unit uses a lithium polymer battery with an operating temperature range of -20°C to 60°C (-4°F to 140°F). If the ambient temperature exceeds 60°C (140°F), the internal construction of the cells can be damaged, potentially causing swelling and safety issues. Do not store the device in a vehicle parked in hot weather for extended periods.

Q2: How do I start a vehicle with this unit?

A: Please refer to the "How to Start a Vehicle" section in this manual for detailed instructions.

Q3: Why do the Green and Red lights on the jumper cable blink alternately?

A: The smart jumper cable has an Over-start Protection function. If you attempt to start the vehicle more than 4 times within 2 minutes, the jumper cable will enter this protection mode, indicated by alternating green and red lights, and will cease output. To remove this protection, disconnect the jumper cable plug from the jump starter.

Q4: How do I know if this unit is connected to the vehicle correctly?

A: When the battery clamps are correctly connected to the vehicle battery, the indicator on the jumper cable will shine a steady green light. A solid red light with beeping indicates a reverse connection.

Q5: What should I do if this product cannot start a vehicle?

A: Recharge the unit fully. Try pressing the "BOOST" button on the jumper cable and wait for the green light to turn solid, then attempt to start the vehicle within 30 seconds. If it still does not work, contact GOOLOO customer service at contact@gooloo.com, providing your order ID.

Q6: What should I do if this product cannot be charged?

A: Charge it with a USB-C cable and a 5V wall charger for a full overnight period. If it still does not work, contact GOOLOO customer service at contact@gooloo.com, providing your order ID.

Q7: What should I do if this product cannot charge other devices?

A: Try using a different charging cable. If it works with another cable, the original cable may be defective; contact GOOLOO for a replacement. If it still does not work, email GOOLOO customer service at contact@gooloo.com, providing your order ID.

Q8: How do I turn off this unit?

A: The unit will automatically turn off after 30 seconds of inactivity (no load).

Q9: Can this product charge other devices while it is being charged?

A: Yes, it can.

Q10: Can this product charge other devices while starting a vehicle?

A: No, it cannot.

Q11: How often does this unit need recharging?

A: It is recommended to recharge the unit every 3 months to maintain battery health.

Q12: Why does the unit shut off in 30 seconds when charging other devices?

A: This product may not be able to charge devices that require a very low current (e.g., iPhone 6 series, headphones, smartwatches) because it has a minimum load current requirement (200mA). The unit will automatically shut off after 30 seconds if the load current is less than 200mA.

Warnings

• Read this instruction manual carefully before using this unit.
• Use caution while operating this unit. Failure to follow precautions may result in injury, damage to the unit, or damage to the vehicle battery.
• Do not allow persons without proper knowledge or ability to operate the device without supervision.
• Do not use this unit as a toy. Keep it away from children to avoid accidents.
• This unit is for 12V vehicles only. It may not be suitable for other vehicles. Do not use for aircraft, boats, etc.
• Do not use this unit if any cable, clamp, or cord is damaged, or if the unit is overheated, swelled, or leaking fluid.
• Do not use as a substitute for a vehicle battery or as a vehicle battery charger.
• Do not use the unit to start a vehicle while charging its internal battery.
• Only use the provided jumper cable and a qualified charger to charge this unit.
• Do not let this unit over-discharge. Charge it regularly; ideally every 3 months.
• Ensure the blue plug of the jumper cable is fully inserted into the jumper socket to prevent melting.
• Make sure battery terminals are clean before starting and that the battery clamps are well connected. Dirty or corroded terminals can reduce output power.
• Do not attempt to start the vehicle continuously more than four times within 2 minutes. If the vehicle does not start, wait at least 30 seconds before restarting.
• Do not connect the two clamps together.
• Do not connect the jump starter's clamps to the battery in reverse while pressing the "BOOST" button, as this can cause accidents.
• Only use this unit to start a vehicle when the battery indicator shows more than 2 bars (over 50% charge).
• Do not keep the unit connected to the vehicle battery after successfully starting the engine. Remove the product promptly to avoid potential damage.
• Do not recharge this product immediately after using it to start a vehicle; allow it to cool down for 30 minutes first.
• Do not allow the product to become wet or immerse it in water.
• Do not operate the product in explosive atmospheres, such as near flammable liquids, gases, or dust.
• Do not modify or disassemble the unit. Only authorized repair technicians should service this unit.
• Do not expose the product to extreme heat or fire.
• Do not drop or crush the unit. If dropped or damaged, have it checked by a qualified battery technician.
• Do not store in locations where the temperature may exceed 60°C (140°F).
• Charge only at ambient temperatures between -10°C to 45°C (14°F to 113°F).
• Under extreme conditions, the battery may leak. If liquid leaks from the unit, do not handle with bare hands. In case of skin contact, wash immediately with soap and water. If liquid contacts eyes, rinse with cold running water for at least 10 minutes and seek immediate medical attention.
• The unit contains lithium-based batteries. Dispose of the unit according to local regulations at the end of its product life or if it leaks.

Warranty Information

GOOLOO offers a limited warranty for this product against material and workmanship defects for a period of 12 months from the date of purchase by the end consumer.

• The warranty is valid upon presentation of the original receipt (Order ID) by the original purchaser.
• The warranty does not cover damage or product failure resulting from normal wear and tear, physical abuse, improper installation, misuse, modification, or repairs by unauthorized third parties.
• GOOLOO is not liable for any incidental or consequential damage arising from incorrect use or misuse of this product.
• All warranty claims are limited to repair or replacement of the defective product at GOOLOO's sole discretion.
• For member customers, an additional 6 months of service is provided, totaling 18 months.
• A 30-Day Money Back Guarantee is offered for issues within the first 30 days after purchase.

For warranty claims or service, contact GOOLOO customer service.

Attention

• ?? Do Not Submerge In Water
• ?? Do Not Disassemble
• ?⬇️ Do Not Drop
• ??️ Avoid Extreme Temperatures
• ?? Do Not Place Near or Into Fire

Customer Service

• Warranty Service: 12+6 Months Limited Warranty
• Technical Service: Lifetime Technical Service
• Contact Us: Feel free to contact GOOLOO at contact@gooloo.com (recommended).
• For FAQ and More Information: Visit www.gooloo.com
• Phone Support: 1-888-886-1805 (Mon.-Fri. PST 9:00 a.m. - 5:00 p.m.)
• Social Media: @gooloofans, @GoolooOfficial