Franke Urban Sinks
Installation and User Manual
Product Overview
The Franke Urban series offers a range of high-quality kitchen sinks, primarily constructed from durable and aesthetically pleasing Fragranite material. This manual provides comprehensive instructions for installation and care.
Available Models
The Urban series includes various models. Please refer to the dimensions tables below for specific model details and configurations (single bowl, double bowl, etc.).
Installation Guide
General Safety and Tools
Before starting installation, ensure you have the necessary tools and follow safety precautions:
- ⚠️ Warning: Read all instructions before proceeding.
- ? Wear protective gloves.
- ? Wear safety glasses.
- ? Consider wearing a mask, especially when cutting.
- ? Use hearing protection if operating loud machinery.
- Required tools may include: ? Measuring tape, ?️ Screwdrivers, ? Ruler, ? Jigsaw, ? Sealant gun, ड्रिल Drill.
Inset Mount Installation
This section details the installation of the sink into a countertop cutout.
Step 1: Preparation
Review manual and gather parts. The sink requires a cutout of specific dimensions. For faucet installation, a hole of Ø 35 mm is typically needed.
Diagram shows: Safety icons, tools, box with info icon (ℹ️) and reference to step 6.
Step 2: Countertop Cutout
Measure and cut the countertop opening according to the dimensions (A, B, r1) specified for your model in the dimensions table. Ensure the radius (r1) is correct.
Diagram shows: Countertop with dimensions A, B, r1 marked.
Step 3: Attach Securing Clips
Attach the provided securing clips to the underside of the sink rim. These clips will hold the sink in place.
Diagram shows: Sink underside with clips being attached.
Step 4: Position Sink
Carefully place the sink into the prepared countertop opening. Ensure it sits correctly.
Diagram shows: Sink being lowered into the countertop cutout.
Step 5: Apply Sealant
Apply a continuous bead of sealant around the underside edge of the sink rim that will contact the countertop. This creates a watertight seal.
Diagram shows: Sealant gun applying a bead of sealant.
Step 6: Secure Sink
Tighten the securing clips from underneath to firmly attach the sink to the countertop. Ensure even pressure.
Diagram shows: Clips being tightened with a screwdriver, pulling the sink down.
Step 7: Final Check
Ensure the sink is securely fastened. Allow the sealant to cure for at least 24 hours (⏳) before use.
Diagram shows: Installed sink with a 24-hour indicator.
Inset Mount Dimensions
| Model | Sink Diagram | A (mm) | B (mm) | r1 (mm) | Minimum Cabinet Width (mm) |
|---|---|---|---|---|---|
| UBG 610-56 | [Single Bowl] | 540±2 | 480±2 | 15 | 600 |
| UBG 611-62 | [Single Bowl] | 600±2 | 480±2 | 15 | 450 |
| UBG 610-78 | [Single Bowl] | 760±2 | 480±2 | 15 | 800 |
| UBG 611-78 | [Single Bowl] | 760±2 | 480±2 | 15 | 450 |
| UBG 611-78L | [Single Bowl with Drainer] | 760±2 | 480±2 | 15 | 600 |
| UBG 620-78 | [Double Bowl] | 760±2 | 480±2 | 15 | 800 |
| UBG 651-78 | [Double Bowl] | 760±2 | 480±2 | 15 | 600 |
| UBG 611-86 | [Single Bowl] | 840±2 | 480±2 | 15 | 500 |
| UBG 620-86 | [Double Bowl] | 840±2 | 480±2 | 15 | 900 |
| UBG 651-100 | [Double Bowl] | 980±2 | 480±2 | 15 | 600 |
| UBG 611-100 | [Single Bowl] | 980±2 | 480±2 | 15 | 600 |
| UBG 621-116 | [Double Bowl] | 1140±2 | 480±2 | 15 | 800 |
Flush Mount Installation
This section details the installation of the sink where the rim is flush with the countertop surface.
Step 1: Preparation
Review manual and gather parts. A cutout is required. A hole of Ø 35 mm is typically needed for the faucet.
Diagram shows: Safety icons, tools, box with info icon (ℹ️) and reference to step 11.
Step 2: Countertop Cutout
Measure and cut the countertop opening according to the dimensions (A, B, C, D, r1, r2) specified for your model in the dimensions table. The countertop thickness (H) is also indicated.
Diagram shows: Countertop with dimensions A, B, C, D, r1, r2, and thickness H marked. A cross-section view is also shown.
Step 3: Attach Securing Clips
Attach the provided securing clips to the underside of the sink rim. These clips will hold the sink in place.
Diagram shows: Sink underside with clips being attached.
Step 4: Position Sink
Carefully place the sink into the prepared countertop opening. Ensure it sits correctly.
Diagram shows: Sink being lowered into the countertop cutout.
Step 5: Apply Sealant
Apply a continuous bead of sealant around the underside edge of the sink rim that will contact the countertop. This creates a watertight seal.
Diagram shows: Sealant gun applying a bead of sealant.
Step 6: Secure Sink
Tighten the securing clips from underneath to firmly attach the sink to the countertop. Ensure even pressure.
Diagram shows: Clips being tightened with a screwdriver, pulling the sink down.
Step 7: Final Check
Ensure the sink is securely fastened. Allow the sealant to cure for at least 24 hours (⏳) before use.
Diagram shows: Installed sink with a 24-hour indicator.
Flush Mount Dimensions
| Model | Sink Diagram | A (mm) | B (mm) | C (mm) | D (mm) | r1 (mm) | r2 (mm) | Minimum Cabinet Width (mm) |
|---|---|---|---|---|---|---|---|---|
| UBG 210-56 | [Single Bowl] | 566 +0.50 ±2 | 540 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 600 |
| UBG 210-78 | [Single Bowl] | 786 +0.50 ±2 | 760 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 800 |
| UBG 211-62 | [Single Bowl] | 626 +0.50 ±2 | 600 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 450 |
| UBG 211-78 | [Single Bowl] | 786 +0.50 ±2 | 760 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 450 |
| UBG 211-78L | [Single Bowl with Drainer] | 786 +0.50 ±2 | 760 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 600 |
| UBG 211-86 | [Single Bowl] | 866 +0.50 ±2 | 840 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 500 |
| UBG 211-100 | [Single Bowl] | 1006 +0.50 ±2 | 980 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 600 |
| UBG 220-78 | [Double Bowl] | 786 +0.50 ±2 | 760 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 800 |
| UBG 220-86 | [Double Bowl] | 866 +0.50 ±2 | 840 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 900 |
| UBG 251-78 | [Double Bowl] | 786 +0.50 ±2 | 760 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 600 |
| UBG 251-100 | [Double Bowl] | 1006 +0.50 ±2 | 980 +0.50 ±2 | 506 +0.50 ±2 | 480 +0.50 ±2 | 17,5 | 15 | 600 |
Cleaning and Maintenance
Proper care ensures the longevity and appearance of your Fragranite sink.
Recommended Cleaning:
- ? Rinse the sink with water after each use.
- ? Wash with a soft cloth or sponge and mild soap.
- ? Use a non-abrasive sponge for tougher spots.
- Use a dedicated sink cleaner like 'COLORED SINK CLEANER' (as pictured).
Avoid:
- ❌ Abrasive pads or scouring powders.
- ?? Harsh chemicals such as 'Nitro' based cleaners or chlorine-based bleaches (Cl).
- ? Allowing acidic or alkaline substances to dry on the surface.
- ? Vigorous scrubbing that could damage the surface.
Contact Information
For sales and support, please contact your local Franke representative:
- Argentina: Industrias Spar San Luis S.A., Buenos Aires. Phone: +54 11 4311 7655
- Australia: Franke Australia, Dandenong South VIC. Phone: +61 3 9700 9100
- Belgium: Franke N.V., Ninove. Phone: +32 54 310 111
- Brazil: Franke Sistemas de Cozinhas Ltda, Joinville-SC. Phone: 0800-4773000
- Canada: Franke Kindred Canada Ltd., Midland, ON. Phone: +1 866 687 7465
- China: Franke (China) Kitchen Systems Co., Ltd., Heshan, Guangdong. Phone: 400 882 9898
- Czech Republic: Franke s.r.o., Praha 9. Phone: +420 281 090 445
- Denmark: Franke KS Denmark, Lystrup. Phone: +45 8624 9024
- Finland: Franke Finland Oy, Naarajärvi. Phone: +358 15 341 11
- France: Franke France S.A.S., Chambly. Phone: +33 130 289 400
- Germany: Franke GmbH, Bad Säckingen. Phone: +49 7761 52 199
- Greece: Franke Hellas S.A., Markopoulo Attikis (Athens). Phone: +30 22991 500 00
- Hong Kong SAR: Franke Asia Hong Kong, Quarry Bay. Phone: +852 3184 1900
- India: Franke Faber India Private Limited, Pune. Phone: 1800 209 3484
- Italy: Franke S.p.A., Peschiera del Garda. Toll-free: 800 359 359
- Kazakhstan: Franke Kazakhstan Ltd., Almaty City. Phone: +7 727 297 3812
- New Zealand: Franke Australia, Dandenong South VIC. Phone: +64 9 964 0400
- Norway: Franke KS Norway, Lystrup, Denmark. Phone: +47 35 566 450
- Poland: Franke Polska Sp. z o.o., Raszyn. Phone: +48 22 711 6700
- Portugal: Franke Portugal S.A., Cacém. Phone: +351 21 426 9670
- Romania: Franke Romania SRL, Pantelimon. Phone: +40 21 350 1550
- Russia: Franke Russia GmbH, Kaluga. Phone: +7 800 555 1255
- Singapore: Franke Singapore Pte Ltd, Vertex. Phone: +65 9838 2542
- Slovak Republic: Franke Slovakia s.r.o., Strečno. Phone: +420 281 090 445
- South Africa: Franke South Africa, Durban. Phone: +27 31 450 6300
- Spain: Franke España S.A.U., Sant Cugat del Vallès. Phone: +34 934 456 768
- Sweden: Franke Futurum AB, Byske. Phone: +46 912 405 00
- Switzerland: Franke Küchentechnik AG, Aarburg. Phone: +41 800 583 243
- Thailand: Franke (Thailand) Co., Ltd., Bangkok. Phone: +66 2 013 7900
- The Netherlands: Franke Nederland BV, Eindhoven. Phone: +31 85 0261 15 11
- Turkey: Franke Mutfak ve Banyo Sistemleri Sanayi ve Ticaret A.S., Gebze Kocaeli. Phone: +90 262 644 6595
- Ukraine: Franke Ukraina LLC, Kyiv. Phone: 0 800 301 801
- United Kingdom: Franke UK Ltd., Manchester. Phone: +44 161 436 6280
- USA: Franke Home Solutions North America, LLC, Smyrna, TN. Phone: 1 800 626 5771
For more information, visit franke.com ?.
Home
