Tzumi Soundmates ANC
Introduction & Features
Tzumi Soundmates ANC are your solution for true wireless freedom and high-quality audio. Stereo sound and active noise-cancelling technology let you hear music and phone calls the way they were meant to be heard, while the compact charging carry case makes them perfect for keeping up with everyday life.
Features:
- Noise-Cancelling
- 5hrs play/talk
- 4 x Recharge in case
- Bluetooth 5.0
- Auto-Pairing
Product Overview & Contents
The Soundmates ANC package includes:
- SOUNDMATES ANC earbuds
- Charging carry case
- Type-C cable
- Small, medium & large earbud tips
The earbuds feature touch controls and are designed to fit comfortably with ear tips.
Pairing With Your Devices
- Remove earbuds from the case.
- Open the Bluetooth pairing list on your device and click on “Soundmates ANC”.
- Your device should now be paired and ready for use.
A visual representation shows earbuds in a charging case and a smartphone displaying the Bluetooth menu with "Soundmates ANC" selected.
Charging
- Place earbuds in the case, and they will automatically begin charging if the case has remaining power.
- The indicator light on the charging case will flash red while charging.
- The earbuds' LED will light red while charging and turn off once fully charged.
- After a full charge, the lights on the case will turn solid red.
- Recharge the carry case via the included Type-C cable.
A diagram shows the earbuds inside the charging case, and a top view of the case indicating the LED light and charging port.
Controls
Power ON
- Remove your earbuds from the charging case to auto Power ON.
- Alternatively, touch the R or L earbud for 2 seconds to hear “Power On”.
Power OFF
- Place your earbuds back into the charging case.
- Alternatively, touch your earbuds for 5 seconds to hear “Power OFF”.
Answer Call
- Touch R or L earbud 1 time.
End Call
- Touch R or L earbud 2 times.
Rejecting a call
- Touch and hold R or L earbud for 2 seconds until you hear a prompt sound.
Play/Pause
- Touch R or L earbud 2 times.
Next Song
- Touch R earbud 3 times.
Rewind/Previous Song
- Touch the L earbud 3 times.
ANC MODE
- Touch and hold R earbud for 2 seconds until you hear “Noise Cancelling ON” or “Noise Cancelling OFF”.
Reset Earbud Pairing
- Remove both earbuds from the charging case.
- Ensure both earbuds are powered off. Touch both Left and Right earbuds for 10 seconds until you hear “Device Pairing”. This action clears connection records and all paired devices.
- The earbuds will auto-pair again and you will hear “Soundmates connected”.
- Open the Bluetooth pairing list on your phone and click on “Soundmates ANC” to connect your phone.
Remark: Make sure both earbuds are powered off before resetting.
Specifications
Specification | Details |
---|---|
Bluetooth Version | V5.0 |
Battery (Earbuds) | Lithium Battery (40mAh each) |
Battery (Charging Case) | Lithium Battery (500mAh) |
Charging Port | Type C |
Input Voltage | 4.5-5.5V (Supports max. 12V voltage protection) |
Earbuds Charging Time | 1.5h (approximately) |
Case Charging Time | 2.5 hrs (approximately) |
Playing Time (ANC is off) | 5 hrs (approximately) |
Playing Time (ANC is on) | 5 hrs (approximately) |
Case Recharged Earbuds | 4 Time (approximately) |
Standby time (earbuds in the charging case) | 180 days |
Frequency | 20-20k Hz |
Safeguards
- Do not use this unit for anything other than its intended use.
- Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquid.
- Do not expose the device to extremely high or low temperatures, as it may damage the battery.
- Do not operate the unit if it has been wet or moist to prevent against electric shock and/or injury to yourself and damage to the unit.
- Do not use the unit if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Keep the unit out of reach of children.
- This unit is not a toy.
BATTERY DISPOSAL:
This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SoundMates Distributed by tzumi Inc. NY, NY, 10016. ©Copyright 2021 tzumi Inc. All Rights Reserved. Made In China. All other trademarks and tradenames are the property of their respective owners. Subject to change without prior notice.
CE FC