HUVUDSPELARE Gaming Chair

Step 1: Assemble the Base

Connect the five base legs to the central hub. Ensure they are securely fitted.

Step 2: Attach Gas Lift and Secure Base

Insert the gas lift cylinder (124345) into the central hub. Secure the base legs using screws (122898) and washers (100842).

Step 3: Install Caster Wheels

Insert the five caster wheels (10069834) into the ends of the base legs.

Step 4: Mount Gas Lift to Base

Place the assembled base onto the gas lift cylinder.

Step 5: Attach Seat Mechanism

Attach the seat mechanism to the underside of the seat using screws (122900).

Step 6: Attach Armrests

Attach the armrests to the seat mechanism using screws (153693).

Step 7: Attach Backrest Support

Attach the backrest support structure to the seat mechanism using screws (10068195).

Step 8: Connect Backrest

Connect the backrest to the seat assembly. Use screws (123071) and the gas lift lever (124345) as shown in the diagrams.

Step 9: Combine Seat and Base

Place the assembled seat onto the gas lift cylinder.

Important Safety Warning: Energy Accumulators

Warning! Only trained personnel may replace or repair seat height adjustment components with energy accumulators.

Safety Castors

Our chairs have safety castors that brake automatically when no one's sitting in the chair. So it won't roll away when you stand up and you'll always find it where you leave it.

Chair Operation

Seat Height Adjustment

To adjust seat height, lift the lever [⬆️]. To lower, sit on the chair and lift the lever [⬆️].

Tilt Lock and Tension

The tilt function can be locked [?] or unlocked [?] using the lever. Tilt tension can be adjusted using the knob [➖ to ➕].