MD SPORTS PK100Y24023 Poker Table User Manual
Model: PK100Y24023
Contact: ? 877-472-4296 | ? www.medalsports.com
Limited 90 Days Warranty
This product is covered by a limited warranty effective for 90 days from the date of purchase. During this period, defective or broken parts will be replaced at no cost to the customer. Exceptions include mainframes, table tops, playing surfaces, batteries, or tools. The warranty does not apply to damages from improper usage, alteration, misuse, abuse, accidental damage, or neglect. This warranty grants specific legal rights, and you may have others that vary by state or province.
A purchase receipt or other proof of purchase is required for warranty service. For all warranty requests, please contact the Consumer Service Department.
Please note: Medal Sports cannot handle products outside their limited warranty period as they only provide available parts. For return/refund policies, please refer to the store where the product was purchased.
Contact Information for Service:
WE ARE READY TO HELP
DO NOT RETURN TO STORE
Please Contact MD SPORTS Customer Service Toll Free: 877-472-4296
Hours: Mon.-Fri., 9:00 a.m. to 5:00 p.m. EST
For additional resources and Frequently Asked Questions, please visit: ? www.medalsports.com
Tools Required
- Phillips Screwdriver - Not Included
- Standard Flat Head Screwdriver - Not Included
- Allen Key - Included ?
Recommended
Electric screwdrivers may be helpful during assembly. Use a low torque setting and exercise extreme caution.
[Diagram Description: Illustration of a power drill with a dial set to a low torque symbol, next to an icon of an overtightened screw indicating potential damage.]
Important Notices
- Please do not sit, climb, or lean on the product.
- Do not drag the product when moving it to avoid damaging the legs.
- This is not a children's toy.
- Assembly required.
[Icon Description: Two adult figures] At least 2 adults needed.
[Icon Description: A child figure inside a circle with a diagonal line through it] No children in assembly area.
[Icon Description: A dog figure inside a circle with a diagonal line through it] Keep away from pets in assembly area.
[Icon Description: A sun with a diagonal line through it, a house with a checkmark, and a water droplet with a diagonal line through it] Do not use or keep product outdoors. For indoor use only. Not suitable for wet/humid conditions.
Care Instructions
To prolong the life of your game, clean it regularly. Use furniture polish spray to clean the exterior surfaces. This will remove dirt, sweat, and other debris that can build up over time and damage the materials.
Parts Identifier
| Part | Part Name | Quantity |
|---|---|---|
| 1 | Mainframe | x1 |
| 2 | Leg | x1 |
| 3 | Cup Holder | x8 |
Hardware
| Identifier | Description | Quantity |
|---|---|---|
| A1 | M6x40mm Bolt [Diagram Description: Diagram of an M6x40mm bolt.] | x8 |
| A2 | M6 Spring Lock Washer [Diagram Description: Diagram of an M6 spring lock washer.] | x8 |
| A3 | M6 Washer [Diagram Description: Diagram of an M6 washer.] | x8 |
| A4 | Allen Key [Diagram Description: Diagram of an Allen key.] | x1 |
Pre-Installed Parts
| Identifier | Part Name | Quantity |
|---|---|---|
| P1 | Leg Leveler [Diagram Description: Diagram of a leg leveler.] | x4 |
Before Assembly
- Find a clean, level place to begin the assembly of your product.
- Verify that you have all listed parts as shown on the part list page. If any parts are missing, call customer service.
Assembly Instructions
Figure 2
Attach the leg levelers (P1) to the frame.
[Diagram Description: Diagram illustrating the assembly of the table's leg structure. Part P1 (Leg Leveler) is shown being attached to the frame. A warning box highlights the importance of ensuring safety supports are locked correctly, with a visual representation of two parts (A and B) engaging a locking mechanism.]
Note: Repeat for both ends.
Figure 3
Attach the legs and supports using the provided hardware (A1, A2, A3, A4).
[Diagram Description: Diagram showing the underside of the table frame with pre-drilled holes. Hardware components (A1 Bolt, A2 Spring Lock Washer, A3 Washer) are depicted ready for attachment to the frame using the Allen Key (A4). An arrow indicates the connection points for the legs/supports. A note emphasizes tightening all connections.]
Caution:
- Lift the table off the ground.
- Turn the table over.
- Place it on all feet at the same time on the ground.
Figure 4
[Diagram Description: Diagram showing the table being flipped over onto its legs.]
How to Fold the Game for Storage
Step 1
Fold this side first.
[Diagram Description: Diagram illustrating the folding mechanism. A hand is shown pressing a specific point on the frame to initiate the fold. A warning box emphasizes not trapping fingers during folding.]
Step 2
Repeat for both ends.
[Diagram Description: Diagram showing the table being folded in half. Arrows indicate the direction of movement. Labels indicate 'LONGER' and 'SHORTER' sides, suggesting how the table collapses.]
