HP LaserJet M109-M112 Series Setup Guide
Follow these steps to set up your HP LaserJet printer.
Step 1: Prepare the Printer
Action: Remove all tapes.
Description of visual: The image shows removing orange tape and a blue pull tab from the printer's internal components.
Step 2: Install the Cartridge
Action: Remove the cartridge from the printer.
Description of visual: The image depicts pulling a toner cartridge out of the printer's main compartment.
Caution: Do not touch the roller surface. ⚠️
Description of visual: A warning symbol ⚠️ is shown next to text advising against touching the roller surface.
Step 3: Remove Protective Film
Action: Remove the orange guides, tape, and pull the tab to remove the protective film.
Description of visual: This step shows a toner cartridge with orange plastic guides, tape, and a pull tab. The action involves removing these items to expose the cartridge for installation.
Step 4: Insert Cartridge and Close
Action: Reinsert the cartridge and close the door.
Description of visual: The image illustrates placing the toner cartridge back into the printer and then closing the printer's top cover.
Step 5: Load Paper
Action: Open the input tray and slide out the guides. Load Letter or A4 paper and adjust the guides.
Description of visual: This shows opening the paper input tray, extending the paper guides, and placing a stack of Letter or A4 paper into the tray, adjusting the guides to fit the paper size.
Action: Pull open the tray extender.
Description of visual: An illustration of pulling out an extension for the paper input tray.
Step 6: Power On and Connect
Action: Plug in and turn on the printer.
Description of visual: The image shows connecting the printer's power cord and pressing the power button to turn the device on.
Action: Install the required HP app from hp.com/start/install or your app store on a computer or mobile device.
Description of visual: This section displays logos for app stores (Microsoft Store, Apple App Store, Google Play Store) and a smartphone, indicating where to download the HP setup application.
Action: Follow instructions in HP app to connect the printer to a network and finish setup.
Description of visual: The visual suggests connecting the printer to a network using the HP app, showing a computer and a smartphone interacting with the printer.
Note: See Reference Guide for Wi-Fi troubleshooting and tips.