LÅDMAKARE Assembly Instructions

This document provides assembly instructions for the IKEA LÅDMAKARE furniture unit.

Important Safety Information ⚠️

WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall with the included wall attachment devices.

Fastening devices for the wall are not included since different wall materials require different types of fastening devices. Use fastening devices suitable for the walls in your home. For advice on suitable fastening devices, contact your local specialized dealer.

Included Hardware

• 4x Cam Lock (Part 101449)
• 4x Cam Bolt (Part 10043592)
• 8x Spring (Part 151931)
• 4x Washer (Part 126916)
• 4x Bracket (Part 158701)
• 4x Wall Bracket (Part 114664)
• 1x Wrench (Part 10046118)
• Various screws and caps (e.g., 10111468, 10111561, 10097004)

Assembly Steps

Step 1: Prepare Panels

Take the side panels. Insert cam locks (101449) into the pre-drilled holes. Insert cam bolts (10043592) into their corresponding holes on the panels.

Step 2: Connect Frame Components

Align the cam bolts with the cam locks on the connecting panels. Tighten the cam locks to secure the frame components together, forming the basic structure of the unit.

Step 3: Assemble Main Structure

Connect the base and side panels to form the main cabinet structure. Insert the shelves into the designated slots or pre-drilled holes on the side panels.

Step 4: Secure Shelves

Use screws (e.g., 10111468) and cam locks (e.g., 10111561) to firmly attach each shelf to the side panels. Ensure shelves are level and securely fastened.

Step 5: Attach Wall Bracket to Unit

Attach the primary wall anchoring bracket (e.g., Part 151931) to the top rear of the furniture unit. Use the appropriate screws (e.g., 126916) for this attachment. Ensure the bracket is oriented correctly for wall connection.

Step 6: Position Unit and Initial Wall Attachment

With assistance from another person, carefully position the assembled furniture unit against the wall where it will be placed. Use brackets (e.g., 158701) to make an initial attachment to the wall, ensuring the unit is stable.

Step 7: Tighten Fittings

Use the provided wrench (10046118) to tighten any adjustable fittings on the unit. This ensures all connections are secure and the unit is stable.

Step 8: Final Wall Anchoring

Securely anchor the unit to the wall. Attach the wall strap or bracket to the wall using appropriate wall fasteners (not included, select based on wall material). Connect this wall-mounted component to the furniture unit's bracket. Ensure the connection is robust and the unit is prevented from tipping.

Note: Different screw lengths (e.g., 6 mm, 12 mm, 18 mm) may be required for wall attachment depending on the wall type.

Step 9: Apply Protective Caps

Attach any included protective caps (e.g., 10097004) to cover exposed screw heads or fittings for a cleaner finish.

Step 10: Final Check

Perform a final check of the entire unit. Ensure all screws are tightened, all connections are secure, and the unit is stable and properly anchored to the wall to prevent any risk of tipping.