Franke Titan TTD Sinks

Product Overview

The Franke Titan TTD series offers durable and stylish kitchen sinks manufactured from Tectonite. This document provides comprehensive installation and user guidance.

Installation Guide

Tools Required

• Measuring tape
• Ruler
• Electric drill
• Jigsaw
• Sealant gun
• Screwdriver

Step 1: Preparation and Cutout

Ensure you have the correct countertop cutout dimensions. The sink is designed for inset installation. Key dimensions for the sink models are:

Note: Dimensions A and B may have tolerances indicated by '+/-' values in original documentation.

Step 2: Drilling for Fixtures

Prepare the sink for faucet, soap dispenser, or other accessories by drilling necessary holes. Use a drill with variable speed control (RPM) for precise cuts. A 35 mm diameter hole is specified for certain fixtures.

[Drilling operation with variable speed control (RPM) indicated.]

[Diagram showing a 35 mm hole being drilled.]

Step 3: Sink Placement

Carefully place the sink into the prepared countertop cutout. Ensure a proper fit. Applying a suitable sealant around the rim of the cutout is recommended before placing the sink to create a watertight seal.

[Diagram showing the sink being placed into the countertop cutout with sealant applied.]

Step 4: Securing the Sink

Use the provided mounting clips to secure the sink firmly to the countertop. The clips are designed to engage with the underside of the countertop. The method of securing may vary slightly based on countertop thickness.

[Diagrams showing mounting clips securing the sink to the countertop, illustrating engagement with different countertop thicknesses: less than 20 mm, 20 mm, 30 mm, and 40 mm.]

Step 5: Final Sealing and Curing

Complete the installation by ensuring all edges are properly sealed. Allow a curing period of 24 hours for the sealant to fully set before use.

[Diagram showing the sink fully installed and sealed, with a 24-hour curing indicator.]

Step 6: Care and Maintenance

To maintain the appearance and longevity of your Tectonite sink:

• Use running water and mild detergent for daily cleaning. [✔️]
• Clean manually with a soft cloth or sponge. [✔️]
• Use approved Franke sink cleaners. [✔️]
• Avoid abrasive sponges or pads. [❌]
• Do not use nitro-based cleaners. [❌]
• Avoid harsh chemicals and abrasive scrubbing. [❌]
• Refer to the user manual for detailed cleaning instructions. [ℹ️]

For further assistance or product information, visit franke.com.

Global Contact Information

Franke provides support and product information through its global network of offices. For specific contact details in your region, please refer to the Franke website or the contact list provided in the original documentation.

[Summary of contact availability across various countries.]