MATCHSPEL Gaming Chair Assembly Instructions
Product Code: AA-2255306-6
Brand: IKEA
Important Safety Information
ℹ️ Warning! Only trained personnel may replace or repair seat height adjustment components with energy accumulators.
For safety reasons, the casters lock automatically when the chair is not in use. ?
ℹ️ Always assemble on a soft surface like a rug to prevent scratching the chair or your floor.
ℹ️ Ensure all parts are correctly aligned before tightening screws. Do not force parts together.
Parts List
| Quantity | Description | Part Number |
|---|---|---|
| 1x | Allen Key | 124345 |
| 9x | Screw | 122134 |
| 6x | Screw | 128633 |
| 2x | Screw | 10068253 |
| 1x | Connector Bracket | (Not explicitly numbered) |
| 5x | Caster Wheel | (See numbers 10074975, 10074949, 10108989, 10109010 for reference) |
Assembly Instructions
Step 1: Attach Casters to Base
Insert the five caster wheels into the sockets on the five-star chair base. Push firmly until you hear a 'click' ?. Ensure they are securely attached.
[Diagram shows the five-star base and caster wheels being inserted into sockets. An inset shows a caster wheel being pushed into a socket until it clicks. A crossed-out caster indicates incorrect insertion.]
Parts: 5x Caster Wheels.
Step 2: Prepare Gas Lift
Insert the black protective cap into the top of the gas lift cylinder. Dispose of any packaging responsibly.
[Diagram shows the gas lift cylinder with a black cap being inserted into its top. An inset shows a trash can with a recycling symbol.]
Parts: 1x Gas Lift Cylinder, 1x Protective Cap.
Step 3: Attach Gas Lift to Base
Insert the gas lift cylinder into the central opening of the chair base. Ensure it is seated correctly.
[Diagram shows the five-star base with casters attached, and the gas lift cylinder being inserted vertically into the central opening.]
Parts: 1x Gas Lift Cylinder.
Step 4: Connect Seat Frame Components
Align and connect the two main components of the seat frame as shown. The connection mechanism should slide or click into place.
[Diagram shows two parts of the seat structure aligning for connection. An inset shows a close-up of the interlocking mechanism.]
Parts: Seat frame components.
Step 5: Attach Seat Cushion to Frame
Place the seat cushion onto the assembled seat frame. Apply firm downward pressure to secure it.
[Diagram shows the connected seat frame and the seat cushion being placed onto it with a downward arrow indicating pressure.]
Parts: Seat Cushion, Assembled Seat Frame.
Step 6: Attach Backrest Support to Seat
Align the backrest support bracket with the designated mounting points on the rear of the seat assembly. Secure using one screw (10068253) and the Allen key (124345). Ensure correct orientation; do not overtighten.
[Diagram shows the seat assembly and the backrest support bracket being aligned. An inset shows a close-up of screw insertion. Two small diagrams show correct and incorrect screw insertion.]
Parts: 1x Screw (10068253), 1x Allen Key (124345).
Step 7: Attach Armrests to Seat
Position the armrests on the sides of the seat assembly. Secure each armrest using two screws (128633) and the Allen key (124345).
[Diagram shows armrests being positioned on the seat assembly. An inset shows a close-up of screw insertion.]
Parts: 2x Armrests, 4x Screws (128633), 1x Allen Key (124345).
Step 8: Attach Backrest to Armrest/Seat Structure
Align the backrest panel with the mounting points on the armrest supports and seat structure. Secure using one screw (10068253) and the Allen key (124345). Ensure correct orientation; do not overtighten.
[Diagram shows the backrest panel being attached to the seat/armrest structure. An inset shows screw insertion. Two small diagrams show correct and incorrect screw insertion.]
Parts: 1x Backrest Panel, 1x Screw (10068253), 1x Allen Key (124345).
Step 9: Attach Backrest Cover/Cap
Attach the plastic cover or cap to the designated point on the backrest assembly.
[Diagram shows a plastic cover being fitted into a connection point on the backrest assembly.]
Parts: 1x Cover/Cap.
Step 10: Attach Seat Mechanism to Seat Cushion
Place the seat mechanism onto the underside of the seat cushion, aligning the screw holes. Secure using four screws (128633).
[Diagram shows the seat cushion upside down with the seat mechanism aligned on top. An inset shows screws being inserted.]
Parts: 4x Screws (128633).
Step 11: Connect Backrest Assembly to Seat Mechanism
Align the backrest assembly with the seat mechanism. Secure using three screws (122134) and the Allen key (124345).
[Diagram shows the backrest assembly being connected to the seat mechanism. An inset shows screws being inserted.]
Parts: 3x Screws (122134), 1x Allen Key (124345).
Step 12: Secure Backrest Assembly (Continued)
Continue securing the backrest assembly to the seat mechanism using three screws (122134) and the Allen key (124345).
[Diagram shows a closer view of the connection point from Step 11, with screws being inserted.]
Parts: 3x Screws (122134), 1x Allen Key (124345).
Step 13: Secure Backrest Assembly (Final)
Finalize the attachment of the backrest assembly to the seat mechanism using three screws (122134) and the Allen key (124345).
[Diagram shows another view of the connection point from Step 11/12, with screws being inserted.]
Parts: 3x Screws (122134), 1x Allen Key (124345).
Step 14: Connect Chair to Base
Carefully lower the assembled chair onto the gas lift cylinder attached to the base. Ensure it is seated securely.
[Diagram shows the fully assembled chair being lowered onto the gas lift cylinder on the base. An inset shows the gas lift cylinder top fitting into the seat mechanism.]
Parts: Assembled Chair, Chair Base with Gas Lift.
Using and Adjusting Your Chair
Seat Height Adjustment: To raise or lower the seat, lift the lever located under the seat. For best ergonomics, adjust so your feet are flat on the floor and your knees are at a 90-degree angle. [hand operating lever] [arrow up/down]
Armrest Adjustment: The armrests can typically be adjusted in height, and sometimes depth or angle. Use the levers or buttons located on the armrest supports. ? indicates a locked position, ? indicates an unlocked position for adjustment. [arrow indicating armrest movement]
Backrest Tilt: The backrest can usually be tilted backwards. Some models may have a tilt lock mechanism. Adjust to your comfort. [arrow indicating backrest tilt]
Headrest Adjustment: If your chair has a headrest, it can typically be adjusted in height and angle for optimal neck support. [arrow indicating headrest height adjustment]
Armrest Depth/Angle Adjustment: [double-headed arrow indicating armrest adjustment]
Castor Locking: For safety, the casters lock automatically when the chair is not in use. ?
