Introduction
Thank you for choosing GOOLOO! Always follow basic safety precautions when using electrical appliances. Read all instructions carefully. Please keep this instruction manual for easy reference.
The GOOLOO G1500 is a SUPERSAFE™ Jump Starter Power Bank, featuring security protection technology by GOOLOO®.
Product Layout
The GOOLOO G1500 features the following components:
- Indicator light: Shows battery level and charging status.
- Power Switch: Turns the unit on/off.
- LED Flash Light: Integrated flashlight.
- Jump Start Socket: For connecting the smart jump cable.
- IN/OUT Type-C Port: For charging the unit or other devices.
- Quick Charge Output Port: For fast charging compatible devices.
- 5V 2.1A Output Port: Standard USB output.
Included accessories typically include:
- Smart jump cable
- USB-C cable
- Type-C to Type-C cable
[Diagram Description: The product layout shows the top and side views of the jump starter, highlighting ports and buttons. A separate diagram illustrates the smart jump cable, USB-C cable, and Type-C to Type-C cable.]
Operation Guidance
Indicator Light
Press the switch to check the storage level:
| Indicator Status | Storage Level |
|---|---|
| 1 Flashing | 0% |
| 1 Solid | 25% |
| 2 Solid | 50% |
| 3 Solid | 75% |
| 4 Solid | 100% |
The indicator light will flash one by one during charging. Solid indicators show the current storage level. All indicators turn off when charging is paused or completed.
How to Charge
- Connect the Type-C cable to a cigarette car adapter or a wall charger.
- Connect the Type-C connector to the GOOLOO G1500 unit.
Note: Both car chargers and home chargers can charge the unit. The car charger may need to be purchased separately.
[Diagram Description: Illustration shows the jump starter connected via USB-C to a car charger or wall adapter.]
How to Jump Start a Vehicle
Ensure the unit is charged to over 60%. If not used for more than two months, charge it first.
Steps:
- Connect the smart cable plug securely into the jump starter's jump start socket.
- Connect the red clamp to the positive (+) terminal of the vehicle's battery.
- Connect the black clamp to the negative (-) terminal of the vehicle's battery.
- Start the vehicle.
- Once the vehicle starts, remove the jump starter's plug from the unit.
- Remove the clamps from the vehicle's battery terminals.
[Diagram Description: A sequence of five images illustrates the jump-starting process: 1. Connecting the smart cable to the jump starter. 2. Connecting the red clamp to the positive battery terminal. 3. Connecting the black clamp to the negative battery terminal, with a 'START' indicator. 4. Disconnecting the jump starter plug. 5. Disconnecting the clamps from the battery.]
How to Use the Smart Cable
Connect the blue plug fully into the host unit, ensuring the Cable Indicator is off before proceeding. Operate according to the Cable Indicator's feedback.
Cable Indicator Feedback
- Green Light On: The connection is correct, and the circuit is working. You can start the engine.
- Red Light On with Buzzing: The connection is wrong. DO NOT start the engine. Reconnect properly as described in step 2 until the Green Light is on. [Visual: Beep, Beep]
- Green Light Blinking with Buzzing: The vehicle battery is low. Press the "BOOST" button, wait for the Green Light to stabilize, then start the engine within 30 seconds. [Visual: Beep, Beep]
- No Lights on, No buzzing: The vehicle's battery may be damaged. Confirm the clamps are connected correctly, press the "BOOST" button, wait for the Green Light to stabilize, then start the engine within 30 seconds.
How to Switch the LED Light
- Press the LED Switch for 3 seconds to turn on the LED light.
- Press slightly to cycle through 3 lighting modes: Flash light, Strobe light, SOS Signal flash.
- Press the switch again to turn off the light.
Parts List
| # | Part Name | Quantity |
|---|---|---|
| 1 | Host (G1500 Unit) | 1 |
| 2 | Type-C to Type-C cable | 1 |
| 3 | USB To Type-C Cable | 1 |
| 4 | Smart Jumper Cable | 1 |
| 5 | Quick Charge Wall Charger | 1 |
| 6 | Kit Bag | 1 |
| 7 | User Manual | 1 |
Technical Specification
| Input: | Type-C 15W (5V/3A) |
|---|---|
| Output: | Type-C 15W (5V/3A), Quick charge (5V/2.4A, 9V/2A, 12V/1.5A), 5V/2.1A, 15V/10A |
| Capacity: | 19800mAh / 73Wh |
| Starting Current: | 500A |
| Peak Current: | 1500A |
| Size: | 228*99.5*33mm |
| Weight: | 630g |
| Operating Temp.: | -20℃ ~ 60℃ / -4°F ~ 140°F |
| Lifetime: | >1000 cycles |
| Full Charging Time: | 5-6 Hours |
Trouble Shooting
| Finding | Cause | Remedies |
|---|---|---|
| No response when pressing the switch button. | Low voltage protection is started. | Plug the adapter into the input port to activate the device. |
Toxic and Harmful Substances
Composition and amount of toxic or harmful substance in G1500:
| Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 0 | 0 |
Indicates that the content of harmful substances in all homogeneous materials is lower than the prescribed limit of MCV (standard 2002/95/EC/RoHS).
FAQ
Q1: What is GOOLOO G1500 operating temperature and how to store it?
A: The car jump starter G1500 is lithium-ion. Operating temperature is -20~60℃ / -4~140°F. If the ambient temperature is higher than 60°C / 140°F, the internal components may be affected, potentially causing swelling and making it unsafe. DO NOT store it in a car for long periods, especially in summer.
Q2: How to jump start a car with G1500?
A: 1. Make sure it is over 60% charged. If not used for more than two months, charge it first. 2. Turn on the unit and connect the red clamp to the '+' terminal and the black clamp to the '-' terminal of the car battery. 3. When the jump cable indicator turns green (confirming correct connection), start your car. 4. If the jumper cable indicator does not turn green, turn on the car headlight and wait for the indicator to turn green, then try starting the car again. 5. Unplug the jumper cables from the jump starter within 30 seconds and remove the clamps from your car battery.
Q3: What is the correctly connected of the GOOLOO G1500 and the car?
A: When the clamps are connected to the car battery, the jumper cable indicator light shines a steady green light, indicating a correct connection. If the light flashes red, the connection is wrong.
Q4: What should I do if GOOLOO G1500 cannot start a car?
A: Recharge and fully charge the unit, then try again. Ensure you wait 10 seconds between each jump attempt. If it still does not work, contact GOOLOO customer service within the 12-month warranty period (provide your order ID). Email: fiona@gooloo.co.
Q5: What should I do if the GOOLOO G1500 cannot be charged?
A: Charge it using a 15V wall charger and car charger, and wait for about a whole night. If it still does not work, contact GOOLOO customer service within the 12-month warranty period (provide your order ID). Email: fiona@gooloo.co.
Q6: What should I do if GOOLOO G1500 cannot charge other devices?
A: Try using a different charging cable. If this works, the original cable may be defective; contact GOOLOO for a replacement. If it still does not work, contact GOOLOO customer service within the 12-month warranty period (provide your order ID). Email: fiona@gooloo.co.
Q7: Can the GOOLOO G1500 charge other devices while it is being charged?
A: No.
Q8: Can GOOLOO G1500 charge other devices while starting a car?
A: No.
Q9: How long does the battery storage last?
A: 6-12 months. However, it is suggested to recharge it every 3 months.
Warning
Read the instruction manual carefully before using this unit.
- Jump for 12V vehicles only. It is hazardous for other types of jumping. It is forbidden to use for other machines such as aircraft, ships, etc.
- Use caution while operating this unit.
- DO NOT use this unit if any cable clamp or cord is damaged.
- DO NOT use in place of a vehicle battery.
- DO NOT use as a battery charger.
- DO NOT leave the unit on the car battery after cranking the car successfully.
- Use only the jumper cable provided with this unit.
- Ensure the blue plug of the jump cable is plugged fully into the jumping socket; otherwise, the blue plug could melt.
- Make sure all battery connections are clean before jump starting and that the battery clamps are well connected. Dirty or corroded battery terminals may reduce the unit's power output.
- DO NOT jump start more than 3 times in a row, as this could damage the unit due to overheating. Allow two minutes between attempts. The jumping cable can become overheated and detach as a safety measure.
- Remove the product from the vehicle battery within 30 seconds after jump starting the engine to prevent damage.
- DO NOT connect the two clamps together.
- Only jump start when 3 to 4 indicator lights are illuminated.
- DO NOT allow young or infirm persons to use the unit without supervision.
- DO NOT use as a toy.
- DO NOT allow the product to become wet.
- DO NOT immerse the product in water.
- DO NOT operate the product in explosive atmospheres, such as those containing flammable liquids, gases, or dust.
- DO NOT modify or disassemble the unit. Only a qualified repair technician may repair this unit.
- DO NOT expose the product to extreme heat or fire.
- Ensure someone is within earshot or close enough to provide aid when working with batteries.
- Remove personal metal items such as rings, bracelets, necklaces, etc., when using the unit.
- DO NOT drop the unit. If the unit receives a sharp blow or is damaged, have it checked by a qualified battery technician.
- DO NOT store in locations where the temperature may exceed 70°C.
- Charge only at ambient temperatures between 0°C and 60°C.
- Charge only using the charger provided with this unit.
- DO NOT use the unit to jump start a vehicle while charging its internal battery.
- If this unit is leaking liquid, dispose of it at a proper recycling facility immediately.
- Under extreme conditions, the battery may leak. If liquid leaks from the unit, DO NOT handle with bare hands. If skin contact occurs, wash with soap and water immediately. If liquid contacts eyes, rinse eyes with cold running water for at least 10 minutes and seek medical treatment immediately.
- The unit contains lithium-based batteries. At the end of the product's life, dispose of the unit according to local regulations.
Attention
- ❌ Do Not Submerge In Water ?
- ❌ Do Not Disassemble ?️
- ❌ Do Not Dropping ⚠️
- ❌ Advoid Extreme Temperatures ?️
- ❌ Do Not Place Near or Into Fire ?
Safety Features:
- ?️ Overcharge/discharge Protection
- ? Fuse Protection
- ? Against-reverse Plug
Applied Standard: GB/T 18278-2000
[Certifications: CE, FC, RoHS, recycling symbol, etc.]
Warranty Information
GOOLOO offers a limited warranty for this product against any defects in material and workmanship for a period of 12 months from the purchase date by the end user/consumer. The conditions of the warranty are as follows:
- The warranty is only valid upon presentation of the original receipt (from dealer/retailer) by the original purchaser. The product must be returned for repair or replacement.
- The warranty is void if the serial number, date of purchase, or label has been removed.
- The warranty does not cover damage or product failure resulting from normal wear and tear, physical abuse, improper installation, misuse, modification, or repairs by unauthorized third parties.
- GOOLOO does not assume responsibility for any loss or damage incurred during shipment or as a result of force majeure.
- GOOLOO is not liable for any incidental or consequential damages arising from the use or misuse of this product.
- All warranty claims are limited to the repair or replacement of the defective product at GOOLOO's sole discretion.
- If GOOLOO repairs or replaces the product, the product will be covered for the remaining time of the original warranty period. Repair or replacement may involve the use of reconditioned units equivalent in function. Replaced parts or products become the property of GOOLOO.
- Consumable components, such as batteries, are not covered by the warranty.
Customer Service
- ? 12-Month Limited Warranty
- ? Lifetime Technical Service
- ✉️ Feel Free to Contact Us: fiona@gooloo.co
- ? For FAQ and More Information: www.gooloobox.com
Follow Us:
- f @gooloofans
- G+ @+Gooloofans
- t @gooloo-tech
- You @GoolooOfficial
- @mygooloo
- V gooloo
