Assembly Instructions

Components List

Part A (x1) - Top Panel
Part B (x1) - Base Panel
Part C (x2) - Side Panels
Part D (x2) - Side Panels

Step 1: Assemble Base and Sides

Place Part B (Base Panel) flat. Attach one Part C (Side Panel) vertically to one side of Part B, and one Part D (Side Panel) vertically to the opposite side of Part B. Ensure the crosswise slat on the panels is oriented towards the bottom for correct assembly.

Diagram Description: Part B is shown horizontally. Part C is attached to its left edge, and Part D to its right edge, both standing upright. Arrows indicate the connection points.

Step 2: Attach Support

With the base and side panels assembled, place the next component (likely a support or shelf) onto the top edges of the side panels (C and D).

Diagram Description: The structure from Step 1 is shown upright. A horizontal component is being lowered onto the top of the side panels.

Step 3: Secure Structure

Carefully lay the partially assembled structure onto its side. Grasp the locking mechanism. Angle four locking tongues to approximately 45 degrees to secure the adjacent wooden strips of the side panels.

Diagram Description: The assembly is shown lying on its side. A close-up view illustrates how locking tongues are angled to engage with wooden strips on the side panels, securing the structure.

Step 4: Attach Top Panel

Place Part A (Top Panel) onto the assembled structure. The final assembled product is now complete.

Diagram Description: Part A is shown being placed on top of the main structure. An image of the fully assembled product is displayed.

Attention

If any parts are missing, please send a message detailing the name of the missing part as listed on the first page of these instructions. Kindly provide your full address so that replacement parts can be sent as soon as possible.

Customer satisfaction is important. In case of any loss or damage, please contact us at any time, and we will provide effective solutions.

	Latitude Run Coffee Table Set Assembly Instructions Comprehensive assembly guide for the Latitude Run coffee table set, featuring two coffee table bases and one coffee table top. Includes detailed part lists, step-by-step instructions, and after-sale service information.
	Latitude Run Cantin Fluted Coffee Table Assembly Instructions Step-by-step assembly instructions for the Latitude Run Cantin Fluted Coffee Table (Model PEDL1108). Includes components list and assembly guidance.
	Latitude Run Octavian Coffee Table Owner Manual and Care Guide Comprehensive owner manual and care instructions for the Latitude Run Octavian Coffee Table, made from kiln-dried mango wood. Learn about routine care, deep cleaning, finish preservation, and environmental tips to maintain your furniture.
	Latitude Run GCCJ2155 Round Coffee Table Assembly Instructions Step-by-step assembly instructions for the Latitude Run GCCJ2155 Round Coffee Table with 6 Casters. Includes required tools, before you start checklist, and a detailed hardware list.
	Latitude Run 51.2" Modern Coffee Table Assembly Guide Step-by-step assembly instructions for the Latitude Run 51.2" Modern Coffee Table, including a parts list and important installation notices.
	Oval Drum Coffee Table Assembly Instructions \| Latitude Run Detailed assembly instructions and part list for the Latitude Run Oval Drum Coffee Table (Model bijs1079). Includes step-by-step guidance and customer service information.
	Latitude Run Outdoor Sofa Set Assembly Guide Step-by-step assembly instructions and parts list for the Latitude Run Outdoor Sofa Set (Model SNAI2238). Includes safety tips and product details for easy setup.
	Latitude Run GBIB4011 Coffee Table Assembly Instructions Comprehensive assembly instructions for the Latitude Run GBIB4011 coffee table. Includes a detailed parts list and step-by-step guidance for easy setup.