Important Information
Please check 'Manuals' from the Hanwha Vision website before connecting: https://www.hanwhavision.com/en/download-data/
For optimal integration, use the officially compatible VMS version or the latest Hanwha NVR version.
Videos processed by surveillance equipment cannot be accessed arbitrarily by the manufacturer.
Hanwha Vision is committed to environmental responsibility. The Eco mark indicates compliance with the EU RoHS Directive.
Product and Battery Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment):
This marking [WEEE symbol] indicates that the product and its electronic accessories should not be disposed of with household waste. Please separate these items and recycle them responsibly to promote sustainable reuse of material resources. Contact your retailer or local government office for environmentally safe recycling. Business users should consult their supplier.
Correct disposal of batteries in this product:
This marking [battery symbol] indicates that batteries should not be disposed of with household waste. Symbols like Hg, Cd, or Pb may indicate the presence of mercury, cadmium, or lead above EU directive limits. Improper disposal can harm human health and the environment. Separate batteries for recycling through your local, free battery return system.
Safety Information
⚠️ General Warning:
- Diagram: Camera mounted on a cracked bracket, indicating risk of falling or damage due to improper mounting.
- Diagram: Camera depicted near a snowman and flames, indicating a hazard related to extreme temperatures or fire.
- Diagram: Camera shown with an electrical hazard symbol, indicating a risk of electric shock.
Components
Accessories may vary by country of residence.
- Camera Unit with Mounting Base
- Cable with Connectors
- Mounting Bracket Piece
- Connector/Adapter
- Multi-wire Cable
- Flat Mounting Plate/Cover
- Long Screw/Bolt
- Set of Screws and Washers
- Circular Gasket/Mount Base
Installation Guide
Step 1
Mount the camera base. Secure with four TR30 screws. Torque: ≥ 10 Nm.
Step 2
Attach the mounting bracket to the camera. Secure with two TR30 screws.
Step 3
Connect cables to the designated ports (N, F, AF, W, RESET, USB, VIDEO). Various port configurations are shown, along with a general warning symbol.
Step 4
Connect the power/data cable using a screwdriver.
Step 5
Attach the mounting plate to the camera base. Secure with screws and washers.
Step 6
Connect a component (e.g., PoE adapter) to the base.
Step 7
Connect cable segments.
Step 8
Secure cable connections.
Step 9
View of the base unit with internal components.
Step 10
Connect a component labeled HPOE/HPOK to the base.
Step 11
Connect cables to the component.
Step 12
Final cable connections.
Step 13
Repeat mounting procedure. Secure with four TR30 screws. Torque: ≥ 10 Nm.
Step 14
Note: WiFi dongle and OTG adapter are not included. Connect the WiFi dongle and OTG adapter to the micro USB port. Connect to a device showing SOFTAP, RESET, and VIDEO ports.
Step 15
Use the Wisenet Installation mobile application.
Step 16
Adjust camera angle (pan, tilt, rotation). Secure the adjustment points with TR30 screws. Torque: ≥ 10 Nm.
Step 17
Warning: "Lato destro" (Right side). Diagram shows a hand attempting to adjust the camera mount on the right side, with a prohibition symbol ?, indicating caution or a specific procedure for this side.
Step 18
Final setup: Connect to Device Manager. Refer to the User Manual (PDF) for further details. Setup complete.
Initial Configuration
Password Configuration
Upon first access, you will be prompted to set a password.
Password Rules:
- For passwords 8-9 characters long, use at least 3 character types: uppercase letters, lowercase letters, numbers, and special characters.
- For passwords 10-15 characters long, use at least 2 character types.
- Allowed special characters: `~!@#$%^*()_-+=|{}[].?/
- Do not use more than 4 consecutive identical characters (e.g., "aaaa").
- Do not use more than 4 consecutive characters in sequence (e.g., "1234").
- Usernames cannot be used as passwords.
Remember your password. If lost, the product must be reset by pressing the [RESET] button.
Login Procedure
A login window appears each time you access the camera.
- Enter "admin" in the <User Name> field.
- Enter your password in the <Password> field.
- Click [Sign in].
WiFi Connection
Camera Setup: Connect the OTG adapter and WiFi dongle to the micro USB terminal.
Smartphone Setup:
- Install the Wisenet Installation application on your smartphone.
- Turn on WiFi and select the camera's SSID.
- Launch the Wisenet Installation application.
- Video will connect during the camera setup process.
- The camera's angle can be adjusted while viewing the live video feed on your smartphone.
Legal and Distributor Information
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
EAC Certification: Indicates compliance with Russian technical regulations. "Subject to use according to designation in normal conditions. Service life: 7 years."
Turkish Distributors:
- EDS Elektronik Destek Sanayi ve Ticaret Ltd. Şti.
Meclis Mah. Teraziler Cad. Hayran Sk. (Eskisi Kılıç Sk.) No: 4 Sancaktepe / İstanbul / Türkiye
Tel: +90.216.313.25.15 - ENTES ELEKTRONİK CİHAZLAR İMALAT VE TİC. A.Ş.
Dudullu Org.San.Bölg. 1. Cad. No:23 34776 Ümraniye / İstanbul / Türkiye
Tel: +90.216.313.01.10 - TEKNOMAKS TEKNOLOJI / TEKNOMAKS BİLİŞİM
MERDİVENKÖY MAH.DİKYOL SOK. BUSINESS İSTANBUL No:2, Kat:7, D:B67, 34732 Kadıköy / İstanbul / Türkiye
Tel: +90.212.217.54.22
The average lifespan of the device is recommended by the Ministry of Trade. The device is declared to be in compliance with EEE regulations.
