Tribesigns Executive Desk Assembly Instructions

Assembly Precautions:

1. Carefully read all instructions before beginning assembly.
2. Verify that all parts are present using the provided parts list before starting.
3. Assemble on a soft, clean, and flat surface, such as a carpet, to prevent scratches.
4. Do not fully tighten screws until all parts are correctly aligned and in place to avoid misalignment.
5. When using an electric screwdriver, reduce the power and torque to prevent damage to the furniture.

Parts & Hardware List:

A visual representation of all parts and hardware is provided. Please refer to the detailed diagrams on the following pages for specific part identification and quantities.

Key Hardware Components:

• A: φ6X35mm
• B: φ15x12mm
• C: φ15x10mm
• D: φ8x30mm
• E: φ3.5x14mm
• F: φ4x35mm
• G: φ7x47mm
• H: X1
• I: X28+1
• J: X8+1
• K: X8+1
• L: X4+1
• M: X13+1
• N: X2+1
• O: M4X55mm
• P: M4X18mm
• Q: M6XØ28mm
• R: L352
• S: M6X12mm
• T: M6X25mm
• U: M6X30mm
• V: M6X40mm
• W: M6X50mm

Assembly Steps:

Follow the numbered steps below for assembling your Tribesigns Executive Desk. Each step includes diagrams and specifies the hardware required.

• Step 1: Attach part A to parts 5, 6, 8, 12, and 13 using hardware A (X36).
• Step 2: Connect drawer slides (S, E, T) to parts 8 and 7 using hardware E (X12) and S (X6).
• Step 3: Assemble the side panels (8, 9, 6) using hardware B (X4) and D (X4).
• Step 4: Connect the main desk surface (10) to the assembled side panels using hardware B (X4) and D (X4).
• Step 5: Attach side panels (7, 12) to the main structure using hardware D (X6), G (X6), and H (X1).
• Step 6: Assemble the drawer unit components (13, 14) using hardware B (X12).
• Step 7: Attach the drawer unit to the main desk structure using hardware B (X8) and D (X7).
• Step 8: Secure the drawer unit further using hardware B (X6).
• Step 9: Attach the back panel (11) to the desk structure.
• Step 10: Secure the top surface (26) using hardware S (X2).
• Step 11: Assemble the supporting frame using parts 29, 30, 31, 32, 27, 28, 23, 24, 25 with hardware S (X16).
• Step 12: Connect the assembled frame sections using hardware S (X8).
• Step 13: Attach the side panels (15) to the frame using hardware I (X2) and Q (X2).
• Step 14: Connect the L-shaped extension to the main desk using hardware L (X4) and N (X2).
• Step 15: Secure the top surface (5) and drawer components using hardware B (X6), D (X6), and M (X3).
• Step 16: Attach the leg support (33) to part 2 using hardware J (X4).
• Step 17: Connect parts 2 and K, M using hardware K (X3) and M (X3).
• Step 18: Connect parts 3 and K, M using hardware K (X3) and M (X3).
• Step 19: Attach the top surface (1) and drawer components using hardware K (X2) and M (X4).
• Step 20: Install the drawers into the desk using hardware J (X4).
• Step 21: Assemble drawer boxes using parts 15, 16, 17, 18, 19, 20, 21, 22, 23 with hardware A (X8), C (X8), F (X8), O (X2), P (X4).
• Step 22: Assemble additional drawer boxes using parts 19, 20, 21, 22, 23 with hardware A (X4), C (X4), F (X4), O (X1), P (X2), R (X2).
• Step 23: Install drawer slides (E, T) into the assembled drawer boxes and desk frame.
• Step 24: Final assembly of the desk, ensuring all parts are securely fastened.

Customer Support:

For any assistance or inquiries, please contact the Tribesigns customer service team:

• Email: support@tribesigns.com
• Phone: 1-424-220-6888
• Website: www.tribesigns.com

Return Policy:

Tribesigns offers a hassle-free return process. If you are not completely satisfied with your purchase, please contact our customer service team. We handle the return process efficiently, including re-packaging, scheduling pick-ups, tracking packages, and processing replacements or refunds.