ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

MD Sports BL084Y23006 Multi-Game Table

Model: BL084Y23006

Contact: 877-472-4296 | www.medalsports.com

90-Day Limited Warranty

This product is covered by a limited warranty effective for 90 days from the date of purchase. During this period, defective or broken parts will be replaced at no cost to the customer. Exceptions include mainframes, table tops, playing surfaces, batteries, or tools. The warranty does not apply to damages from improper usage, alteration, misuse, abuse, accidental damage, or neglect. This warranty grants specific legal rights, which may vary by state or province. A purchase receipt or other proof of purchase is required for warranty service. For assistance, please contact the Consumer Service Department. Medal Sports provides replacement parts only and cannot handle products outside the limited warranty period.

Please contact us before returning the product to the store.

Tools Required & Important Notices

Tools Required:

Phillips Screwdriver (Not Included)
Standard (Flat Head) Screwdriver (Not Included)
Allen Key (Included)
Wrench (Included)

Important Notices:

This product is intended for INDOOR use only.
Please do not sit, climb, or lean on the product.
Please do not drag the product when moving it to avoid damaging the legs.
Please use only furniture polish spray to clean the exterior surfaces of the product.
This is not a children's toy.
Adult assembly required.

Safety Precautions:

? Requires at least 6 adults for assembly.
? Keep children out of the assembly area.
? Keep pets away from the assembly area.
? Product is for indoor use only. Do not expose to wet or humid conditions.

Parts List

Part Number	Part Name	Quantity
1	Mainframe	x1
2	Leg	x4
3	Support Brace-A	x2
4	Table Top-A	x1
5	Table Top-B	x1
6	Bench Leg-A	x4
7	Bench Leg-B	x2
8	Bench	x2
9	Cue Rack Leg	x2
10	Cue Rack -Side Panel-A	x2
11	Cue Rack -Base Panel-A	x1
12	Cue Rack Leg	x2
13	Cue Rack -Side Panel-B	x2
14	Cue Rack -Base Panel-B	x2
15	Cue Holder Panel	x2
16	Cue Lock	x2
17	Cue Mount	x2
18	Cue Clip	x4
19	Adjustable Bracket	x1
20	Support Brace-B	x1
21	Leg Leveler	x4
22	Caster	x4
23	EVA Support	x1
24	Glue	x2
25	Net Post	x1
26	Net	x1
27	Bench Leg Panel	x8
28	Dowel	x3

Accessories

Part Number	Part Name	Quantity
29	Billiard Ball Set	x1
30	Cue	x2
31	Triangle	x1
32	Chalk	x1
33	Brush	x1
34	Table Tennis Ball	x2
35	Table Tennis Paddle	x2

Hardware

Part Number	Part Name	Quantity
A1	Bolt 5/16"x28mm	x16
A2	Bolt 1/4"x35mm	x58
A3	Bolt 1/4"x40mm	x4
A4	Bolt 1/4"x83mm	x4
A5	Bolt 1/4"x45mm	x12
A6	Washer 5/16"	x16
A7	Washer 1/4"	x80
A8	Screw 4x45mm	x16
A9	Screw 4x15mm	x2
A10	Nut 1/4"	x4
A11	Screw 4x30mm	x6
A12	Screw 3x15mm	x8
A13	Allen Key	x1
A14	Wrench-A	x1
A15	Wrench-B	x1

Pre-installed Parts

Part Number	Part Name	Quantity
P1	Square Nut with Screws 5/16"	x4
P2	5/16" Nut	x16
P3	1/4" T-Nut	x18
P4	Square Nut with Screws M10	x4
P5	Pad	x24

Assembly Steps

Step 1: Main Frame Assembly

Assemble the main frame by attaching Support Brace-A (23) to the mainframe (1) using eight A5 screws and eight A7 screws, secured with two A11 nuts.

Step 2: Bracket and Support Boards

Attach the adjustable bracket (18) and support boards (19) to the frame. Ensure these components are installed parallel to each other. Use two A2 screws, four A5 screws, four A7 screws, and two A9 screws.

Step 3: Leg Attachment

Attach the legs (2) to the assembled frame. Use four pre-installed P1 nuts and twelve pre-installed P2 nuts, along with sixteen A1 screws and sixteen A6 screws. Once assembled, carefully flip the table onto its legs.

Step 4: Bench Assembly

Assemble the bench. Attach the bench legs (6, 7) to the bench seat (8). Use fifty-six A2 screws and fifty-six A7 screws, along with twenty-four pre-installed P5 pads. This step is for two bench sets.

Step 5: Dining Top Placement

Place the dining tops (4 and 5) onto the assembled table. Use Support Brace-B (23) and Glue (27) for secure attachment. Leg Levelers (22) are used to adjust the table's height and stability.

Step 6: Table Tennis Net Setup

Set up the table tennis net. Attach the net posts (24) to the table edges using Casters (25) and Glue (27).

Step 7 & 8: Cue Rack Assembly

Assemble the cue rack. Connect the cue rack side panels (10, 13) to the base panels (11, 14) using parts 12 (x2), 13 (x1), 14 (x2) and sixteen A8 screws. Then, attach the cue holder panel (15) using four A3 screws, eight A7 screws, and four A10 screws. Use the Allen Key (A13) and Wrench-B (A15) as needed for assembly.

Step 9 & 10: Final Cue Rack Attachment

Attach the cue rack components to the main frame. Use four pre-installed P3 nuts and four pre-installed P4 nuts with parts 9 (x1), 10 (x2), 21 (x4) and hardware A7 (x4), A4 (x4), and A15 (x1). Then attach the cue rack base panels (16, 17) using four A11 screws and eight A12 screws.

Storage Instructions

Step 1: Prepare for Storage

Position the table for storage. Use part 29 (Cue) to help guide the table tennis top into its storage position.

Step 2: Secure Storage Position

Ensure the table tennis top is securely stored. Always keep the upper and lower snaps (A, B) in place to prevent the sides from falling.

Models: BL084Y23006 Game Table and Dining Table Freestanding, BL084Y23006, Game Table and Dining Table Freestanding, Table and Dining Table Freestanding, Dining Table Freestanding, Table Freestanding

File Info : application/pdf, 16 Pages, 1.82MB

4e40ea39-453b-4dc4-a725-0a25d850d6a9

References

Adobe PDF library 16.03 Adobe Illustrator 26.0 (Windows)

Related Documents

	MD SPORTS BL066Y22015 Billiard Table Assembly Instructions Comprehensive assembly instructions for the MD SPORTS BL066Y22015 billiard table, including parts list, tools required, step-by-step guidance, and leveling tips.
	MD SPORTS AH066Y23003 Air Hockey Table Assembly Instructions Official assembly guide for the MD SPORTS AH066Y23003 Air Hockey Table. Find step-by-step instructions, parts list, and setup tips from Medal Sports.
	MD SPORTS PK100Y24023 Poker Table User Manual User manual for the MD SPORTS PK100Y24023 poker table, including assembly instructions, care guidelines, and warranty information.
	MD Sports BG138Y22004 Assembly Instructions and Game Guide Comprehensive assembly instructions, game options, and electronic scorer operation for the MD Sports BG138Y22004 arcade basketball game. Includes parts list, safety guidelines, and warranty information.
	MD Sports Shuffleboard Table Assembly Instructions Comprehensive assembly instructions for the MD Sports Shuffleboard Table, model AC108Y19018. Includes parts list, hardware, and step-by-step assembly guidance in English, Spanish, and French.
	MD SPORTS BG138Y22001 Arcade Basketball Game Assembly Instructions Comprehensive assembly instructions for the MD SPORTS BG138Y22001 Arcade Basketball Game. Includes a detailed parts list, hardware guide, assembly steps, control box operation, game options, and safety information.
	MD Sports AC284Y21005 Roll and Score Arcade Game Assembly Instructions & Manual Comprehensive assembly instructions, parts list, and operation guide for the MD Sports AC284Y21005 Roll and Score Arcade Game. Includes warranty information and troubleshooting tips.
	MD SPORTS BG135Y22002 Arcade Basketball Game Assembly Instructions Comprehensive assembly instructions for the MD SPORTS BG135Y22002 Arcade Basketball Game, including parts lists, hardware details, assembly steps, electronic scorer operation, and game options. Features a 90-day limited warranty.