Manuals+

NYXI Warrior Bluetooth Controller

Thank you for purchasing the NYXI Warrior Bluetooth Controller. Please read this manual carefully before use.

Package Contents

  • NYXI Warrior Wireless Controller ×1
  • USB-C ×2
  • Instruction Manual ×1
  • Replaceable Back Paddle ×1
  • Standard Stick ×1
  • Joystick Ring ×2
  • Adapter ×1

Image Description: A vibrant orange wireless controller with a layout similar to a GameCube controller. It features a D-pad, analog sticks, face buttons (A, B, X, Y), shoulder buttons (L, R, ZL, ZR), and additional buttons like Home, Turbo, and back paddles. The package contents image displays the controller along with its accessories: two USB-C cables, an instruction manual, a replaceable back paddle, a standard joystick, and two joystick rings.

Product Specifications

  • Brand: NYXI
  • Input Voltage: DC5V
  • Charging Current: 390mA
  • Operating Voltage: 3.4-4.2V
  • Operating Current: ≤290mA
  • Battery Capacity: 900mAh
  • Bluetooth Transmission Distance: ≤10M

First-time Use

When using the controller for the first time, please charge it using a USB cable and exit "lock mode".

Controller Diagram

Top View: The controller features a D-pad, two analog sticks (left and right), face buttons labeled A, B, X, Y, a Home button, a Turbo status LED, FL status LED, FR status LED, and a general Status LED. There are also L3 and R3 buttons.

Bottom View: The bottom of the controller shows L and R shoulder buttons, ZL and ZR triggers, a Pair button, and LED indicators.

Rear View: The rear of the controller has a Trigger Length Switch, M1/FL and M2/FR programmable back buttons, a Turbo button, and a back paddle switch.

Wake-up and Sleep Mode

Wake-Up Mode

Press the Home button to wake the console from sleep mode (when wirelessly connected).

Sleep Mode

  1. When the controller is on, pressing the pairing button puts it into sleep mode.
  2. If no connection is made within 60 seconds while in pairing mode, the controller automatically enters sleep mode.
  3. If there is no activity for 5 minutes while connected to the console, the controller enters sleep mode.

Connectivity

Nintendo Switch (NS)

  • Required System: NS 3.0.0 or above.
  • Pairing is only required for the first connection.
  • After the first pairing, pressing the Home button on the controller will automatically connect it to the NS console when it is in sleep mode.

Bluetooth Connection

  1. Press the Home button to turn on the controller.
  2. Press and hold the controller's pairing button for about 3 seconds to enter pairing mode; the status LED will blink purple rapidly.
  3. Go to NS settings, select "Controllers and Sensors", then "Change Grip/Order", and wait for the connection.
  4. Once connected, the status LED will remain solid purple.

Wired Connection

  • After a successful wired connection, pressing any button on the controller can wake it up.
  • After a wired connection, the controller can automatically connect to the NS via Bluetooth even if the USB cable is disconnected.
  • Connect the controller to the Switch via a USB Cable and wait for system recognition before playing.

Windows

  • Required System: Windows 10 or above.

Wireless Connection

  1. Connect the adapter to the computer using a short USB cable and press the adapter's pairing button for 3 seconds to enter its pairing mode.
  2. Press the controller's pairing button for 3 seconds to enter pairing mode and wait for connection. The status LED will blink blue rapidly.
  3. Once connected, the controller's status LED and the adapter's pairing button will remain solid purple.

Wired Connection

Connect the controller to the computer via a USB cable. The status LED will remain solid blue. Wait for the system to recognize the controller before starting to play.

Android

  • Required System: Android 10.00 or above.

Bluetooth Connection

  1. Press the pairing button and the A button simultaneously until the status LED blinks green.
  2. Open the Android device's Bluetooth settings, turn it on, pair with "Gamepad", and wait for connection.
  3. Once connected, the controller's status LED will remain solid green.

Wired Connection

Connect the controller to the Android device using a USB cable. The status LED will remain solid green. Wait for the system to recognize the controller before starting to play.

iOS

  • Required System: iOS 14 or above.

Bluetooth Connection

  1. Press the pairing button and the Y button simultaneously until the status LED blinks purple.
  2. Open the iOS device's Bluetooth settings, turn it on, pair with "Xbox Wireless Controller", and tap to connect. Wait for connection.
  3. Once connected, the status LED will remain solid purple.

Wired Connection

Connect the controller to the iOS device using a USB cable. The status LED will remain solid purple. Wait for the system to recognize the controller before starting to play.

GameCube

Wireless Connection

  1. Connect the adapter to the GameCube console and press the adapter's pairing button for 3 seconds until it blinks purple pink.
  2. Press the controller's pairing button for 3 seconds until the status LED blinks purple pink. Wait for the Windows device to recognize the controller before playing.
  3. Once connected, the controller's status LED and the adapter's pairing button will remain solid purple pink.

Wii

Wireless Connection

  1. Connect the Wii console's video cable to the TV, plug in the original adapter, power on the console, and insert the game disc.
  2. After starting the game, unplug the original adapter and plug in the NYXI adapter at the top of the Wii console.
  3. For the first-time pairing with the adapter, press the adapter's pairing button for 3 seconds until it blinks purple pink, then wait for the adapter and controller to pair.
  4. Press the controller's pairing button for 3 seconds until the status LED blinks purple pink. Once connected, the status LED and the adapter's pairing button will remain solid purple pink.
  5. For subsequent connections, simply press the HOME button on the controller to reconnect instantly with the adapter.

Turbo Function

  • Supported buttons for Turbo function: A, B, X, Y, L, R, ZL, ZR, D-pad.
  • Turbo function settings persist after powering off and may require manual clearing.
  • To quickly clear Turbo function settings, press and hold the Turbo button for 5 seconds. The controller will vibrate to indicate successful clearing.

Turbo Mode

  1. Turn on: Hold the button you wish to assign the Turbo function to, and press the Turbo button to activate Turbo mode, indicated by rapid blinking of the Turbo status LED.
  2. Turn off: Hold the button you wish to deactivate the Turbo function from, and press the Turbo button twice to disable Turbo mode, indicated by the Turbo status LED turning off.

Auto Turbo Mode

  1. Turn on: Hold the button you wish to assign the Turbo function to, and press the Turbo button twice to activate auto Turbo mode, indicated by rapid blinking of the Turbo status LED.
  2. Turn off: Hold the button you wish to deactivate the Turbo function from, and press the Turbo button to disable auto Turbo mode, indicated by the Turbo status LED turning off.

Speed Adjustment

  1. Turbo speed can be set to Fast, Medium, or Slow, with Medium as the default. The blinking frequency of the Turbo status LED corresponds to the turbo speed.
  2. To adjust Turbo speed, hold down the Turbo button and simultaneously tilt the right joystick up or down. Tilt up to increase speed, tilt down to decrease speed.

Programmable Back Button Function

  • Supported buttons for programmable function: A, B, X, Y, L, R, ZL, ZR, L3, R3, D-pad, -, +.

Setup

  1. Hold the Setting button and press the back button (FL/FR) to enable customization mode, indicated by rapid blinking of the FL/FR status LED.
  2. Press the button you want to program, then press the Setup button again. The FL/FR status LED will remain solid blue.

Clearing Settings

  1. Hold the Setting button and press the back button (FL/FR) for a few seconds. After releasing, the FL/FR status LED will blink slowly.
  2. Press the Setting button again to clear the programming; the FL/FR status LED will remain solid white.
  3. To quickly clear programmable settings, hold the Setting button for 3 seconds. The joystick will vibrate to indicate that all programmed settings have been successfully cleared.

Battery Status

StatusLED Indicator
Low BatteryGreen light flashing
ChargingGreen light flashing
Fully ChargedGreen light off when not connected / Solid green light when connected

Reset Function

In case of controller malfunction, perform a reset by holding down the Home button for 5 seconds.

WARNING

  • Contains small parts. Please keep out of reach of children under 3 years old.
  • Avoid using the product near sources of fire.
  • Do not disassemble or modify the product yourself.
  • Do not expose the product to damp or dusty environments.
  • Do not use the product for purposes other than its intended use.
  • Follow local regulations for proper disposal of the product and its components; do not dispose of them as household waste.

If you have any questions or need assistance, please contact NYXI's support team at support@nyxigame.com.

Models: SP04, SP04 Warrior Bluetooth Controller, Warrior Bluetooth Controller, Bluetooth Controller, Controller

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7321403 Adobe PDF library 15.00 Adobe Illustrator CC 23.0 (Windows)

Related Documents

Preview NYXI Warrior Bluetooth Controller User Manual
This user manual provides instructions and specifications for the NYXI Warrior Bluetooth Controller, compatible with NGC, NS, Wii, and Windows. Learn about setup, connectivity, turbo functions, and more.
Preview NYXI Wizard 2 Bluetooth Controller User Manual
User manual for the NYXI Wizard 2 Bluetooth Controller, detailing setup, connectivity for Nintendo Switch, NGC, Wii, PC, and advanced features like calibration and turbo mode.
Preview NYXI Wizard 2 Bluetooth Controller Manual
User manual for the NYXI Wizard 2 Bluetooth Controller, compatible with Nintendo Switch, NGC, Wii, and PC. Includes setup instructions, technical specifications, and calibration guides.
Preview NYXI WIZARD 2 Bluetooth Controller User Manual | Nintendo Switch, NGC, Wii, PC
Comprehensive user manual for the NYXI WIZARD 2 Bluetooth Controller. Learn how to connect to Nintendo Switch, PC, and Wii, calibrate joysticks and triggers, use turbo functions, and program buttons. Includes technical specifications and safety precautions.
Preview NYXI Flexi Wireless Controller User Manual and Specifications
This document provides comprehensive information on the NYXI Flexi Wireless Controller, including compatibility details for Windows, Android, iOS, and Nintendo Switch, setup instructions, technical specifications, and safety precautions.
Preview NYXI Master P1 Wireless Controller - User Manual and Specifications
Comprehensive guide for the NYXI Master P1 wireless controller, covering compatibility, setup instructions, technical specifications, and precautions for PC, Nintendo Switch, iOS, and Android devices.
Preview NYXI Hyperion Pro Wireless Controller for Nintendo Switch, Lite, OLED - User Manual
Comprehensive user manual for the NYXI Hyperion Pro wireless controller, detailing setup, features like turbo functionality, light and vibration adjustments, and firmware updates for Nintendo Switch, Switch Lite, and Switch OLED.
Preview NYXI NJ10 Controller User Manual and Specifications
This document provides a comprehensive guide to the NYXI NJ10 controller, including package contents, specifications, connection instructions for Nintendo Switch, PC (XInput and DInput modes), and NGC, as well as calibration and function details.