TRUE WIRELESS EARBUDS WITH CHARGING CASE

What's Included

The package contains:

• 1 × Charging box
• 2 × Earbud (L&R)
• 1 × Charging Cable
• 1 × Instruction manual

Product Image Description

The product is depicted as a pair of true wireless earbuds housed within a compact, oval-shaped charging case. The case is shown with its lid open, revealing two white earbuds securely seated inside. The case appears to have a textured finish, and a charging port is visible on its front.

Bluetooth Pairing Instruction

Pairing Process

1. Pick up two earbuds from the charging case to power them on. You will hear a "power on" audio cue, and the earbuds' LED lights will flash blue. After a few seconds, they will automatically pair with each other, indicated by two "dong dong" chimes from both earbuds.
2. Maintain a distance of within 10 meters between your device and the earbuds for optimal Bluetooth pairing.
3. On your device, enable the Bluetooth function, then search for and select the Bluetooth code "Soundmates".
4. Upon successful connection, you will hear "device connected," confirming that the Soundmates are ready for use.

Resetting Earbuds

Remark: There are two methods to reset the earbuds. If your Soundmates are not pairing to each other, place them back into the charging case, then remove them again; they will automatically attempt to pair.

Functions

Power On/Off

Power on: Remove both earbuds from the charging case.

Power off: Place both earbuds back into the charging case.

Music/Call Controls

1. Previous/Next Song: While music is playing, tap the left earbud three times to skip to the previous song. Tap the right earbud three times to skip to the next song.
2. Play/Pause: Tap the right earbud twice to play or pause music playback.
3. Answer/End Call: Tap either the right or left earbud twice to answer an incoming call. To end an ongoing call, tap either earbud twice again.

Wake Up Voice Assistant/Siri

Tap the left earbud twice. You will hear a beep, indicating that the Voice Assistant or Siri has been activated and is ready to receive your commands.

Charging

(Ensure the earbuds are fully charged before their first use.)

Charging the Box

• Connect the standard USB charging cable to the charging box and a powered USB port.
• The charging box's LED indicators will begin to flash GREEN while charging.
• The box is fully charged when the light stops flashing and remains a solid GREEN.

Charging the Earbuds

• Place the earbuds back into the charging box.
• The earbuds' LED indicators will turn RED, and the charging box's LED indicators will turn BLUE. Both sets of indicators will turn off once the earbuds are fully charged.

Specifications

• Bluetooth Version: 5.0
• Battery built-in earbuds: 30mAh*2, 3.7V
• Charging box battery: 250mAh, 3.7V
• Power output: 6mW
• Charging time for earbuds: 1H
• Charging time for station: 1H
• Music play time: Approximately 3 hours at maximum volume
• Talking time: Approximately 3 hours
• Frequency: 20-20KHZ
• Product size: 51.5*44*21MM

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

The device has been evaluated to meet general RF exposure requirements in portable exposure conditions without restriction.