Introduction
Thank you for purchasing the NYXI Master P1 Wireless Controller. This manual provides essential information regarding its features, compatibility, and usage.
Compatibility
- Supports Android 10.0 / iOS 14 and above.
- Supports Nintendo Switch (NS) 3.0.0.0 and above.
- Supports PC (Windows 7/8/10/11).
Packaging Contents
- NYXI Master P1 Game Controller *1
- A-C Charging Cable 2m *1
- Receiver *1
- User Manual *1
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | NP01 |
| Input Parameters | 5V/0.6A |
| Material | PC+ABS |
| Battery Capacity | 600mAh |
| Charging Time | Approximately 2.5 hours |
| Battery Life | Approximately 8 hours |
Controller Layout
The controller features a familiar ergonomic design with various buttons and controls:
Top View:
- Left Side: D-Pad (Directional Pad), Left Analog Stick (Joystick), Mute Button, Settings Button.
- Center: Home Button, Share Button, Menu Button.
- Right Side: A/B/X/Y Action Buttons, Right Analog Stick (Joystick).
- Top Shoulder Buttons: L (Left) and R (Right) buttons.
- Top Triggers: LT (Left Trigger) and RT (Right Trigger).
Bottom/Rear View:
- Bottom Center: Type-C Charging Port, Trigger Mode Switch.
- Rear Left/Right: M1 and M2 Programmable Buttons, M1 Lock Switch and M2 Lock Switch.
- Connection Mode Indicator is also present on the rear.
Instructions for Use
For detailed instructions and advanced features, please refer to the QR code provided in the original manual.
Connection Methods:
- First-time Connection: The controller must be connected to the charging cable and powered on after charging activation.
- Receiver Connection: Switch the toggle to the receiver position, press the Home button to power on and enter pairing mode. The receiver will automatically pair.
- Wired Connection: Connect the controller via the USB cable. The controller will automatically power on and connect.
- Bluetooth Connection: Switch the toggle to the Bluetooth position, press the Home button to power on. Search for "Master P1" on your device and connect.
- NS (Nintendo Switch) Connection: Switch the toggle to the NS position. In NS settings, navigate to "Controllers" > "Change Grip/Order" and wait for automatic connection.
Additional Functions:
- Auto-Reconnect: Press the Home button on the controller to automatically reconnect to the last paired device.
- Forced Pairing: If the controller is off, long-press the Home button for 3 seconds to enter forced pairing mode.
Compliance and Safety
This product complies with relevant EC standards for radio interference and FCC regulations.
Disposal: The product should not be disposed of with household waste. Please use appropriate collection points for recycling. Proper disposal of used products and rechargeable batteries helps prevent negative environmental and health impacts.
Precautions:
- Do not expose to liquid.
- Do not disassemble the controller.
- Avoid dropping the controller.
- Avoid exposure to extremely high or low temperatures.
For the full text of the EU Declaration of Compliance, visit: www.nyxigame.com
