NYXI NJ10 Controller User Manual and Specifications

Package Contents

The package includes:

• NJ10 Left Controller ×1
• NJ10 Right Controller ×1
• NJ10 Central Bridge ×1
• Multi-function Receiver ×1
• USB-C Cable ×1
• Extension Cable for Receiver ×1

Product Specifications:

• Connection: Bluetooth 5.0, 2.4 GHz
• Battery: 400 mAh (per controller)
• Charging: 5 V/0.4 A (USB-C)
• Materials: PC + ABS + Metal + Silicone
• Weight: 225g
• Dimensions: 106*155*65.5mm

Structure Diagram

The controller features:

• LED Channel Light
• Screen Button
• Joystick Hall TMR
• Directional Pad
• + Button
• Home Button
• ABXY Microswitch Buttons
• C-Stick TMR Hall Joystick
• Configuration Button
• Type-C Port
• R Button
• L Button
• Lock Button
• ZR/ZL Hall Linear Trigger
• MR Button
• ML Button
• Left/Right Trigger Locks
• SL Button
• SR Button
• Reset Button

Connection to Nintendo Switch

1. Slide the controller along the console rails until it clicks. The "Controllers" interface will display the connected controllers. [arrow-down]
2. To remove the controller, press the release button on the back and slide it upwards. [arrow-up]
3. If the console is powered on, detaching the controller will establish an automatic Bluetooth connection. [bluetooth-icon]
4. If the console is powered off, press the Home button after detaching to reconnect. [hand-icon]
5. After successfully connecting to the Switch game host, the controller will vibrate for 1 second. [vibration-icon]

Connection to PC via Receiver (XInput Mode)

1. Press and hold the Home button for 3 seconds (LEDs 1-4 flash green).
2. Connect the receiver to the PC and press its button until the LED flashes rapidly.
3. Wait for pairing. [finger-pointing-icon] -> LEDs 1-4 flash green -> PC [computer-icon]

PC-Xinput

Connection to PC via Receiver (DInput Mode)

1. In Xinput mode, press and hold A + B + Home to switch to Dinput mode (LEDs flash three times).
2. Repeat the combination to return to Xinput mode.

PC-Xinput -> A B [up-arrow] -> PC-Dinput

PC-Xinput <- A B [up-arrow] <- PC-Xinput

Receiver Connection PC/NGC

To power on the device, press and hold the home button on the right handle for 5 seconds. LEDs 1-4 on the right handle will flash green rapidly.

Connect the receiver to the computer and press and hold the receiver's button until the LED light flashes rapidly. Wait for the correct handle and receiver to pair successfully; the LED lights of the handle and receiver will turn on.

[finger-pointing-icon] 5 seconds -> Controller flashes green light -> NGC [console-icon] / PC [computer-icon]

Press and hold the button. [hand-pointing-icon] -> R Controller [controller-icon]

Receiver Connected to Wii

Turn on the Wii console, access the game, and connect the original controller. After entering the game, disconnect the original adapter, then connect the NJ10 receiver to the console and press and hold the receiver's button until the LED light flashes rapidly.

Press and hold the home button on the right handle for 5 seconds to power on the device. LEDs 1-4 on the right handle will flash green rapidly.

Wait for the correct handle and receiver to pair successfully; the LED lights of the handle and receiver will turn on.

[power-icon] -> Connect receiver [receiver-icon] -> Press and hold [hand-pointing-icon] for a long time -> Controller flashes green light [controller-icon] 5 seconds -> R Controller [controller-icon]

Joystick Calibration

1. Press SL + SR + + (left controller: - button) simultaneously, rotate the joysticks, and repeat the same button to exit (1-second vibration confirmation).

SL SR + (SL SR -) [arrow-down]

Rotate the joystick [circular-arrow-icon].

1-second vibration confirmation [vibration-icon] [arrow-down]

SL SR + (SL SR -) Exit

Trigger Calibration

Press SL + SR + Home (left controller: Capture button), press the triggers fully, and repeat to exit (vibration confirmation).

SL SR Home (SL SR Capture) [arrow-down]

Press the trigger [trigger-icon].

Vibration confirmation [vibration-icon] [arrow-down]

SL SR Home (SL SR Capture) Exit

6-Axis Gyro Calibration

1. On Switch: Go to Settings > Controllers > Calibrate Motion Controls.
2. Place the controller on a flat surface and follow the on-screen instructions. Press - and +.

Turbo Function

• Supported Buttons: Directional Pad, A, B, X, Y, L, R, ZL, ZR.
• Activation: Press and hold the Configuration button, then press and release a target button (LED4 lights up white).
• Speed: Default 12 Hz (adjustable via app).
• Deactivation: Press Configuration + target button three times (LED4 turns off).

Button Programming

Back Buttons (M1/M2): Assignable to other buttons or macros (max. 21 actions per macro).

1. Assign: Press and hold Configuration + back button for 3 seconds, press the desired sequence, and press the back button again to save.

[gear-icon] + ML or MR -> D-pad, A, B, X, Y, L, R, ZL, ZR... max 21 actions per macro [arrow-right]

x3 Seconds

ML or MR

1. Clear: Press and hold Configuration + back button for 3 seconds, then press the back button without any input.

[gear-icon] + ML or MR -> ML or MR

x3 Seconds

Declaration of Conformity

Model: NJ10

FCC ID: 2A88F-NJ10

The product conforms to EC standards for radio interference. Shenzhen MIKE Morgen Technology Co.,Ltd. announces that NJ10 radio equipment conforms to the Directive. EN IEC 62368-1:2020+A11:2020, EN 50663:2017, EN 62479:2010, ETSI EN 301 489-1 V2.23(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09), ETSI EN 300 328 V2.2.2(2019-07).

The full text of the EU Declaration of Compliance can be found on: www.nyxigame.com

FCC Statement

Model: NJ10

FCC ID: 2A88F-NJ10

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. The device may not cause harmful interference.
2. The device must accept any interference received, including that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase distance between the equipment and receiver.
• Plug the equipment into a socket on a circuit different from that to which the receiver is connected.
• Consult your distributor or an experienced radio/TV technician for help.

The symbol [recycle-symbol] means the product should not be disposed of with household waste but be brought to an appropriate collection point to enable recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste.

Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.

Precautions

• Do not expose it to liquid [droplet-icon]
• Do not disassemble it [cross-mark-icon]
• Avoid dropping it [cross-mark-icon]
• Avoid extremely high or low temperature [thermometer-icon] [cross-mark-icon]