IKEA HUVUDSPELARE Gaming Chair
Assembly Instructions
Product Overview
This document provides assembly instructions for the IKEA HUVUDSPELARE gaming chair. Please ensure all parts are present before beginning assembly.
Parts List
| Quantity | Description | Part Identifier |
|---|---|---|
| 1x | Hex Key | 124345 |
| 5x | Casters | 10069834 |
| 2x | Screws | 10068195 |
| 8x | Screws | 122900 |
| 4x | Screws | 123071 |
| 10x | Screws | 122898 |
| 4x | Screws | 153693 |
| 10x | Washers | 100842 |
Assembly Steps
Step 1: Assemble the Base
Connect the five base support arms to the central hub. Ensure they click securely into place.
Visual Description: The five arms of the chair base are being attached to the central star-shaped hub.
Step 2: Attach Gas Lift Cylinder to Base
Place the assembled base on a flat surface. Insert five screws (122898) through five washers (100842) and into the designated holes on the base arms. Use the hex key (124345) to tighten them securely, attaching the gas lift cylinder housing to the base.
Visual Description: The gas lift cylinder is being attached to the center of the five-pointed base using screws and washers, with a hex key being used for tightening.
Step 3: Insert Casters
Insert the five casters (10069834) into the sockets at the end of each base arm. Push them in firmly until they are seated.
Visual Description: Five casters are being pushed into the ends of the chair base legs.
Step 4: Prepare Gas Lift Cylinder
Remove the protective cap from the top of the gas lift cylinder. ⓘ
Visual Description: A diagram shows a protective cap being removed from the top of the gas lift cylinder and placed into a trash bin with a recycling symbol.
Step 5: Mount Seat Assembly onto Gas Lift
Place the assembled seat mechanism onto the top of the gas lift cylinder. Ensure it is centered.
Visual Description: The seat mechanism is being lowered onto the top of the gas lift cylinder.
Step 6: Attach Mechanism to Seat
Align the chair mechanism with the mounting points on the underside of the seat. Secure it using four screws (122900) and the hex key (124345).
Visual Description: The chair mechanism is being attached to the underside of the seat using four screws and a hex key.
Step 7: Attach Armrests to Seat
Attach the armrests to the sides of the seat using one screw (122900) for each armrest. Tighten with the hex key (124345).
Visual Description: Armrests are being attached to the seat using screws.
Step 8: Attach Armrest Supports (Left)
Attach the left armrest support to the seat mechanism using two screws (153693). Tighten with the hex key (124345).
Visual Description: The left armrest support is being attached to the seat mechanism with screws.
Step 9: Attach Armrest Supports (Right)
Attach the right armrest support to the seat mechanism using two screws (153693). Tighten with the hex key (124345).
Visual Description: The right armrest support is being attached to the seat mechanism with screws.
Step 10: Attach Backrest Support to Seat
Align the backrest support with the rear mounting points on the seat mechanism.
Visual Description: The backrest support is being aligned with the seat mechanism.
Step 11: Secure Backrest Support
Secure the backrest support to the seat mechanism using one screw (10068195). Tighten with the hex key (124345).
Visual Description: The backrest support is being secured to the seat mechanism with a screw.
Step 12: Attach Armrest to Backrest Support
Align the armrest with the mounting holes on the backrest support. Secure it using one screw (123071). Tighten with the hex key (124345).
Visual Description: An armrest is being attached to the backrest support with a screw.
Step 13: Secure Armrest
Use the hex key (124345) to tighten the screw (123071) securing the armrest to the backrest support.
Visual Description: The screw securing the armrest is being tightened.
Step 14: Attach Backrest to Backrest Support
Align the backrest with the mounting points on the backrest support.
Visual Description: The backrest is being aligned with the backrest support.
Step 15: Secure Backrest
Secure the backrest to the backrest support using one screw (10068195). Tighten with the hex key (124345).
Visual Description: The backrest is being secured to the backrest support with a screw.
Step 16: Attach Armrest to Backrest Support (Second Side)
Align the second armrest with the mounting holes on the backrest support. Secure it using one screw (123071). Tighten with the hex key (124345).
Visual Description: The second armrest is being attached to the backrest support with a screw.
Step 17: Secure Second Armrest
Use the hex key (124345) to tighten the screw (123071) securing the second armrest to the backrest support.
Visual Description: The screw securing the second armrest is being tightened.
Step 18: Attach Armrest to Backrest Support (Final)
Attach the armrest to the backrest support using four screws (123071). Tighten with the hex key (124345).
Visual Description: The armrest is being attached to the backrest support with screws.
Step 19: Final Assembly
Place the assembled seat and backrest unit onto the gas lift cylinder. Ensure it is properly seated.
Visual Description: The complete chair seat and backrest assembly is placed onto the gas lift cylinder.
Important Safety Information
Warning: Only trained personnel may replace or repair seat height adjustment components with energy accumulators. ⓘ
Safety Castors
Our chairs are equipped with safety castors that automatically brake when no one is sitting in the chair. This prevents the chair from rolling away when you stand up, ensuring it remains in place where you left it.
