Franke Orion OID Sinks
Installation and User Manual
Model Overview
The Franke Orion OID series offers high-quality kitchen sinks crafted from durable Tectonite material. Available models include:
- OID 611-62
- OID 611-78
- OID 611-94
- OID 621-116
- OID 651-100
Installation Tools Required
Ensure you have the following tools before starting installation:
- Measuring tape [tape measure]
- Ruler [ruler]
- Drill [drill]
- Jigsaw [jigsaw]
- Sealant gun [sealant gun]
- Screwdriver [screwdriver]
Installation Steps
Step 1: Prepare Countertop Cutout
Refer to the template (indicated by [info] icon and 'i 6') for precise dimensions (A, B, r1). Mark and cut the countertop accurately.
Step 2: Drill Holes for Fixtures
Drill necessary holes for the faucet and accessories. Use caution and maintain appropriate drill speed [warning: - RPM]. For accessory mounting, drill a hole with a diameter of 35 mm [diameter: 35 mm].
Step 3: Apply Sealant
Apply a continuous bead of sealant around the edge of the countertop cutout where the sink will be seated.
Step 4: Position and Seat the Sink
Carefully lower the sink into the cutout, ensuring it aligns correctly with the sealant bead.
Step 5: Secure the Sink
From underneath the countertop, attach and tighten the provided clips to secure the sink firmly in place. Adjust clip positions as needed for different countertop thicknesses (20 mm, < 20 mm, 30 mm, 40 mm).
Step 6: Final Curing
Complete any final sealing or fitting. Allow the sealant to cure fully for at least 24 hours [⏰ 24h] before use.
Care and Maintenance
To maintain the appearance and longevity of your Tectonite sink:
- Rinse with water [?] after each use.
- Use a mild, colored sink cleaner [?] and a soft cloth [?] or sponge [?] for cleaning.
- Avoid using nitro-based cleaners [❌ Nitro], chlorine-based cleaners [❌ Cl], abrasive pads, or harsh chemicals that can damage the surface.
Technical Specifications
Model | A (mm) | B (mm) | r1 (mm) | Minimum Cabinet (mm) |
---|---|---|---|---|
OID 611-62 | 600 +2-0 | 480 +2-0 | 7.5 | 450 |
OID 611-78 | 760 +2-0 | 480 +2-0 | 7.5 | 450 |
OID 611-94 | 920 +2-0 | 490 +2-0 | 7.5 | 600 |
OID 621-116 | 1140 +2-0 | 490 +2-0 | 7.5 | 800 |
OID 651-100 | 980 +2-0 | 490 +2-0 | 7.5 | 600 |
Global Support
Franke provides global support for its products. For detailed information, local contacts, and further assistance, please visit the official Franke website at franke.com.