NYXI Flexi Wireless Controller
Model: NP05
Compatibility
The NYXI Flexi Wireless Controller supports the following platforms and operating systems:
- Android 10.0 and above
- iOS 14 and above
- Nintendo Switch (NS) 3.0.0.0 and above
- Windows 7, 8, 10, and 11
Packaging Contents
The package includes:
- NP05 Gamepad * 1
- Receiver * 1
- Charging Cable * 1
- Instruction Manual * 1
Technical Parameters
- Model: NP05
- Input: 5V/0.5A
- Material: PC+ABS
- Size: 110*160*70mm
- Weight: 262g
- Battery Capacity: 800mAh
- Charging Time: Approximately 2.5 hours
- Battery Life: 6-8 hours
Product Overview
The controller features a ergonomic design with the following components:
Front View:
- Top Buttons: TURBO button (left), M Button (right, labeled 'Start').
- Left Side: Left Analog Stick, D-Pad (cross-shaped directional buttons).
- Face Buttons: Four primary action buttons labeled Y (top), X (left), B (right), A (bottom).
- Center Buttons: T button (left), M button (middle), Home button (right).
- Right Side: Right Analog Stick.
- Grip Areas: Feature a hexagonal texture for enhanced grip.
Top/Shoulder Buttons:
- Left Shoulder: L1 (inner), L2 (outer).
- Right Shoulder: R1 (inner), R2 (outer).
- Port: USB Type-C Charging Port located centrally.
Back Side:
- Programmable Buttons: Four M buttons labeled M1 (top right), M3 (bottom right), M2 (top left), M4 (bottom left).
- Control Buttons: RESET button (center left), Light adjustment button (center right).
Instructions for Use
First-time use:
Before first use, connect the controller to the charging cable to charge and activate it. The controller can only be powered on and used after charging is active.
Wired Connection:
Connect the controller via a data cable. The connection will be automatically recognized.
Receiver Connection:
After turning on the controller, insert the receiver into the computer's interface. Bring the controller close to the receiver, and the connection will be automatically recognized.
Wireless Connection (PC):
When the device is off, press and hold the A+HOME button for 3 seconds to turn it on. Then, search on your PC and click "Xbox Wireless Controller" to connect.
Wireless Connection (NS):
When the device is off, press and hold the B+HOME button for 3 seconds to turn it on. Then, search and pair on your NS (Nintendo Switch) to connect.
Declarations and Compliance
Declaration of Conformity
The NYXI NP05 product conforms to EC standards for radio interference. Shenzhen MIKE Morgen Technology Co.,Ltd. announces that the NP05 radio equipment conforms to the relevant EU Directives and standards, including EN IEC 62368-1, EN 50663, EN 62479, ETSI EN 301 489-1, ETSI EN 301 489-17, and ETSI EN 300 328.
The full text of the EU Declaration of Compliance can be found on: www.nyxigame.com
FCC Statement
Model: NP05, FCC ID: 2A88F-NP05
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase distance between the equipment and receiver.
- Plug the equipment into a socket on a circuit different from that to which the receiver is connected.
- Consult your distributor or an experienced radio/TV technician for help.
Precautions
- ⚠️ Do not expose it to liquid.
- ❌ Do not disassemble it.
- ⚠️ Avoid dropping it.
- ?️ Avoid extremely high or low temperature.
The symbol ♻️ indicates that the product should not be disposed of with household waste but brought to an appropriate collection point for recycling. Appropriate disposal helps prevent negative impacts on the environment and human health.
