LÅDMAKARE Assembly Instructions

Important Safety Information

⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall with the included wall attachment devices.

Fastening devices for the wall are not included since different wall materials require different types of fastening devices. Use fastening devices suitable for the walls in your home. For advice on suitable fastening devices, contact your local specialized dealer.

This warning is repeated in multiple languages throughout the document, emphasizing the critical need for wall anchoring to prevent severe injury or death.

Tools Required

The following tools are typically required for assembly:

Screwdriver ?
Hammer ?
Spirit level ?
Drill ड्रिल
Ladder ?

Parts Included

The following parts are included in the package:

4x Bolt (Part No. 10043592)
4x Nut/Washer Assembly (Part No. 101449)
8x Spring (Part No. 151931)
4x Washer (Part No. 126916)
1x Wrench (Part No. 10097004)
4x Bracket (Part No. 10046118)
4x Bracket (Part No. 114664)

Assembly Steps

Step 1: Panel Preparation

Prepare two long side panels. Insert dowels into the designated holes and secure them. The diagram suggests using a hammer ? to gently tap the dowels into place, ensuring they are properly seated.

Step 2: Initial Component Attachment

Attach a component to the prepared side panels. Use the provided bolts and washers. Pass the bolts through the holes and secure them with the washers.

Step 3: Main Frame Assembly

Begin assembling the main structure. Connect the side panels to the base and top panels using screws. The detailed view shows how two panels join together, likely using a cam lock or similar system secured by screws.

Step 4: Shelf Installation

Install the shelves. Insert screws into the side panels at the designated positions. Then, attach the shelves by screwing them into these points. Depending on the shelf's position, you might use approximately 16 to 18 screws in total for this step.

Step 5: Wall Bracket Attachment to Unit

Prepare the unit for wall mounting. Attach the wall brackets (Part No. 10046118 and 114664) to the top rear of the unit. Use the provided screws and washers. Ensure you use the correct washer type as indicated by the diagram (one type is shown crossed out ❌).

Step 6: Inserting Shelves

Carefully insert the shelves into the assembled unit. They should slide into place or rest on pre-installed supports.

Step 7: Securing Components

Use the provided wrench (Part No. 10097004) to tighten fasteners, likely securing a back panel or another structural component to the unit.

Step 8: Wall Mounting

Position the assembled unit against the wall where it will be permanently located. Align the wall brackets attached to the unit with the wall. Use appropriate screws and wall anchors (not included) suitable for your wall type to securely fasten the unit to the wall. The diagram shows different screw lengths (6mm, 12mm, 18mm) and indicates using the correct type of washer.

Step 9: Attaching Cover/Accessory

Attach a cover or decorative piece (Part No. 10097004) to the side of the unit using screws.

Step 10: Final Placement and Securing

The unit is now assembled and secured to the wall. Ensure it is stable and correctly positioned.

	LÅDMAKARE Storage Unit Assembly Instructions Comprehensive guide for assembling the IKEA LÅDMAKARE storage unit, emphasizing safety and proper wall anchoring. Includes parts list and step-by-step instructions.
	TONSTAD Bookcase Assembly and Safety Guide This document provides assembly instructions and critical safety information for the IKEA TONSTAD bookcase, emphasizing the importance of securing the furniture to the wall to prevent tip-over injuries.
	RÅGRUND Shelving Unit Assembly Instructions \| IKEA Step-by-step guide to assembling the IKEA RÅGRUND shelving unit. Includes detailed steps, parts list, and crucial safety warnings to prevent furniture tip-over. Learn how to safely assemble and secure your RÅGRUND unit.
	IKEA LÅDMAKARE Assembly Instructions and Safety Guide Step-by-step assembly instructions for the IKEA LÅDMAKARE furniture unit. This guide includes essential safety warnings about furniture tip-over prevention and details on how to securely anchor the unit to your wall. It lists all included hardware and provides clear visual guidance for assembly.
	PLATSA Storage System Assembly and Safety Guide \| IKEA Comprehensive assembly instructions and safety guidelines for the IKEA PLATSA storage system, emphasizing crucial wall attachment to prevent tip-over accidents.
	LÅDMAKARE Assembly Instructions \| IKEA Official assembly instructions for the IKEA LÅDMAKARE unit. Learn how to safely build and install your furniture with step-by-step guidance, including important safety warnings and a detailed parts list.
	RÅGRUND Shelving Unit - Assembly Instructions and Safety Warnings Comprehensive assembly guide and critical safety information for the IKEA RÅGRUND shelving unit. Includes instructions on installing the anti-tip device to prevent furniture tipover accidents.
	RÅGRUND Shelving Unit Assembly Instructions Comprehensive assembly guide for the IKEA RÅGRUND shelving unit. This document provides step-by-step instructions, a parts list, and essential safety warnings to ensure proper and secure installation of your bamboo shelving unit.