Hanwha Vision TNO-7180RLP Network Camera
Model: TNO-7180RLP
Brand: Hanwha Vision
Important Information
Please check 'Manuals' from the Hanwha Vision website before connecting to the supply:
https://www.hanwhavision.com/en/download-data/
It is recommended to use the officially compatible VMS version or the latest Hanwha NVR version when integrating with VMS or Hanwha NVR.
Videos processed by surveillance equipment cannot be accessed arbitrarily by the manufacturer.
Environmental and Disposal Information
Eco Mark: ♻️ RoHS compliant
Hanwha Vision is committed to environmental responsibility. The Eco mark indicates that the product satisfies the EU RoHS Directive.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories, or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent harm to the environment or human health, separate these items and recycle them responsibly.
Household users should contact their retailer or local government office for recycling details. Business users should contact their supplier.
Correct Disposal of Batteries
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking indicates that batteries should not be disposed of with household waste. If marked with Hg, Cd, or Pb, the battery contains mercury, cadmium, or lead above EU directive levels, which can harm health or the environment. Separate batteries for recycling through your local battery return system.
Safety Information
⚠️ Please observe the following safety precautions:
Unstable Mounting: A camera mounted on a cracking wall indicates potential structural issues or improper installation. Ensure secure mounting.
Environmental Hazards: Avoid exposing the camera to water (?) or fire (?) as it may not be protected against these elements.
Flammable Liquids: Do not expose the camera to flammable liquids (?⛽).
Components
Accessories may vary by country of sale.
- Network Camera Body
- Mounting Bracket
- Screws and Washers
- Various Cables (e.g., USB, power/network adapter)
- Dust Cap/Cover
Installation Guide
-
Step 1: Mount Base Plate
Attach the mounting base plate to the camera body. Use four TR30 Torx screws for this step.
-
Step 2: Attach Camera Body
Mount the camera body onto the prepared bracket. Secure it using two TR30 Torx screws.
-
Step 3: Connect Internal Cables
Identify and connect internal cables to the ports on the camera. Ports include RESET, USB, N, F, AF, W, and VIDEO.
-
Step 4: Secure Assembly
Ensure all parts are correctly aligned and secure the camera assembly with screws.
-
Step 5: Prepare Mounting Base
Insert mounting screws into the base plate.
-
Step 6: Install Seal/Cover
Place a seal or cover onto the mounting base.
-
Step 7 & 8: Cable Management
Continue assembling components and managing cables within the base, potentially related to power (HPOE) or network connections.
-
Step 9 & 10: Internal Connections
Complete internal connections, possibly for HPOE power or network interfaces.
-
Step 11 & 12: Final Cable Connections
Connect the remaining internal cables within the camera housing.
-
Step 13: Final Camera Mounting
Re-attach the camera body to the base and secure with four TR30 Torx screws. Ensure screws are tightened to a torque of approximately 10 Nm (Newton-meters).
-
Step 14: Accessory Notes
Note: WiFi Dongle and OTG adapter are not included. The camera features USB, SOFTAP, and VIDEO ports.
-
Step 15: Wisenet App Installation
Use the Wisenet Installation application on your smartphone (?) for setup.
-
Step 16: Adjust Camera Position
Adjust the camera's pan, tilt, and rotation as needed.
-
Step 17: Important Warning
⚠️ Right Side Warning: Do not touch a specific area on the right side of the camera as indicated.
-
Step 18: Software and Manual
Utilize the Device Manager software and the User Manual (?) for further configuration and operation. A checkered flag (?) indicates completion or readiness.
Setup and Configuration
Password Configuration
When accessing the product for the first time, you must register the login password.
Login Procedure
Whenever you access the camera, the login window will appear. Enter the username and password to access the camera.
- Enter "admin" in the <User Name> field.
- Enter the password in the <Password> field.
- Click [Sign in].
Password Requirements
- For a new password between 8 and 9 digits, use at least 3 uppercase/lowercase letters, 3 numbers, and 3 special characters.
- For a password between 10 and 15 digits, use at least 2 of the mentioned types (letters, numbers, special characters).
- Allowed special characters:
~`!@#$%^*()_-+=|{}[].?/ - For increased security, avoid repeating the same characters or consecutive keyboard entries.
- Remember your password; forgetting it will require resetting the product by pressing the [RESET] button.
WiFi Connection
Camera Setup
Connect the OTG adapter (5-pin) and the WiFi dongle to the micro USB terminal.
Smartphone Configuration
- Install the Wisenet installation application.
- Select the camera's SSID after turning on the WiFi.
- Run the Wisenet installation application.
- When you log in to the camera, the video will connect.
- You can adjust the viewing angle while watching the video via the smartphone.
Compliance and Distributor Information
The EAC mark indicates compliance with Russian technical regulations.
MicroSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC.
Turkish Distributors:
- EDS Elektronik Destek Sanayi ve Ticaret Ltd. Şti.
- ENTES ELEKTRONİK CİHAZLAR İMALAT VE TİC. A.Ş.
- TEKNOMAKS TEKNOLOJI / TEKNOMAKS BİLİSİM
The product's average service life is stated as 7 years.
