TONSTAD Chest of 6 Drawers
Assembly Instructions
Safety Warnings
⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using tip-over restraints. To further reduce the risk of serious injury and death from tip-overs:
- Place heaviest items in the lower drawer.
- Do not set TVs or other heavy objects on top of this product.
- Never let children climb or hang on drawers, doors, or shelves.
(Original warnings in Spanish, Portuguese, Indonesian, and Malay are consolidated into this English version.)
Parts List
Identify all parts before starting assembly. Ensure you have all components and hardware. Part numbers are referenced from the original document.
Hardware:
- Part 109567: Screw, 8 mm (5/16") - Quantity: 2x
- Part 10087223: Screw, 8 mm (5/16") - Quantity: 2x
- Part 109049: Screw, 8 mm (5/16") - Quantity: 2x
- Part 100823: Screw, 8 mm (5/16") - Quantity: 4x
- Part 106989: Screw, 8 mm (5/16") - Quantity: 2x
- Part 371505: Screw, 3 mm (1/8") - Quantity: 2x
- Part 10127303: Panel - Quantity: 6x
- Part 190459: Drawer Slide Component - Quantity: 1x
- Part 10040201: Cam Lock - Quantity: 5x
- Part 153552: Cam Lock Screw - Quantity: 5x
- Part 101339: Dowel - Quantity: 10x
- Part 101345: Dowel - Quantity: 10x
- Part 145718: Panel - Quantity: 24x
- Part 119030: Panel - Quantity: 24x
- Part 151705: Drawer Front Panel / Drawer Back Panel - Quantity: 24x (Front) + 14x (Back)
- Part 151706: Drawer Side Panel - Quantity: 24x
- Part 100347: Panel - Quantity: 3x
Assembly Steps
Step 1
Attach the two side panels (part 10127303) to the base panel (part 100347). Insert 6 dowels (part 101339) into the pre-drilled holes on the base panel. Align the side panels and secure them with 6 screws (part 100347) – 3 screws per side panel.
Step 2
Attach the second base panel (part 100347) to the two side panels (part 10127303). Use 6 dowels (part 101339) and 6 screws (part 100347) – 3 per side panel.
Step 3
Attach the back support panel (part 10127303) to the side panels. Use 6 dowels (part 101339) and 6 screws (part 100347).
Step 4
Insert cam lock screws (part 153552) into the designated holes on the side panels and back panel. Insert cam locks (part 10040201) into the corresponding holes on the base panels. Turn the cam locks to secure the structure.
Step 5
Assemble the drawer boxes. For each drawer, take two drawer side panels (part 151706), one drawer back panel (part 151705), and one drawer base panel (part 119030). Connect the sides to the back panel using screws (part 100823). Slide the base panel into the grooves. Secure the front of the drawer box with a panel (part 145718) using cam locks and cam lock screws.
Step 6
Attach drawer slides (part 190459) to the inside of the main cabinet structure. Ensure correct orientation (left/right) and placement according to pre-drilled holes.
Step 7
Attach the corresponding drawer slide components to the assembled drawer boxes.
Step 8
Insert the assembled drawers into the cabinet by aligning the slides.
Step 9
Attach drawer handles (if applicable, not explicitly shown with part numbers) to the drawer front panels (part 151705).
Step 10
Repeat steps 5-9 for all remaining drawers.
Step 11
Attach the top panel (part 100347) to the assembled cabinet structure. Use dowels (part 101345) and screws (parts 109567, 10087223, 109049, 106989).
Step 12
Secure the back of the cabinet by attaching the back panels (part 145718) using screws (part 371505).
Step 13
Final check of all connections and stability.
Wall Mounting Instructions
⚠️ It is crucial to secure the furniture to the wall to prevent tip-over accidents. The provided screws and plugs can be used with most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs. If you are uncertain about your wall type, seek professional advice.
Wall Type Guide:
- (A) Solid Wall: Use screws directly into the wall material.
- (B) Hollow Wall: Use appropriate wall plugs (provided) with screws.
- (C) Solid Wood: Use screws directly into the wood.
Hardware for Wall Mounting:
- Screw type for solid walls (A) and solid wood (C): 8 mm (5/16") diameter, 70 mm length.
- Screw type for hollow walls (B): 8 mm (5/16") diameter, 30 mm length, used with wall plugs.
- Wall plugs (for hollow walls).
Steps:
- Determine the correct mounting hardware for your wall type.
- Mark the desired height on the wall.
- Drill holes in the wall according to the hardware specifications.
- Insert wall plugs if using for hollow walls.
- Attach the furniture to the wall using the appropriate screws, ensuring a secure connection.
For more information on securing furniture to walls, visit www.IKEA.com/secure-it or www.IKEA.cn/secure-it.
