Latitude Run Outdoor Sofa Set Assembly Instructions
This document provides instructions for assembling the Latitude Run Outdoor Sofa Set.
ATTENTION
If you encounter any problems or have questions, please email or call Customer Service before returning this product to the store where it was purchased. When emailing Customer Service, please include your Order Number and platform of purchase in the email subject for quicker assistance.
Product Information
Product Name: Outdoor Sofa Set
Model Numbers: SNAI2238, W113397741
Brand: Latitude Run
Description: Rectangular Aluminum & HDPE Wicker Coffee Table and accompanying seating units.
Visual Description of Product: A line drawing shows a complete outdoor sofa set, consisting of a rectangular coffee table and two armchairs or seating units.
Assembly Instructions
Getting Started
Safety First: Please read and follow all safety tips.
- Before assembly, carefully use scissors or a utility knife to cut and unwrap all parts. Ensure you do not discard the hardware.
- Verify that you have all the parts listed. If any parts are missing, please email customer service. Provide the specific parts needed and the model number, along with your name and address.
- Include your Order Number and platform of purchase in the email subject for faster service.
Warm Tips:
- Plastic covers on some metal parts are for product protection only; please remove them before assembly.
- Follow the sequence of assembly as provided.
- Do not fully tighten screws until all components are in their correct positions.
Parts List
Part Identifier | Description | Quantity |
---|---|---|
A | Table Top | 1 |
B | Table Frame (Legs) | 2 |
C | Bolts (M6*35mm) | 8 |
D | Washer | 8 |
E | Allen Key | 1 |
Assembly Step 1
Position each Table leg (B) to the Table top (A) by aligning them with the pre-drilled threads. Use the Allen Key (E) to fasten the Bolts (C) with Washers (D). A total of 8 bolts should be fastened for this step.
Visual Description of Step 1: A close-up view illustrates the attachment of a table leg (B) to the underside of the tabletop (A). It shows a bolt (C) passing through a washer (D) and into a pre-drilled hole, secured by an Allen key (E). The diagram indicates that 8 bolts are used in total for this step.
Completion
You have completed assembling the furniture. Enjoy!
Visual Description of Completed Product: A line drawing of the assembled rectangular coffee table.