GRUPPSPEL Gaming Chair

Parts List

• Allen Key (1x) [Part Number: 124345]
• Screws (3x) [Part Number: 100181]
• Screws (8x) [Part Number: 128633]
• Screws (3x) [Part Number: 117317 / 192493]
• Washers (3x) [Part Number: 100843]
• Casters (5x) [Part Numbers: 10074949, 10078101, 10049061]
• Left Armrest Cover (1x)
• Right Armrest Cover (1x)
• Headrest Support Cover (1x)

Assembly Steps

Step 1: Attach Casters

Insert the five casters (5x) into the base. They should click into place.

[Visual: Base with five holes, casters being inserted.]

Step 2: Insert Gas Lift

Insert the gas lift cylinder into the center of the base.

[Visual: Gas lift cylinder being inserted into the base.]

Step 3: Connect Base to Seat Mechanism

Place the base assembly onto the seat mechanism. Rotate the base to align it with the mechanism.

[Visual: Base with casters and gas lift, seat mechanism being placed on top and rotated.]

Step 4: Attach Seat Mechanism to Seat

Align the seat mechanism with the underside of the seat cushion. Secure it using four screws (4x). Use the Allen key (124345) to tighten.

[Visual: Underside of seat cushion, mechanism aligned, screws being inserted and tightened.]

Step 5: Attach Armrests

Attach the left and right armrests to the underside of the seat cushion using three screws (3x) for each armrest. Use the Allen key (124345) to tighten.

[Visual: Underside of seat cushion, armrests being attached with screws.]

Step 6: Mount Seat Assembly to Gas Lift

Place the assembled seat onto the gas lift cylinder.

[Visual: Seat assembly being lowered onto the gas lift.]

Step 7: Attach Armrest Covers (Left)

Attach the left armrest cover to the left armrest.

[Visual: Close-up of left armrest, cover being slid into place.]

Step 8: Secure Armrest Covers (Left)

Secure the left armrest cover by pushing it until it clicks.

[Visual: Close-up of left armrest cover being pushed into place, showing a click.]

Step 9: Attach Armrest Covers (Right)

Attach the right armrest cover to the right armrest.

[Visual: Close-up of right armrest, cover being slid into place.]

Step 10: Secure Armrest Covers (Right)

Secure the right armrest cover by pushing it until it clicks.

[Visual: Close-up of right armrest cover being pushed into place, showing a click.]

Step 11: Attach Headrest Support

Attach the headrest support to the back of the seat using one screw (1x). Use the Allen key (124345) to tighten.

[Visual: Back of seat, headrest support being attached with a screw.]

Step 12: Attach Headrest

Attach the headrest to the headrest support.

[Visual: Headrest being attached to the support.]

Usage and Safety Information

Adjusting Seat Height

To adjust the seat height, pull the lever located under the seat. Pull [up] to raise, push [down] to lower.

[Visual: Hand pulling lever under seat, arrows indicating up/down movement.]

Adjusting Headrest

The headrest can be adjusted for height and angle. Use the levers on the headrest support to make adjustments.

[Visual: Chair with headrest, arrows showing adjustment points.]

Adjusting Armrests

The armrests can be adjusted for height and angle. Use the levers on the armrests to make adjustments.

[Visual: Chair with armrests, arrows showing adjustment points.]

Castor Locking

For safety, the casters lock automatically when the chair is not in use.

[Visual: Chair with casters, indication of locking mechanism.]

Important Safety Warning

[info] Warning! Only trained personnel may replace or repair seat height adjustment components with energy accumulators.

[Visual: Warning symbol ⚠️.]