IKEA LÖNSET Slatted Bed Base Assembly Instructions

Parts List

1 x Allen key (part no. 100006)
24 x Screws (part no. 100229)
8 x Screws (part no. 109049)
8 x Washers (part no. 100823)
20 x Curved wooden slats
40 x Straight wooden slats
6 x Frame support pieces
4 x Long frame side pieces
4 x Short frame cross pieces
4 x Straps

Assembly Steps

Step 1: Assemble the Frame

Begin by taking two long frame side pieces and two short frame cross pieces. Connect these to form a rectangular frame. Secure each connection point using three screws (part no. 100229) and the provided Allen key (part no. 100006). Insert two additional short frame cross pieces into the center of the frame. The diagram indicates that two slatted base units will be attached in the next step.

Step 2: Attach Slatted Base Units

Position the two slatted base units onto the assembled frame. Ensure they are aligned correctly; the diagram shows a warning symbol (❌) for improper alignment. Secure each slatted base unit to the frame using three screws (part no. 100229) and three washers (part no. 100823) on each side.

Step 3: Insert Wooden Slats

Take the curved wooden slats. Insert them into the plastic holders located along the sides of the slatted base units. The diagram illustrates the process of pushing the slats into the holders and includes warning symbols (❌) for incorrect insertion methods.

Step 4: Continue Inserting Slats

Continue inserting the remaining curved and straight wooden slats into their respective holders. Ensure all slats are properly seated across the entire slatted base.

Step 5: Secure the Frame

The diagram shows the fully assembled slatted base. Secure the overall frame structure by using four screws (part no. 109049) and four washers (part no. 100823) at designated points to reinforce the assembly.

Step 6: Final Check and Positioning

The diagram depicts the completed LÖNSET slatted bed base. This step may involve final tightening of screws using the Allen key (part no. 100006) and screws (part no. 100229), or adjusting the base. The illustration shows the base being flipped or positioned for the next stage.

Step 7: Attach to Bed Frame

Place the assembled LÖNSET slatted bed base into your bed frame. Secure the LÖNSET base to the bed frame using four screws (part no. 109049) and four washers (part no. 100823). The diagram shows these screws being inserted from the underside of the bed frame into the LÖNSET base for a stable connection.

	LÖNSET Slatted Bed Base Assembly Instructions Step-by-step guide for assembling the IKEA LÖNSET slatted bed base, including parts list and detailed instructions.
	IKEA LÖNSET Slatted Bed Base Assembly Instructions A comprehensive guide detailing the assembly process for the IKEA LÖNSET slatted bed base, including a list of parts, tools, and step-by-step instructions with textual descriptions of diagrams.
	IKEA LÖNSET Slatted Bed Base Assembly Instructions Comprehensive guide for assembling the IKEA LÖNSET slatted bed base. Includes a detailed parts list and step-by-step instructions with textual descriptions of diagrams.
	IKEA LÖNSET Slatted Bed Base Assembly Instructions Step-by-step guide for assembling the IKEA LÖNSET slatted bed base, including parts list and assembly diagrams.
	IKEA LÖNSET Slatted Bed Base Assembly Instructions Comprehensive guide for assembling the IKEA LÖNSET slatted bed base, detailing parts, tools, and step-by-step instructions with textual descriptions of diagrams.
	IKEA LÖNSET Adjustable Slatted Bed Base Assembly Instructions Comprehensive guide to assembling the IKEA LÖNSET adjustable slatted bed base, detailing each step with parts and actions.
	IKEA LÖNSET Slatted Bed Base Assembly Instructions Step-by-step guide to assembling the IKEA LÖNSET slatted bed base. Includes parts list and detailed instructions for a secure and comfortable bed frame.
	IKEA LEIRSUND Slatted Bed Base Assembly Instructions Detailed assembly instructions for the IKEA LEIRSUND slatted bed base, including parts list and step-by-step guidance.