Installation & Assembly
Notice
1. Follow the installation instructions. Please confirm all accessories are preset before installation.
2. Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces which are correctly assembled.
3. If you encounter any problems during installation, please contact our customer service.
4. Please unbox the item from the side with an open-label and put a carpet on the floor to avoid scratching it.
Recommended installers: 2 ??⚒️
Estimate installation time: 20 minutes ⏱️
Parts List
Item No. | Reference Image | Qty | Item No. | Reference Image | Qty |
---|---|---|---|---|---|
A | Rectangular tabletop | x1 | 1 | Long screw | x14 |
B | Rectangular support piece | x2 | 2 | Shorter, thicker screw | x1 |
C | Curved panel forming part of a leg | x2 |
Assembly Steps
Step 1
Attach two curved leg panels (C) to the underside of the tabletop (A) using screws (1) and (2). Secure the rectangular support pieces (B) to the leg panels (C) using screws (1).
Step 2
Attach the assembled leg structures to the underside of the tabletop (A) using screws (1).